Shandong Yuesheng 10HL Brewhouse (2020)

Shandong Yuesheng Sudhaus

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery - 4 units Brewhouse | Shandong | 20-25HL | 2019 - 1x mash tun - 1x lauter tun - 1x boiling or wort tun Gsdpfxeyb N N As Ap Debu - 1x whirlpool - Manual shut-off valves - Cooling of fermentation tanks is automated - Malt mill | Shandong | 2019 - Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 - 200 kg/ h - Oil-fired, but can also be operated with gas by replacing the burner - Wort cooler, 2-stage | Shandong | 2019 - 2x cooling unit (glycol) | 2019 - 2x 28kW - Glycol tank - Hot water tank - 6x Fermentation tanks | 2760l | 2019 - 3 bar, insulated with jacket cooling, CIP capable - 12x Storage tank | 2760l | 2019 - 3 bar, no cooling, were in a separate cold room - Reverse osmosis - Compressor | JAN | 585l/ min | 2020 - KEG filling - 1x drum washer with automatic caustic refill and steam-heated - 1x keg filler - Up to 70 barrels/ h, - Fitting: Type S, basket fitting, - Siemens S7 - Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc.

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Length: 2600 mm Width: 5000 mm Gbjdpfjw U A T Ijx Ap Dou Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Gbedpfx Apsxfvh Se Dju

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process Gbsdpfju I Hr Ujx Ap Deu - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725 hours

Condition: excellent (used), tank capacity: 600 l, We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Gsdpfxovdb A Ns Ap Dobu Manufacture: AGA CRYO Volume: 600 litres; Working pressure: 17,5 bar We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Year of construction: 2018, Overview  This brewhouse was manufactured in 2018 by Slovenian company SKRLJ d.o.o. The BH-3 brewhouse has a batch capacity of 20 hL and is designed as a semi-automatic system with steam heating. It includes all main process vessels and a wide range of accessories, making it suitable for medium-sized breweries. The system is currently available. Technical data - Capacity: 20 hL per batch - Hot water tank: 4,586 L, steam heating jacket - Cold water tank: 4,400 L, glycol cooling jacket - Heating: Steam - Control: Semi-automatic with PLC Scope of Delivery  - Brewhouse | SKRLJ d.o.o. | BH-3 | 2018 | 20 hL, semi-automatic, steam-heated - Hot water tank | SKRLJ d.o.o. | – | 2018 | 4,586 L, steam heating jacket - Cold water tank | SKRLJ d.o.o. | – | 2018 | 4,400 L, glycol cooling jacket - Grist bin | SKRLJ d.o.o. | – | 2018 | 500 kg capacity - 2-stage heat exchanger | SKRLJ d.o.o. | – | 2018 | Stainless steel - Accessories: wort aeration system, spent grain remover, grist hydrator, CIP sprayballs, temperature probes, steam jacket solenoids, 2 sanitary centrifugal pumps, electronic flow meter, manual cold/hot water mixer with thermometer, PLC for pump/recipe/temperature control Gbedpfsxcng Ijx Ap Dsu  

Year of construction: 1991, condition: used, 2 vessel brewhouse, copper cladded (knock-out wort 13 hl). Both brewing vessels are constructed from stainless steel with copper cladding. The wort kettle is equipped with electrical heating mats. Alternatively the kettle could be retrofitted for heating via steam, which would be possible with relatively low additional investment. Gbsdsxbn R Djpfx Ap Dsu Additional title: 13 hl knock-out wort Capacity: 13 hl/brew Duration per brew approx.: 8 h Power: approx. 34 kW (heating mats) Material: stainless steel, copper cladded Features: 1 mash-/lauter-tun, 1 wort kettle with hop strainer (electric heating, heating zones: 2 x frame, 1 x bottom), both vessels with temperature display, 2 Hilge pumps (type: Durietta I-200-5/0,25/4, (Q: 2 - 3 m³/h, H: 5.0 m)

Condition: new, Year of construction: 2025, Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm; label width (backing paper width): 10-150mm; bottle diameter25-130mm; inner diameter of the label roll: 76mm; max. outer diameter of the label roll: 300mm; label precision: ± 1mm; production capacity: max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 50Hz/60Hz. Gbjdpfov Nk Sdox Ap Deu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2015, Ziemann 300hl Brewhouse System with Mill Room for sale Year 2015, upgraded in 2020. Capable of 16 Brews per day, due to 2nd Lauter tun added in 2020 Location: UK Gjdpfett S Sxox Ap Dobu Get in touch with Indassol for further information and pricing

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Gbodpfsztpxmsx Ap Dsu