Blowing Machine SIDEL

Sidel SBO 6

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Nwsdpfxsx A Uu Es Aa Dob Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. Nwedpfx Aovgu D Sja Dob The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING Nedpjg Ailcofx Aa Dewb The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2005, Used Blow Moulding Machine Sidel SBO6 2 Year 2005 – 9000 bph The machinery has been disconnected from the functioning production. The PLC is present, and its functionality is ensured. The machinery as a whole is in a good state of maintenance, pre-production maintenance is still recommended because the blow molding machine has been in storage for about 12 months. Transport is a large load, therefore outside the normal gauge. We can supply all necessary spare parts for this blow molding machine. Nwedpfx Aaovguxvo Deb

Condition: used, functionality: fully functional, The SMF COMBI 400 is an automatic blow molder designed for the efficient and high quality production of PET bottles. This machine combines advanced technologies to offer continuous, accurate operation with minimal manual intervention, ideal for bottling plants requiring flexibility and performance. ADVANTAGES OF HS AND COMBI SERIES: • Low energy consumption • Modular construction • Silent work • Space saving, compact design • Easy change- overo f bottle size and types of neckrings • Advanced PLC control system with user friendly interface • Built-in memory of the PLC saves parameter sets required to produce different bottle sizes. • Pyrometric temperature measurement – Power Wizard Nsdswny Eiepfx Aa Dowb KEY BENEFITS • Proven system working in hard environmental conditions • Powerful heading unit with precise controller and convenient adjusting mechanism • Minimum transfer space for the air distribution system • Simple, robust and durable operation MAIN PARAMETERS Blowing air quantity (25 BAR): 3.46 m3/h Mold material: FORTAL

Condition: used, Year of construction: 2022, Linearly aligned can filler with rinser, filler, lid depositor and seamer in one block. Counter-pressure filling is controlled volumetrically. Format changeover for all standard can sizes. Capacity: 2000 cans/h for carbonated drinks Njdpfxsxbn Ice Aa Dewb Max. oxygen pickup on the filler: 25 ppb Compressed air: IG 1/2", 6-10 bar Length: 2774 mm Width: 1100 mm Height: 2000 mm Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible Operation / Control: Siemens Simatic S7 Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW

Condition: used, Year of construction: 2008, Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute Nodpfxeplgmbe Aa Dswb

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Nsdpfswa Rhrox Aa Djwb Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 Nwedpfx Aajxz Ayto Dob - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler - Number of stations: 15 - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard - Year: 2009

Condition: used, Year of construction: 2003, operating hours: 19,500 h, Used Blow Molding Machine Sidel SBO 2003 We have a Used Blow Molding Machine available for purchase, the Sidel SBO 2003, with the reference. The machine was manufactured by Sidel in 2003 and has a model of SBO 12. It has a speed of 17000 BPH and is suitable for creating PET containers. This particular machine has 12 cavities and comes equipped with a preform loader, preform tipper, and preform unscrambler. It also has an air recovery system and is a rotary type. The preform neck types it supports are 1881 and 2925 neck. The machine is currently in a ready state for operation and has safety features installed. It also comes with manuals and has been in operation for 19500 machine hours. Nwodpfx Ajvr S Tnea Djb If you’re interested in purchasing this machine, please let us know.