Blowing Machine SIDEL

Sidel SBO 6

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Bsdpfxeg Ailcj Adloww Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2011, Carbon dioxide laser for label marking. Supports high line speeds. Laser-optimised fonts for high-speed marking, including standard fonts and els can also be marked with graphics (*.bmp, *.plt, *.dxf formats). Over 60 different types of barcodes can be printed on labels, as well as traceability codes and serialisation data. Operation via graphical user interface. Extraction of smoke and dirt by Domino DPX 1500 and DPX 3500. Additional title: label marking Bwjdpsxwzb Iofx Adljw Capacity: 40000 Fl/h Wavelength laser: 10 µm Ambient temprature: 40 °C Air humidity: 90 % RH non condensing Power: 1,05 kW Voltage: 90 - 264 V Frequency: 47 - 63 Hz Features: control touch panel, extraction systems DPX 1500 and DPX 3500

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Bwedpfex A Uu Esx Adlow Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: new, functionality: fully functional, Year of construction: 2026, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Bwedpfx Aevd Aavedljw Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany