Electronic module ET 200S

Siemens 6ES7 135-4GBO1-OABO

Condition: good (used), Year of construction: 2000, Connection value: 430kW Dimension: Isdpfx Asip T T Hjahoti Total length: 10750mm Width: 3400mm Height: 3900mm

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Iedpfxjxpi Dus Aahjti Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: good (used), Year of construction: 2009, In different assemblies, several parts. Interface Module Panel Manufacturer. SIEMENS S7 Typ: X1 Profibus-DP ET200S Isdpfx Aaegblhvohsti Panel consist of the following pieces: 1 - X1 Profibus-DP ET200S 1 - IM 151-1Standard 6ES7-151-1AA04-0AB0 1 - PM-E 6ES7 138-4CA01-0AA0 4 - 4DI 6ES7 131-4BD01-0AA0 3 - 4DO 6ES7 132-4BD01-0AA0 1 - 1SI 6ES7 138-4DF01-0AB0

Condition: good (used), Year of construction: 2020, PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc. Itodpfsxxvblex Aahsi

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Itodpfx Aaexhf Hishoi - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: AST2 190HE-MWT - 2200370969, cooling capacity: 539 kW (732.84 HP), type of input current: three-phase, type of cooling: water, overall weight: 5,098 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 92.1 m³/h, pump pressure: 3.4 bar, total width: 2,191 mm, total length: 5,445 mm, total height: 2,423 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit Type: Aries TECH AST2 190 HE-MWT – 539 kW Manufacturer: MTA S.p.A. The Aries TECH AST2 190 HE-MWT are compact air-cooled chiller units suitable for outdoor installation (from -20°C to +48°C), equipped with a shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crankcase heater, phase monitoring, P3 twin pump, 800-liter buffer tank, electric frost protection heater, EC fans, condenser filter, and control panel. Comes with a new condenser coil. Chilled water outlet temperatures adjustable from -10°C to +20°C. Cooling capacity (kW): 539 Chilled water temperature out / in (°C): 7 / 12 Flow rate (m³/h): 92.1 Available pump pressure (Bar): 3.4 Itedex E S S Nopfx Aahsi Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Number of capacity stages: 6 Electrical data: Voltage: 400 V, frequency: 50 Hz, phases: 3 Max. power consumption (kW): 261 Max. current (A): 431 Starting current per circuit (A): 636 Protection class: IP54 Dimensions: Length (mm): 5445, Width (mm): 2191, Height (mm): 2423 Weight (kg): 5098 (operating weight) Connection: DN 125 (Vitaulic) Serial no.: 2200370969 Year of manufacture: 2021 Condition: Cosmetic 2, Technically OK (Used machine) Price: on request in EUR (plus VAT, ex works Nettetal) – 3-month warranty Used machines may show visual imperfections due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: good (used), Year of construction: 2021, Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A -Output: 380-480V / 0-500 Hz / 173 A -Number: 2 frequency converters available -Price: per piece -Dimensions: 800/290/325 mm Isdpfx Aasxlzibshsti -Weight: 55 kg/piece

Condition: not inspected (used), Year of construction: 2023, functionality: unexamined, Description: For sale is a dismantled TRANE chiller unit, model CGAX 015 SE LN, manufactured in 2023, including a chilled water buffer tank KWP 2500 with a capacity of 2,500 liters, as well as visible accessories as shown in the pictures. The unit has already been dismantled and is available for collection by appointment. Suitable for industrial cooling, process cooling, building cooling, or technical refrigeration applications. Technical data for the TRANE chiller unit according to the nameplate: Manufacturer: TRANE Model / Type: CGAX 015 SE LN Serial number: EL G04 587 Year of manufacture: 2023 Refrigerant: R454B Voltage: 400 V / 50 Hz / 3 phases Max. current consumption: 36 A Starting current: 118 A ICC: 12 kA Weight: approx. 467 kg Itedpfx Ajzaqdfeahei Operating pressure HP: 41 bar Operating pressure LP: 31.1 bar Made in France Technical data for the chilled water buffer tank: Type: Chilled water buffer tank KWP 2500 Serial number / Year of manufacture: 712236 / 2023 Capacity: 2,500 liters Max. operating pressure: 10 bar Operating temperature: -10 to +50 °C Corrosion protection: unpainted inside, primed outside Not suitable for drinking water Made in Germany Scope of delivery as of now: TRANE CGAX 015 SE LN chiller unit Chilled water buffer tank 2,500 liters Pump technology / Wilo components Piping and fittings as shown in the pictures Base frame / installation structure as shown in the pictures Condition: Used, already dismantled. The unit was manufactured in 2023 and is in good optical condition. Inspection possible by appointment. Sale exclusively to commercial businesses. Subject to prior sale, errors and changes. All information without guarantee. Sale is made excluding any warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN Itsdpfxoyc Ewxs Aahsi - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a used WEEKE Venture 2M CNC machine from the HOMAG Group. Isdpszc Dvgjfx Aaheti Year of manufacture: 2008 Max. milling area according to the brochure: 3595 x 1400 mm Swivel table for multi-part machining Laser positioning for vacuum cups Drilling head with nut saw Torque arm for mounting machining heads (Sold without tools & machining head; these remain with the customer) Tool slots: 8 Windows XP / WoodWOP5.0 Still in production use. Available from July 2026 In good condition. Please feel free to contact us if you have any questions.