Punching crucible

Simplacutter

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication Gjdsz Dtb Djpfx Ap Dsbu – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Gedpjyx Uy Aefx Ap Djbu Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening Gjdpfsy Rumaox Ap Debu – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console Gsdpfxoy Rumme Ap Djbu – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Gbodpfx Asx R R R Uep Dju

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers Gedpfx Aoy Rumyep Debu - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Gbjdpfx Apey Rulvj Dou Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: used, Kombi-Falzmaschine / Combination Folding Machine  Heidelberg Stahlfolder KH 66/6-KTL  Gsdpfx Apswtw Aij Djbu Baujahr / Year 2012 - Serial-No. 0-00921 Flachstapelanleger / Flat Pile Feeder  >>Automatische Falzwalzeneinstellung / automatic Folding rollers adjust<< Format min. 140 x 180mm - max. 660 x 1040mm  Falztyp / Folding Type: 6 buckles - 1 knife - 1 side buckle - 1 knife  Geschwindigkeit / Speed 50.000 Cycles/hour  Auslage / Delivery SPH-70 - Year 2012 Compressor include - Manuals Included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, HIGH PERFORMANCE - BUILT FOR PROCESSING SINGLE, DOUBLE, AND HEAVY-DUTY BOARD! Main features: - 40+ pre-installed FEFCO styles, 100+ available box shapes - One-pass operation for seamless box production - Supports single, double-wall, and high-strength board - Works with sheets and concertina board - Integrated die-cutting system - Fast tool changeover - less than 20 seconds - Fully automatic servo drive setup - Large 19" touchscreen HMI with intuitive software - Slotting, creasing, cutting, gluing, and printing in a single operation - Detachable feeder (compatible with manual or vacuum feeding) - Remote diagnostics and updates via integrated VPN connection _____ Optional functions and upgrades: - Gluing system - synchronized cold glue application device Gbjdpfx Aewrrfcep Deu - miniFLEXO - compact single-color flexo printer - Flexomat - full-format flexo printer - Vacuum feed system - compensates for sheet curvature - 3D scanner - automatic product scanning and data entry - Automatic box folding system - Fully automatic production line _____ Technical data: - Power supply: 3 x 380/415/480 V - Installed power: 8.5 kW - Production efficiency: Up to 500 boxes per hour - Maximum box size: 2400 mm (94") width x 9999 mm (394") length - Minimum box size: 250 mm (10") width x 750 mm (30") - Slot width: ~7-8 mm (~5/16") - Machine footprint (L x W x H): ~3600 x 1900 x 1750 mm - Machine weight: ~3800 kg (7900 lbs) For further information, contact us, we are happy to help you

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Gedpjh Eii Tjfx Ap Dsbu Technical data and description: see pictures