Grinder for frozen block meat

Sind 300mm Grinder for frozen block meat

Condition: as good as new (ex-display), Year of construction: 2023, The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum reliability. Internal pump, tank, fan control, low GWP refrigerant R454B. Refrigerating capacity 37 Kw, envious GWP refrigerant R454B We have a lot of chillers directly from stock available used and new . contact us for a no obligation quote. Gtsdpfxefmd Hho Ah Het We rent / sell / and also take over the service for all refrigeration systems Germany-wide.

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Gedpfxedrc Txj Ah Hstt Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Gjdpfx Asvt R A Deh Hjtt Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability.

Condition: used, Year of construction: 2018, System: Decanter Gtsdpfou R Icmox Ah Hot Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Condition: new, Year of construction: 2025, You can smoke pices of meat, meat products(sausages, salami), fish, poultry pieces, cheese etc. Capacity: max 200kg Option of hanging with rods or trolley Easy to clean and operate It has three operating modes: dehydrating, cold smaking and thermal treatment Option of setting processing time and temperature Option od adjusting and saving programs. Dimensions: 1630x1220x2450 mm, Weight420kg, 400V, 9kW Material: Stainless steel 304 2 Jears warranty Godpfx Ajpuhtzoh Hjtt

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Gtedpjiyyndsfx Ah Hjt Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: ready for operation (used), Chamber depth: 750mm, sealing bar configuration 2x 650mm per chamber, built-in, electrical connection 3 x 400/415V 50Hz, 3 x 220V 60Hz, weight approx. 650kg (with 300m³/h vacuum pump), packaging speed approx. 2–3 cycles/minute. Length: 1600mm, width: 1055mm, height: 1045mm, weight: 650kg. An on-site inspection is possible. Gtedpew Nq Sbjfx Ah Het

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the Gsdpeuxmt Tjfx Ah Hett moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Year of construction: 2017, condition: like new (used), functionality: fully functional, SEALPAC A7 + SEALPAC AS-LS 1200 ID.NO. 2811 Gedpfoumbwbjx Ah Hjtt Sealpac A7 with Sealpac AS-LS 1200 Trough dispenser year mod 2017 absolutely new condition only driven 4792 troughs. Associated vacuum pump. Trough size 224 x 175 mm. Available for immediate delivery. Dimensions 920 x 90 cm Height 210 cm.

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl Gtjdpfelc Dwvsx Ah Het 12) Original technical documentation in German.