Drying tower

Skiptronics IS6153

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Ltedpoh Nrh Usfx Aanea Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ledpfx Aaotzc Iqenjta Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 932639 A690, Format trimmed 510x320 mm min 158x110 mm Format trimmed max 500x315 mm min 148x105 mm Power max 14000 c/h Ltedpfx Aobg Hnhoanja min 2000 mm

Condition: used, Year of construction: 2003, - Folding stations: 1st folding unit with 6 pockets (parallel fold) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel fold) - Max. sheet size: 520 x 840 mm - Min. sheet size: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on fold type and material) - Paper weight: 40 – 250 g/m² - Folding types: single fold, roll fold, zigzag fold, double parallel fold, and more - Feeder: flat pile feeder (PBA) - Control: electronic control with folding program memory - Delivery: shingle stream delivery (STA) - Optional: perforating, creasing or cutting units (depending on configuration) - Format adjustment: manual Ledpswv D Svefx Aanota - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Special features: - Robust construction with high precision - Suitable for small and medium print runs - Ideal for commercial printers and finishing companies 1 punching tool NE 515 SBP 46-2 vertical sheet delivery, year 1992

Condition: ready for operation (used), Year of construction: 2008, two side tables 3 spare knives total counter 1.7m top condition Lsdpfx Aextmhreaneta

Year of construction: 1993, condition: good (used), Built in: 1993 Lodsdycmdspfx Aanota Size: max 350 x 440 mm min 146 x 103 mm Size trimmed: max 310 x 420 mm min 140 x 100 mm Product thickness: max 70 mm min 3 mm Speed: max 6.600 c/h Equipment: • infeed belt • automatic infeed with integrated pre stacker • electronic counter • external knife changing device • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table size extensions • 1 set of quick change cassettes standard size • 3 sets of cutting sticks

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. Lsdpsh U A I Rofx Aanjta -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Ltodpoh T Dhqsfx Aanoa

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Installation in a hall Shelf height: 5.400 mm shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: Lsdpek Abbbsfx Aansta 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Ltedpfxedkp D Hj Aansa Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140