CNC Lathe

SMEC SL 2000 SY

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 235 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 2,085 mm, total width: 1,814 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 2,790 mm, number of slots in tool magazine: 12, number of axes: 6, This 6-axis SMEC SL2000SY was manufactured in 2022. It features a maximum turning diameter of 395 mm and a maximum machining length of 450 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and a tool turret capacity of 12 stations. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000SY horizontal turning machine we have for sale. Contact us for further details. - Control: Siemens SINUMERIK 828D with OPERATE + PPU290 (Touchscreen)- Swing over bed: 650 mm- Swing over cross slide: 540 mm- Max. turning diameter: 395 mm- Max. machining length: 450 mm- Y-axis travel: 105 mm (±52.5 mm)- Main Spindle Chuck Diameter: 210 mm (8")- Main Spindle Nose Norm: A2-6- Main Spindle Bearing Inner Diameter: 110 mm- Main Spindle Max. Bar Capacity: 67 mm- Main Spindle Bore Diameter: 76 mm- Main Spindle Drive Power: 18.5 / 11 kW- Main Spindle Max. Torque: 209.5 Nm- Sub-Spindle Chuck Diameter: 152 mm (6")- Sub-Spindle Nose Norm: A2-5- Sub-Spindle Bearing Inner Diameter: 90 mm- Sub-Spindle Max. Bar Capacity: 36 mm- Sub-Spindle Bore Diameter: 45 mm- Sub-Spindle Drive Power: 9 / 5.5 kW- Sub-Spindle Max. Torque: 51.9 Nm- Sub-Spindle Max. Speed: 6,000 rpm- Tool Turret Capacity: 12 stations (24-position indexing)- Tool Holder Type: BMT55- Driven Tool Drive Power: 5.5 / 3.7 kW- Driven Tool Max. Speed: 5,000 rpm- Driven Tool Max. Torque: 35 Nm- Stationary Tool Cross Section: 25 x 25 mm- Boring Bar Holder Cross Section: Ø40 mm- Station-to-Station Index Time: 0.2 sec- Rapid Feed X-axis: 18 m/min- Rapid Feed Z-axis: 30 m/min- Rapid Feed B-axis: 24 m/min- Rapid Feed Y-axis: 12 m/min- Slant Bed Angle: 30 degrees- Coolant System Tank Capacity: 10 bar pressure, 2.2 kW pump- Hydraulic Tank Capacity: approx. 14 L (35 bar max pressure)- Voltage / Electrical Connection: 400 V, 50 kVA- Pneumatic Connection: 6 bar- Net Weight Chip Conveyor: approx. 1,000 kg- Net Weight Transformer: approx. 300 kg- Additional Included Equipment: WTO Tool Holder Package, SAMCHULLY 3-jaw power chucks (8" main, 6" sub), Chip conveyor (side discharge), Oil skimmer with endless belt, Automatic tool setter arm, Part catcher & ejector, Bar feeder interface Technical Specification Counter Spindle Yes Driven Tools Yes Ibsdsz A T Uuopfx Aiysb

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Ibedpfxoydqpij Aiyob Machine has 12 position turret and a bar loader.

Condition: excellent (used), Year of construction: 2017, SMEC SL2000SY cnc turning center with subspindle Year: 2017 Technical details: Control: iemens 828D Shopturn Swing over bed: 650 mm Max turning diamater x lenght: 395 x 490 mm Max milling diameter: 310 mm Max spindle speed main spindle: 6000 rpm Max spindle speed sub spindle: 6000 rpm Spindle nose: A2-5 Spindle bore diamter: 61 mm Max bar diamaeter through spindle: 52 mm Main spindle and subspindle with C-axis Spindle Motor: 11/18.5 kW X travel: 235 mm Y travel: 105 (+/-52.5) mm Z travel : 580 mm ZB travel ( subspindle ): 580 mm Rapid traveres X,Y,Z,ZB: 24,10,30,24 m/min Number of tool stations: 12/24 ( BMT55 ) Driven tool stations: 12 positions Machine dimensions: 4125 x 1752 x 2100 mm Weight: 4150 kgs Accessories/options: Axial tool holders 4 pieces Radial tool holder 2 pieces Driven tool holders, axial, 2 pieces Driven tool holders, radial, 3 pieces Hydraulic chuck for main and subspindle Jaws set for chucks Parts catcher Swarf conveyor Coolant tank Documentations full set Iedjzyyx Dspfx Aiyobb Under power in our warehouse, possible to test it anytime!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Fanuc Series Max. turning diameter on the machine bed: 780 mm Max. turning diameter on the carriage: 630 mm Max. turning diameter: 406 mm Max. turning length: 520 mm Bar passage: 65 mm Spindle nose: ASA A2-6 Spindle bore: 52 mm Ibsdpfxsyiu Dnj Aiyeb Spindle speed: 5000 rpm Spindle motor power: 18.5 kW Tailstock bore: 45 mm Tailstock nose: ASA A2-5 Bellegrandi tool holders on the spindle and tailstock + 2 self-centering chucks X-axis travel: 260 mm Z-axis travel: 590 mm Y-axis travel: +102 - 51 mm B-axis travel: 590 mm Rapid traverse rate for X/Z/B axes: 30 m/min Rapid traverse rate for Y-axis: 10 m/min Turret type: BMT Number of turret stations: 12 Rotation speed of powered tools: 5000 rpm Dimensions: 3530x1863 mm, H=2163 mm Weight: 5900 kg No. 10 tool holders for powered tools.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,929 h, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details. • Tool magazine: 60-station, HSK-A63 • Rotary table: KESSLER rotary table, Ø 500 mm • Spindle air blast: Air through the spindle • Internal coolant supply: 20 bar, with belt filter unit • Coolant system: Automatic coolant level monitoring • Media supply: 3-channel media supply at table center • Handwheel: Mobile electronic handwheel • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe); workpiece measuring preparation included • Viewing: Rotation viewing window included • Collision monitoring: POS DCM collision monitoring module • Condition: Top condition • Hours: 6,929 • Accessories note: Without tool holders and without quick clamping system Iodpfx Aisyir Dxeysbb Additional equipment • Oil mist separator: Electromechanical • Hydraulic unit: Hydraulic aggregate, M-function controlled Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) Ibedpfx Aijxaa Ureysb - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, Ibjdpfx Ajzh Nczsiyjb 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Iodpfx Aoyz S Ngoiyobb Bending length: 4050 mm Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller model: HEIDENHAIN TNC 530, workpiece weight (max.): 4,000 kg, overall weight: 35,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40 (DIN 69871), number of slots in tool magazine: 60, CNC Machining centre DECKEL MAHO DMU 160 P TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: HEIDENHAIN TNC 530 Number of simultaneous axes: 5 Stroke X axis: 1600 [mm] Stroke Y axis: 1250 [mm] Stroke Z axis: 1000 [mm] Feed rate on X, Y and Z axes: 15000 [mm/min] Traversing feeds X, Y and Z axes: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Max. load on table: 4000 [Kg] Spindle type: SK 40 (DIN 69871) Min. spindle speed: 20 [rpm] Max. spindle speed 12000: [rpm] Tool changer magazin number of stations: 60 Machine weight: 35000 [Kg] Ibodozggmbopfx Aiyeb INCLUDED EQUIPMENT: 1 × HEIDENHAIN part probe 1 × laser measuring system for tool setting and tool monitoring 3 × HEIDENHAIN linear glas scales on the X, Y and Z axes 1 × through-spindle coolant system 1 × chip conveyor 1 × paper-band filtration unit (paper filter system) More information upon request.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, Equipment: chip conveyor, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions, as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in the medical technology, mechanical engineering, and precision engineering industries. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control. This enables both dialog-oriented and ISO programming and offers modern functions for efficient and productive manufacturing. Key technical data: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis has a swivel range of 225°, enabling complex 5-axis machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. The main spindle reaches speeds of up to 6,000 rpm with a power of approximately 11 kW, which enables dynamic and precise turning operations. The integrated milling spindle operates with speeds of up to 12,000 rpm with a power of approximately 5.5 kW and is ideally suited for milling, drilling, and threading operations. The machine features a tool changer (available) with a maximum tool length of 210 mm and a KM tool holder, which ensures high rigidity and fast tool changes. Equipment: The equipment includes: • Chip conveyor • Tool measurement system "Tool Eye" With a machine weight of approximately 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. Iedpfx Ajzpyvhjiyebb You are in the best hands with us – professional, reliable, and with a passion for machines! Necoyir I Rs Eanhd Held PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.