Dangerous goods

Sonstige/Other Tankwagen

Condition: used, Technical details: number of controlled axis: 6 workpiece weight: 20 t operating time: 4290 h control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Nsdpsu Nwfbsfx Afascn Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. *

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ncjdpfx Ael Hbcfofaon Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: good (used), mileage: 11,625 km, fuel type: gasoline, color: green, driver cabin: day cab, Year of construction: 1957, Field of application: Freight transport Steering wheel placement: Left Empty weight: 3.740 kg Technical condition: good Visual appearance: good Production country: NL Please contact Vink Machinery for more information DAF YA126 Wounded transport Nodpstpm Hysfx Afajcn * 1957 * Petrol * 11625 kilometers * Equipped with a heater in the front and back * provided with attributes * 3740 kg own weight * Including registration certificate of the truck * No license plate papers of the trailer * MARGIN!

Condition: used, New: Yes Please contact us for more information. Ncjdpfx Ajx I Elnefasn

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Nodpfxew Adkfs Afaecn Complete with control cabinet, fences and hydraulic unit, valves etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery.

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, Ncjdpfeh Et E Nsx Afasn unit was well maintained Rest see pictures

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Nsdpspugwisfx Afaocn Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Ncjdpouzvyujfx Afasn Name, e-mail address and telephone number.

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm Ncodpfx Ajpgmufefajn belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: new, The KNWP 15 M is a reliable manual hydraulic workshop press designed for versatile applications within the Workshop Presses category and specifically under Manual Workshop Presses group. Engineered in Europe, this robust machine is ideal for general assembly, straightening tasks, and workpiece testing, ensuring professional usability in mechanical workshops, garages, and locksmiths. The KNWP 15 M supports a pressure force of 15 tons and features a total piston stroke of 160 mm, enabling efficient removal and installation of press-fit bearings, as well as straightening beams and shafts. Equipped with both hand and foot control, this press includes a rigid machine frame and an adjustable-height support table, making it easy to handle. You will appreciate the versatility of its multi-function die for straightening various materials. For your needs in power and precision, you can easily order online or request a quote. Experience the quality and utility that the KNWP 15 M offers today in the Workshop Presses category and Manual Workshop Press group. Njdpsncdu Nsfx Afaecn