Printing Machine

CEFLA PIXART 16/4/UV

Condition: good (used), Emco Compact 10 Lathe Hnodpfx Aox Ncucedwog Made in Austria. The machine is in perfect condition, practically unused. The machine comes from a maintenance workshop at a printing house. It has not been used in production. Accessories are included.

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Hnedpfx Asn Arm Todwsg Pixel pitch 8nm Optical resolution 11nm Scattered light

Condition: excellent (used), Year of construction: 2019, Roland SolJet PRO 4 XR-640 Eco-solvent and cut-to-length printer - 1,63 cm wide CISS ink system - ink is about 40% cheaper. The equipment is very little used, is in production and can be viewed / tested. Printing speed up to 49,1m2/hour. It has been designed for high production yet combines all of Roland's unique and innovative applications plus some new ones. Among its main features are quality and speed as well as the ability to achieve metallic shades, printing on transparent materials and a significant colour tone enhancement, making it the world's first utility to use Light Black outdoor ink. The Roland SolJet Pro XR-640 provides quality prints with EcoSol Max2 inks, strong colours with high durability. The ink has a very low odour. Hnedpsmcw Twjfx Adwog Best quality for indoor and outdoor at the most common width. Very high productivity with low maintenance. Maximum material width:1.625 mm; - Maximum print resolution: 1440 dpi; - Variable Droplet with 7 different droplet sizes; - A new generation of EcoSol Max 2, Nickel-free, eco-friendly inks; - Banding-free printing even at high speeds; - Evolved roll feed system; - Take up roll rewind system (works for printing and cutting); - Automatic maintenance & head cleaning system; - Built-in Heater/Dryer; - VersaWorks RIP Roland; - Variable data printing; - Print time and cost calculation; - New Light Black colour; White and silver ink; - Metallic Colours; Printing & Cutting; - Four different colour compositions; EXW old price 9900 euro - new price 7900 (without VAT in EU)

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. * Technical data will follow shortly * For self-dismantling and collection. Hsdpfx Adslf H Tcjwsng

Condition: refurbished (used), Year of construction: 2010, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Hnodpfx Ajq Dpxdjdwog Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection

Condition: excellent (used), PF 706 in perfect condition , tested and ready to work Compatible with : Konica Minolta bizhub PRO 951 Konica Minolta bizhub PRESS 1250 Konica Minolta bizhub PRESS 1052 Konica Minolta bizhub PRESS 1250P Develop Ineo 1250 Develop ineo 1052 Develop ineo 951 Konica Minolta bizhub PRESS 2250P As an experienced retailer of used copiers, we have developed a real expertise in packing and pallet/ container shipping, to guarantee our customers machines in perfect condition upon receipt. Our company offers the largest range of production copiers, and handle world-wide deliveries on request. Hnjdpfx Asiwxkyjdwjg Please do not hesitate to contact us for further information.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Hnodpfxsflk Awo Adweg 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Year of construction: 2014, XEIKON 3050 including front end system Year of Manufacture: 2014 _____ Product Description:  Bar code modules  Xeikon PMS-Large  Rewinder XRN 500 single shaft, incl. Tension control  Maintained: Gold maintenance contract  Operating hours: very low estimated max. 300h  Condition: As good as new Machine Specifications and Equipment:  Print Process: Electrophotographic with LED array, dry toner, rotary printing with variable print length  Color Configuration: 5/0 simplex (CMYK and White) Hnjdpfx Asv Iqimedwsg  Color Control: Integrated densitometer  Toner: Xeikon QA-I  Resolution: 1200 x 3600 dpi with 4-bit LED spot  Print Width: 508 mm (20.0 inches)  Print Length: Variable, 0-55 m (0-180 ft)  Substrate Feeding: Roll-fed; suitable for paper, paperboard, self-adhesive or pressure-sensitive labels (paper, PP, PET, vinyl, co-extruded film), transfer substrates  Substrate Width: 250-516 mm (9.8-20.3 inches)  Substrate Weight: 40 to 350 gsm (27 lb text to 122 lb cover)  Substrate Thickness: 40 to 550 μm (1.6 mil to 21.65 mil)  Web Alignment: Active, based on infrared and ultrasonic sensors  Print Speed: 9.6 m/min (31.5 ft/min) _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Hnjdpfx Adjhw Ng Iowjg Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Hnsdeg A Hcujpfx Adwsg