Steel cable for cable hoist 1.6 ton

Stahl Ø 11 mm 20 m

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm Giedpsxbyaqefx Anxst -Length: 20 m -Transport dimensions: 360/90/H400 mm -Weight: 12.4 kg

Condition: used, Gearbox, bevel gear, worm gear Gijdpfst Snwxex Anxst -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) Gedpfxovc Awxe Anxsit *

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic Giodsupxupopfx Anxst • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: good (used), Tires, tractor tires, soil cultivation, seed drill Giodpfeb A Rtrex Anxst -Quantity: 2 tires -Tire size: 180/90-16 IMP -Dimensions: Ø 700 mm -Total price: for 2 tires -Weight: 40 kg/piece

Condition: good (used), Robland planer thicknesser Giodpfx Anjvyhmgsxet 3 Tersa knives 1 thicknesser feed speed thicknesser processing height 230mm soundproofing combs in the table table length 140cm the machine is efficient and ready to work

Condition: excellent (used), Year of construction: 2000, EMCO VMC 600, Siemens Year of manufacture: 2000 Gijdpfx Aoxxakwsnxot

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Gefran, power controller power regulator Gedpoubfyhefx Anxeit -Type: GTF-25-480 -Number: 5x power controllers available -Price: per piece -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/pc.

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Giodpfxjvwfqwj Anxst

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Gedpsxmiqiefx Anxjit