Combination of planer and thicknesser

Robland NXSD 310

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 Rcsdpfxsx U U Eko Aireh The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Rsdpfx Aofz U S Eeirech Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Rodpfsittnzox Airsch Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: excellent (used), Year of construction: 2010, 4 kW motor Rjdpfx Asul Utmjirsch 4 blades Table length: 198 cm Table width: 41 cm

Condition: new, Year of construction: 2026, CORMAK PT310ECO Thickness and Surface Planer with Spiral Cutter Block – Precision and Work Efficiency The CORMAK PT310ECO is a modern planer-thicknesser engineered for high finish quality, reliability, and low noise levels. Thanks to its spiral cutter block with 30 replaceable carbide inserts, the machine delivers exceptionally smooth surfaces with significantly reduced vibration and noise. Its stable construction and powerful motor make it a versatile solution for professional woodworking—both in carpentry shops and in artisan workshops. Key Advantages Spiral cutter block – 30 inserts (310 × 25 × 3 mm) provide long tool life, precise planing, and reduced noise levels. Massive cast iron work tables – absorb vibrations and ensure stable material feed. High power output – 2.2 kW motor (S1) / 2.6 kW (S6) ensures consistent performance during demanding operations. Large working area – 310 mm planing width and 180 mm height capacity for various workpieces. Effective chip extraction – Ø100 mm extraction port allows easy connection to dust collection systems. Construction and Technology The PT310ECO is equipped with a spiral cutter block of 75 mm diameter, ensuring smooth operation and significantly longer durability than traditional knives. Each insert can be rotated four times, greatly reducing maintenance and operating costs. The planer-thicknesser features wear-resistant cast iron tables: 1290 × 310 mm (planer) and 540 × 310 mm (thicknesser). The adjustable fence angle between 90° and 45° allows for accurate guiding of materials even at an angle. Precision and Performance Maximum cutting depth: Planing mode: 3 mm Thicknessing mode: 4 mm Cutter block rotation speed: 5,500 rpm The machine’s rigid frame enables surfaces that are ready for gluing, lacquering, or further processing. A reliable thickness planer for both mass production and small batch work. Applications The PT310ECO is the ideal solution for: Professional carpentry and furniture workshops Prototyping labs and training centers Industrial maintenance departments Technical schools and trade colleges Standard Equipment Spiral cutter block with 30 inserts Cast iron work tables Cutter head guard Ø100 mm dust extraction outlet Feed switch and emergency stop switch Optional Equipment Mobile base Dust extractor Rcjdpfx Aiow Ab Afsrsh Technical Specifications Specification Value Planer table dimensions 1290 × 310 mm Thicknessing table dimensions 540 × 310 mm Spiral cutter block diameter 75 mm Cutter block speed 5,500 rpm Cutting inserts 310 × 25 × 2.5 mm Fence tilt angle 90°–45° Chip extraction outlet Ø100 mm Maximum thicknessing height 180 mm Max. cutting depth 3 mm (planing) / 4 mm (thicknessing) Motor power (S1 / S6) 2.2 kW / 2.6 kW Maximum workpiece width 310 mm Weight (gross) 200 kg

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm Rjdpsulg Szofx Airoch With a cutter

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Rcsdpfx Ajupxupeirsh Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Year of construction: 1970, turning diameter over bed 840 mm turning diameter over slide rest 640 mm turning length 3300 mm spindle bore 74 mm turning speeds 7,1-1400 U/min 3-jaw chuck 315 mm turning dia. in gap 920 mm length of gap 370 mm total power requirement 22 kW Rcjdsyqvwrepfx Airoh weight of the machine ca. 10 t dimensions of the machine ca. 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, For sawing, milling, planing/thicknessing, and optionally mortising in a confined space. High-precision format sliding table made of anodized aluminum, available in various lengths. Large outrigger (1200 x 650 mm) with a material support roller and extendable aluminum telescope fence up to a maximum of 3200 mm with professional fence flaps. Max. saw blade diameter 315 mm, swiveling from 90° to -45°. Large swivel range of the milling spindle from 90° to -45° to the rear. Four milling speeds up to 10,000 min⁻¹, manually adjustable. With clockwise/counterclockwise rotation of the milling spindle. Heavily ribbed planing tables made of stress-free gray cast iron for decades of stability and flatness. 2-stage feed rate for thicknessing. Three independent industrial motors for continuous operation. With lockable main switch, motor protection switch. Fixed handwheels. Dimensions and Weights Weight (net) approx. 857 kg Planing Planing table width 410 mm Planing table length 2000 mm Maximum planing material removal 5 mm Dust extraction connection Dust extraction port diameter 3 x 120 mm Dust extraction port diameter saw blade guard 60 mm Installation Information Space requirement length 5960 mm Space requirement width/depth 5140 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area length 1600 mm Working area width/depth 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thicknessing table length 757 mm Thicknessing table width 423 mm Minimum working height (thicknessing) 3 mm Maximum working height (thicknessing) 230 mm Maximum material removal (thicknessing) 5 mm Electrical data Connection voltage 400V Mains frequency 50Hz Rcodpfxjih Dxlj Airoh Rated operating mode drive motor S6 Duty cycle drive motor 40% Power drive motor 3 x 5.0 kW Sliding table and table Format sliding table length 2660 mm Format sliding table width 360 mm Format sliding table height 142 mm Table length 1250 mm Table width 430 mm Table height 900 mm Milling spindle Spindle inclination 0 – -45° Spindle arbor diameter 30 mm Usable length of the spindle 125 mm Spindle speed(s) 3500/6000/8000/10000 min⁻¹ Maximum milling tool diameter Maximum tool diameter, adjustable 210 mm Maximum tool diameter, adjustable 45° 150 mm Maximum tool diameter, mortising 275 mm Planing cutterhead Cutterhead type TERSA Cutterhead diameter 87 mm Number of planing knives 4 pcs Cutterhead speed 5200 min⁻¹ Circular saw unit Beside length 2600 mm Cutting width with parallel fence 900 mm Maximum crosscut width to the left of the saw blade 3260 mm Saw blade inclination 90 – 45° Maximum cutting height at 90° 90 mm Maximum cutting height at 45° 63 mm Maximum saw blade protrusion 90° 100 mm Maximum saw blade protrusion 45° 71 mm Diameter (main) saw blade 315 mm Explanation of diameter (main) saw blade: with scoring saw Speed (main) saw blade 4000 min⁻¹ Feed rate Feed rate 6 – 12 m/min Location: In stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table milling machine TF900 - Year of manufacture: 1993 Rcedpfjygm D Uox Aireh - 380 Volt - 3 speed settings - good condition Transport possible at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.