Pillow block housing

Stahlgehäuse Innendurchmesser 320 mm

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure Hjdpfx Asg Ezarekyjn -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 116387, planing height: 160 mm, planing width: 260 mm, total width: 145 mm, total height: 170 mm, total length: 375 mm, workpiece weight (max.): 2,100 kg, workpiece height (max.): 160 mm, compressed air connection: 8 bar, type of input current: three-phase, workpiece width (max.): 260 mm, input voltage: 400 V, table length: 2,500 mm, number of spindles: 4, extraction connection diameter: 250 mm, power: 18 kW (24.47 HP), input frequency: 50 Hz, input current: 63 A, Equipment: motor brake, Weinig Cube 4-sided planing machine for sale. Offered for sale due to very little use in our workshop. Originally supplied and always serviced by De Groot Bewerkingmachines. Machine operates perfectly. Currently disconnected and packed, but can be demonstrated in operation upon serious interest. Year of manufacture: 2011 Weight: 2,100 kg Connection value: 400V 63Ah Hsdpfx Aoxhcizekysn Air pressure: 8 bar Power: 18 kW (25 hp) Extraction connection: 250 mm 1x Max. planing width: 260 mm Max. planing height: 160 mm Minimum planing length: approx. 400 mm Infeed table length: 2,500 mm All values adjustable via touchscreen display Visible removal indication by laser lines Total machine length: 375 cm Total machine width: 145 cm Total machine height: 170 cm Incl. planing heads with knives. This is a good quality machine.

Year of construction: 2019, condition: new, Brand NXZ Model: 6316, 6318, 6319, 6320, 6326, 6328, 30224, 30315, 30316, 30324, 30328, 30330, 32221, 32315, 32316, 32317 Year of construction: Unused Weight (kg) approx 11360 Made in China Hjdpfoqa An Uox Akyon Comments Single packed or wrapped, packed in cartons by multiple pieces Selling condition Selling as full quantity only

Condition: new, Generally overhauled machine Price: 6.000EUR Hedpfx Akox N Edteyon Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120 kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE

Condition: used, Rolling bearings, ball bearings, SKF bearings, SKF, spherical bearings, roller bearings -Type: 24056 CC/ W33 -Lubricating groove -Bore: Ø 280 mm -Outer diameter: 420 mm -Width: 140 mm Hodod Nw H Aepfx Akyon -Weight: 74 kg

Condition: new, Year of construction: 2024, We supply any wear and spare parts for cone crushers Sandvik, Allis Chalmers, Metso. Nordberg, Symons. Mantle, concave, bushes, gear and Piston. EUR1 possible ! Hjdedry Axspfx Akyon

Year of construction: 2002, condition: used, functionality: fully functional, Electric overbelt magnet with a 1400 mm wide band, the main dimensions are approximately 3500x2000x900 mm (lxwxh) Hodpfxeiyx Eyj Akyon

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Machine is without gearbox. Hsdpfx Asyt Iawekysn

Condition: used, Year of construction: 2010, functionality: fully functional, Two used briquetting presses from Pawert SPM / 3 briquetting presses from DI PIÙ The Pawert presses include, according to the following specifications: - 2 steel sheet silos, each with approx. 20 m³ usable volume, including silo discharge system - 1 briquetting press, make SPM PAWERT AG, type 84/1 - 90/200, machine no.: 1060, power 55 kW Hsdpfjyiyhfex Akyjn - 1 briquetting press, make SPM PAWERT AG, type 96/1 - 90/200 SBP, machine no.: 1140 - Complete conveyor system including 2 cooling lines, conveyor belts, roller conveyors, etc. - 2 cross-cut stations - 1 noise protection cabin for cross-cut saws - 1 feeder, make KÖRA, model Packmat, likely type EF-235 - 1 shrink wrapper, make KALLFASS, type Super Wrap 650 - De Luxe - inline, machine no.: VD 03.08.445, year 2000, incl. shrink tunnel - Accessories: control and power cabinets, PC controls, frequency converters - Spare parts according to appendix 1 Plant boundaries: - Material infeed: flange of chip conveyor in chip container before the presses - Power supply: input terminals in Pawert control cabinet _____ Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Pressing force: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total installed power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press — Equipment: Material hopper Feed screws Hydraulic system Control cabinets Saws for briquette length cutting Protective cladding & safety systems Discharge units — Scope of delivery: 3 complete briquetting presses Di Più MB100 Saws Conveying technology & accessories Spare parts by agreement — Areas of application: Sawmills Wood processing Biomass operations Briquette production for energy & sales Location: 3383 Inning Transport: can be organized by arrangement Price: on request Available for individual sale or as a complete package

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers - Manufacturer: Passimo OY - Screen area: 15 m2 Hodpstmtf Rjfx Akyjn - After renovation.