Automatic lathe

STAR Micronics SH-12

Condition: ready for operation (used), functionality: fully functional, STAR SH-12 Control: Fanuc 21-T Device for unloading long parts Dwjdpfxjxwugdj Aptsb Complete with IEMCA MINI BOSS 325 bar feeder

Condition: ready for operation (used), A Mori Seiki CNC lathe is available. Swing diameter over bed/slide: 450mm/300mm, max. turning diameter: 160mm, turning length: 525mm, travel X/Z: 135mm/560mm, bar capacity: 42mm, spindle bore: 52mm, spindle nose: JIS A2-5, spindle speed: 5000rpm, power: 7.5kW, torque: 172Nm, tool stations: 12, tailstock taper: MK4, quill diameter: 75mm, quill stroke: 80mm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/1700mm, weight: approx. 3250kg, control: Fanuc Series 15-T. Documentation available. An on-site inspection is possible. Dedpfxozipf So Aptowb

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Machine manuals Country of origin: Japan Dedpoyw Inqsfx Aptjwb Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dwsdpfx Aolz Rvloptjb

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug) Djdpfefbt Sijx Aptewb

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Dwsdpfx Apsyz Stlstjb Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine Djdpfei Eg Nkex Aptewb -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: new, type of input current: DC, total width: 370 mm, total length: 180 mm, total height: 190 mm, input voltage: 230 V, rotational speed (max.): 5,300 rpm, overall weight: 10 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.18 kW (0.24 HP), grinding diameter: 13 mm, Sharpening of drills with a diameter of 2 mm to 13 mm Adjustable angle: 90 and 135 degrees Dsdpfxega T D Ts Aptswb Grinding speed: 5300 rpm Grinding wheel: CBN 200 Motor: 230V/1Ph/180W Weight: 10 kg

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Dwedpfx Apszdknwjteb

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 510 mm, turning length: 752 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, feed rate X-axis: 18,000 m/min, feed rate Z-axis: 24,000 m/min, CNC Lathe MORI SEIKI ZL-2035MC – Technical Data Sheet The MORI SEIKI ZL-2035MC is a high-precision CNC lathe, ideal for advanced multi-axis turning operations, featuring dual spindles and live tool turrets. Manufactured in December 2002, it is engineered to deliver productivity and accuracy in complex machining processes. General Specifications Brand: MORI SEIKI Model: ZL-2035MC Category: CNC Lathe Year of construction: 12/2002 CNC Control: MORI SEIKI MSG-501 Machine weight: 5,900 kg Machine Dimensions: Length: 4,350 mm Width: 2,400 mm Height: 2,200 mm Machining Capacities Max swing over bed: Ø 680 mm Max swing over carriage: Ø 510 mm Distance between centers: 752 mm Dwjdjxd Td Uspfx Aptsb Max turning diameter: Spindle No. 1: Ø 390 mm Spindle No. 2: Ø 294 mm Max turning length: 520 mm Bar capacity: Ø 65 mm (Ø 51 mm on No. 2) Axis Travels X Axis: No. 1: 235 mm No. 2: 175 mm Z Axis: No. 1: 520 mm No. 2: 490 mm B Axis: 505 mm Main Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-6 Chuck diameter: Ø 210 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 11 / 7.5 kW Sub-Spindle Speed: 40 – 4,000 rpm Spindle nose: JIS A2-5 Chuck diameter: Ø 160 mm Minimum programmable C axis angle: 0.001° Spindle motor power (continuous/30 min): 7.5 / 5.5 kW Tool Turrets Turret No. 1 Number of stations: 12 Driven stations: Yes Driven tool speed: 4,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Turret No. 2 Number of stations: 8 Driven stations: Yes Driven tool speed: 3,000 rpm Turning/boring tool dimensions: 25x25 mm / Ø 32 mm Rapid Feeds X axis rapid traverse: 18,000 mm/min Z axis rapid traverse: 24,000 mm/min B axis rapid traverse: 24,000 mm/min Manual feed for X / Z / B axes: 0 – 1,260 mm/min Included Accessories 5 live tool holders and various fixed toolholders Chip conveyor Transformer Part unloading arm Coolant tank with pumps Manuals, electrical diagrams, and CE Declaration