Electric 3-wheel forklift with triplex mast

STILL R50-15

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 2,800 h, load capacity: 1,500 kg, lifting height: 3,200 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Bodpfx Abozuhhcotsll Mast type: Quattro Technical condition: good Front tire type: Superelastic Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery type: PzS Side shifter, 3rd valve, rear work light, front work light.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump Bedpfewra S Rjx Abtsll and the existing coarse and fine fittings.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 7,545 h, load capacity: 1,500 kg, lifting height: 5,350 mm, free lift: 1,810 mm, fuel type: electric, mast type: triplex, construction height: 2,285 mm, fork carriage width: 890 mm, fork length: 1,100 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Non-marking Front tire size: 18x7-8 Rear tire type: Non-marking Rear tire size: 18x7-8 Battery voltage: 24V Battery capacity: 920Ah Battery manufacturer: HSR Bledozkngwepfx Abtol Battery type: PzS Battery year of manufacture: 2002 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not buy a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will be happy to provide you with competent and detailed advice on our vehicles. Work light front, roof cover, windshield, full free lift, non-marking tires, interior mirror, windshield wiper, single-pedal operation, LED, 3-wheel, seat.

Condition: used, load capacity: 1,500 kg, Manufacturer: STILL GmbH Model: R50-15 Drive type: Electric (battery) Load capacity: 1,500 kg Load center: 500 mm Design: Counterbalance forklift, front loader Tyres: Solid rubber or superelastic (industrial) Drive motor: Electric motor Bledpfxoy I A Ake Abtsl Lift motor: Electric motor Battery voltage: 80 V Own weight: 2,605 kg Operating hours: 51,219 h

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Bledpjzt Idujfx Abtel Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 829 h, load capacity: 1,500 kg, lifting height: 3,000 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 1,990 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 18x7-8 Blodpfxey Hypfo Abtel Rear tire type: Superelastic Rear tire size: 18x7-8 Battery voltage: 24V Battery capacity: 840Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2013 Description: In addition to this machine, we offer a range of forklifts and warehouse equipment. All our machines are workshop inspected and certified according to FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Leasing & financing options are available upon request at competitive terms. We are happy to provide you with expert and comprehensive advice about our vehicles. Sideshift, 3rd valve, front work lights, full free lift, single pedal, 3-wheel, seat,

Condition: used, functionality: fully functional, load capacity: 1,500 kg, remaining battery capacity: 100 %, Equipment: CE marking, SECOND-HAND ELECTRIC FORK TRUCK STILL MOD. R50/13 - 3 WHEELS CE RULES Bledsx Rbqrspfx Abtjl - Capacity 1500 kg. - Translator - Lift mm. 3500 - Battery 1800hours - Complete with new battery V24 and battery charger

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. Bsdpfx Ajtyyvwobtell very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 070068681, Hz: 50/60 V250/300 m3/h Bljdpfeyqyb Ijx Abtel P 100 hPa (0.1 bar)

Condition: excellent (used), We are offering a Busch WV 2000 C, NC 0300 B vacuum pump set. Bsdpev Uw Snefx Abtoll The pumps were rarely used and came from a solar factory. We have two sets.