Forklift

Still RX20-16P

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Nedpfx Adjw U E Uujwecl Load centre: 500 Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: normal Front tyre type: Non Marking Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Sideshift, 3rd valve, rear work light, front work light,

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutting machine. Model C780-M8. This paper cutting machine comes from a government agency and has seen very little use. Complete with all standard accessories and chrome table. This machine is 100% operational. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Please request a price including transport (location: the Netherlands). Regards, Henk Hoos. Nsdpow E I Eljfx Adwscl

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,927 h, load capacity: 1,600 kg, lifting height: 3,500 mm, fuel type: electric, mast type: telescopic, construction height: 2,240 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tyre type: Superelastic Front tyre size: 18x7-8 Rear tyre type: Superelastic Rear tyre size: 16x6-8 Battery voltage: 48V Battery capacity: 625 Ah Battery manufacturer: GNB Battery type: PzS Battery year: 2019 Description: In addition to this unit, we offer further forklifts and warehouse equipment. All our units are workshop-tested and conform to FEM 4.004 standards. Please contact us via email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not buy a vehicle from us. Hire purchase and financing at attractive terms available on request. We will be happy to provide you with competent and comprehensive advice regarding our vehicles. Sideshift 3rd valve Ncodpfjyb Ur Nox Adwol Rear working lights Front working lights Heater Full cabin Interior mirror Joystick Windscreen wiper Single-pedal LED Seat

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,347 h, load capacity: 1,600 kg, lifting height: 4,920 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Ncjdexf Rgpepfx Adwol Mast type: Triplex Transmission: Automatic Condition: Refurbished, without warranty Technical condition: Very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Description: Price includes new UVV inspection, new paintwork, battery will be reconditioned with a power cycler including Kappa test, matching charger with plug included. We are happy to organize economical transport for you. Leasing with option to purchase is possible! Sideshift, fork positioner, third valve, fourth valve, rear work lights, front work lights, roof cover, full cab, CE certificate.

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 will be sold on behalf of our customer, ex location ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. Ncsdpfx Adsw I Eawewol - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip e...

Condition: used, functionality: unexamined, Year of construction: 2017, fuel type: electric, ID No. G00578 Forklift Still RX20 -16P Year of manufacture: 2017 Overall height approx.: 2.08 m Overall height with protective roof approx.: 2.15 m Lifting height: 3175 mm Free lift Ncedpfxex Trypo Adwel Side shifter Fork positioner Including charger

Condition: good (used), Year of construction: 2018, operating hours: 4,587 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, empty load weight: 3,500 kg, mileage: 4,587 km, EXPECTED This TRIPLEX forklift from the brand STILL is from 2020 and is in good condition. The forklift has a capacity of 1,600 kg and lifts up to a height of 4,620 mm. Clearance height is 2,060 mm; CONTAINER forklift! Equipped with SIDESHIFT and FREELIFT. 4,587 operating hours. The 2018 battery comes with an external charger and an automatic filling system. Schedule an appointment for a test drive; video to follow. FINANCIAL LEASE POSSIBLE, ASK FOR TERMS. Calculation is subject to credit approval and changes in interest rates and fees; final calculation via our external partner. Nsdpfxox Ag Rxj Adwjcl

Condition: used, machine/vehicle number: FN396134, Year of construction: 2009, lifting height: 4,990 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.500 kg Maximum passing height: 210 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.2x2.09 Ncedpfx Ajvmwntsdwol Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2010, operating hours: 7,255 h, load capacity: 1,600 kg, lifting height: 3,350 mm, fuel type: electric, mast type: duplex, construction height: 2,200 mm, Year of construction: 2010 Ncjdpjx Hr N Rjfx Adwel Field of application: Internal logistics

Condition: used, Year of construction: 2018, operating hours: 4,002 h, load capacity: 1,600 kg, fuel type: electric, construction height: 2,050 mm, gearing type: other, overall weight: 3,067 kg, empty load weight: 2,169 kg, total length: 3,350 mm, color: orange, mileage: 4,002 km, first registration: 12/2018, suspension: other, driver cabin: other, emission class: none, fuel: electricity, The Still RX 20-16P is a used 4-wheel electric front loader that is characterized by its reliable performance in industrial use. The vehicle was first registered on December 3rd, 2018 and has an operating time of 4,002 hours. Powered by an electric drive, it offers an environmentally friendly and quiet solution for internal transport. The compact design with a length of 3,350 mm, a width of 1,050 mm and a height of 2,050 mm makes it ideal for use even in confined spaces. The forklift has a striking orange paint finish and has a permissible total weight of 3,067 kg. Ncedpeuhh Syefx Adwsl Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Ncodpfx Aswztr Nedwel Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: used, Year of construction: 2018, operating hours: 9,667 h, load capacity: 1,600 kg, fuel type: electric, construction height: 2,050 mm, gearing type: other, overall weight: 3,067 kg, empty load weight: 2,169 kg, total length: 3,350 mm, color: orange, mileage: 9,667 km, first registration: 12/2018, suspension: other, driver cabin: other, emission class: none, fuel: electricity, This used Still RX 20-16P 4-wheel electric front loader is a reliable and efficient work tool for your company. First registered on December 5, 2018, this forklift has a mileage of 9,667 km and 9,667 operating hours. It is painted in a striking orange and is electrically powered, which ensures environmentally friendly and quiet operating conditions. Ncedpfx Asuz Ew Nodwjl With a height of 2,050 mm, a width of 1,050 mm and a length of 3,350 mm, the forklift offers a compact design that is ideal for tight work areas. The permissible total weight is 3,067 kg, which makes it suitable for various loading activities in agriculture, for freelancers or in the commercial sector. Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.