Cylindrical grinding machine

Studer S20

Condition: reconditioned (used), functionality: fully functional, center height: 100 mm, workpiece weight (max.): 20 kg, grinding length: 400 mm, grinding wheel diameter: 350 mm, distance between centers: 400 mm, year of last overhaul: 2026, CHARACTERISTICS : Centre distance: 400 mm Center height: 100 mm Working feed Z axis: 100 - 3500 mm/min Orientation of table: 0 - 30 ° Grinding spindle motor power: 3 kW Max. diameter grinding wheel: 350 mm Max. grinding wheel width: 30 mm Grinding wheel bore: 127 mm Workpiece spindle nose: W20 Workpiece spindle min. speed: 30 rpm Rbsdpfxjycim Ds Adbjt Workpiece spindle max. speed: 1200 rpm Max part weight between centres: 20 Kg Workpiece swiveling range: 0 ° / +90 ° Workpiece spindle power: 0.5 kW Type of attachment tailstock: MT2 Tailstock quill stroke: 20 mm Machine dimensions: 2350 x 1480 mm Weight: 1600 Kg

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Rbjdpfx Adjw T Sd Tobst Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: refurbished (used), functionality: fully functional, center height: 100 mm, grinding length: 650 mm, Internal & external cylindrical grinding machine Studer S20-2 Centre distance: 650 mm – Centre height: 100 mm Accessories on request! Rbjdeqv Eg Rjpfx Adbot Ready for delivery!

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Rodpfx Adow T Sc Njbsbt Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, Year of construction: 1989, Technical details: grinding diameter: 300 mm grinding length: 540 mm Rbedpfx Ader R Elpobjt centre height: 175 mm total power requirement: 20 kVA centre distance: 1000 mm

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Studer S20 in very good condition with accessories and documentation Redswa Iimspfx Adbebt

Condition: used, Year of construction: 1987, grinding diameter 200 mm grinding length 400 mm Rodevw Duujpfx Adbjbt centre height 100 mm Geometrically overhauled and repainted With internal grinding device Accessories on request The machine can be viewed in operation at the customer's premises from 2025 through January 2026.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 1, grinding length: 1,000 mm, grinding width: 600 mm, Geibel & Hotz FS 1050 SD horizontal surface grinder Redpfov U Dfusx Adbjbt Grinding area 1000 x 600 mm Fine pole pitch of the magnetic plate Many flanges and discs Large paper belt filter Adjustable feet Blade and circuit diagram Balancing scale Machine was in use a maximum of 2 days a week - Not a standard machine Pricing: ex-works - unpacked - uninsured Delivery time: immediately - subject to prior sale Errors excepted - technical data is non-binding

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,500 kg, The machine can be tested under power. Rbedow Idwzopfx Adbjt

Condition: used, Cylindrical grinder STUDER S20-2 Rbjdpfx Adexrg Hxjbjt

Condition: good (used), Distance between centers: 1000 mm Height of centers: 175 mm Grinding length: 500 mm Rbsdstt Rawepfx Adbjt Maximum grinding diameter: 300 mm Working wheel dimensions (OD x ID x W): 500 x 203 x 80/100 mm Internal Morse taper: 5 Working wheel motor power: 7.5 kW Total power: 17 kW Longitudinal travel of the carriage (X-axis): 267 mm Transverse travel of the carriage (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Rotating range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approximate weight: 4200 kg

Condition: excellent (used), Year of construction: 1988, TECHNICAL DETAILS: - center height : 100 mm Redpfxowc En Se Adbobt - distance between centers : 400 mm - length of internal grinding : 100 mm - Ø of internal grinding : 3 to 40 mm - maximal table orientation : 30 ° - workhead : spindle speed (variator): 60-1200 Rpm motor power : 0.5 kW internal cone : morse 4/2 - external grinding wheels size : 350 x 30 x 127 mm - wheelhead : power : 3 kW orientation : 15/30 ° - max part weight : 20 kg - max power required : 5 kW - weight: 1900 kg Accessories/options: - complete internal grinding attachment: 45.000 rpm - Novomatic measuring system - Radius wheel dresser - CBN and other grinding wheels - grinding flanges - wheel dresser - chuck for wheelhead - fix steady - collets - internal grinding accessories - spare parts - coolant tank - documentations - etc.... Very low working hours! Under power in our warehouse!

Condition: refurbished (used), Details see PDF Rbodpfx Ajd H Nrqodbjt Options: -Internal grinding device -grinding up to 3 diameters in 1 working cycle - other options according to customer requirements accessories: on request

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, center height: 175 mm, type of input current: three-phase, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1 rpm, feed length X-axis: 285 mm, feed length Z-axis: 800 mm, overall weight: 4,000 kg, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, input voltage: 400 V, CNC Cylindrical grinder STUDER S33 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC 21i-TB Software installed: StuderGrind Centre distance: 650 [mm] Height of centers: 175 Stroke X axis: 285 [mm] Min. Stroke speed X axis: 0.001 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 800 [mm] Min. Stroke speed Z axis: 0.001 [mm/min] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.0001 [mm] B axis swivelling stroke: -15 [°] / +195 [°] B axis indexing precision: Hirth 1 [°] Workpiece spindle nose: MT5 Workpiece spindle min. speed: 1 [rpm] Workpiece spindle max. speed: 1500 [rpm] Max. part weight in part holder headstock between centres: 80 [Kg] Type of attachment tailstock: MT3 Tailstock quill stroke: 35 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4000 [Kg] INCLUDED EQUIPMENT: x1 internal grinding spindle type 102560B – speed: 60,000 [rpm] x1 hydraulic swiveling dressing attachment x1 fixed dressing unit mounted on the table x1 rotating wheel dressing unit (electrical) x1 3-jaw chuck Ø170 [mm] - MT5 x1 4-jaw chuck Ø170 [mm] - MT5 x1 magnetic chuck Ø170 [mm] - MT5 x1 2-point steady rest x1 pneumatic tailstock lift x1 pneumatic upper-table lift x1 longitudinal slide with rotary table - swiveling up to 8.5 [°] x1 automatic B-axis turret wheelhead – Hirth gearing 1 [°] x1 C-axis for thread and form grinding x1 workpiece probe MOVOMATIC C25 x1 contact control device DITTEL SENSITRON 6 x1 semi-automatic wheel balancing device MPM type BMT100M Rbodpjxywhpofx Adbjt x1 paper filtration unit ARO TECHNOLOGIES type 5491.246A01 x1 mist extraction unit AIR-FRESH SERVICE type FMN-V12 x1 foot pedal x1 electrical cabinet air conditioner x4 external grinding wheel flanges x1 set of lifting equipment x1 axis bracket (for transportation of the machine) x1 set of operating manuals (French, English, and German) More information upon request.

Condition: used, Year of construction: 1995, functionality: unexamined, Distance between centers: 650 mm Rodpfx Adswu Tdfsbobt ID / OD 2-axis SONY digital read out Coolant tank