Lead/traction spindle lathe

Sunmaster FC-2160

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: Rsdpfx Asu Ix E Hsdbebt -chuck spanner -tool holder -2 pieces gears *

Condition: new, Year of construction: 2025, 0554 mm 370 mm 2000 mm 280 mm 104 mm 11 kW Rjdpfx Adewyd Tnobsbt

Condition: new, Year of construction: 2025, 0460 mm 270 mm 1500 mm 230 mm Rjdpfewrma Uox Adbebt 76 mm 11 kW

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Rbjdpfx Adjwu Du Ijbot Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: new, Center length ----- 3000 mm Center height ----- 280 mm Turning diameter ----- 560 mm Passage of main spindle ----- 105 mm Bed width ----- 350 mm Spindle speed ----- 25-1620 rpm Motor ----- 7.5 KW Rbodpfxot Iq D To Adbst INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOC3 with 4 scoops * Electric brake * 3-Chuck 315 mm * 4 chuck 400 mm * chuck 450 mm * Fixed and moving grips * LED working light and cooling system * Case with various tools

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: Redpjvtp Edofx Adbsbt A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: used, turning diameter over cross slide: 400 mm, total length: 4,640 mm, total width: 1,450 mm, total height: 1,355 mm, overall weight: 3,700 kg, TECHNICAL DATA Brand: Cazeneuve Model: HB725X3000 DIMENSIONS Length: 4,640 mm Width: 1,450 mm Height: 1,355 mm Weight: 3,700 kg SPECIFICATIONS Swing over bed: 725 mm Swing over carriage: 670 mm Swing over cross slide: 400 mm Spindle bore diameter: 81 mm Distance between centers: 3,000 mm Center height: 315 mm Bed width: 505 mm Spindle motor power: 16 kW Spindle speed: 2,000 rpm Rodpfxsxz Dtho Adbsbt Tailstock quill taper: MT-6 ACCESSORIES Sony digital readout

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 440 mm, spindle bore: 105 mm, turning diameter: 660 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Travis lathe model T 26120A/3000, with 3,000 mm between centers, swing over bed 660 mm, over cross slide 440 mm, swing in gap 900 mm, spindle bore diameter 105 mm, 16 speeds from 25 to 1600 rpm, equipped with fixed and traveling steady rests, fitted with a 3-jaw chuck of 250 mm diameter, motor power 12 HP, weight 3,850 kg, overall in good condition. Rbjdpjxytpvofx Adbot

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 185 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK Rjdoxaau Eepfx Adbobt weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool