Honing machine

Sunnen

Condition: used, SUNNEN ML2000 Honing Diameter Range: - Manual Stroking: 1.5 mm to 165 mm - Power Stroking: 1.5 mm to 102 mm Spindle Speed: - Infinitely variable from 200 to 3,000 RPM Stroke Rate: - 60 to 350 strokes per minute Automatic Sizing Range: - 3 mm to 51 mm Oil Tank Capacity: - 106 liters Pneumatic Requirements: - 5.5 bar Machine Dimensions: Rjdpfeyf N Adjx Adbobt - Length: 1,600 mm - Width: 1,220 mm - Height: 1,900 mm Weight: - Approximately 725 kg

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. VAT is not needed if the sales happen outside of Turkey. Rbsdpfx Adevtancsbjt

Condition: ready for operation (used), Horizontal honing machine Manufacturer: SUNNEN Rodpfx Adsyfna Usbsbt Coolant system Machine lamp

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Weight 800 kg Rbjdpewgm Sajfx Adbet Tools

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring Rsdpfx Asx E Dncedbebt - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: ready for operation (used), Speed: 300/450/650/800 rpm Diameter range: 3 mm 66 mm Rodpox Imphefx Adbsbt

Condition: used, functionality: fully functional, Sunnen MBB-1660G Precision Honing Machine. Make - Sunnen Model - MBB-1660 Job Diameter Range - 1.5 mm to 165 mm Max. Job Length - 406 mm Max. Spindle Speed - 2500 rpm Machine suitable for any material, regular or odd-shaped parts. Good working condition. Please check out our other listings as well. Redpfx Adsv Sd Nhjbsbt

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Rodpfjw Ucyuex Adbebt Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: refurbished (used), Honing machine SUNNEN ML3500 (like ml5000 ml2000 ec3500 ml 5000 ml 2000) this machine is currently under complete electronic retrofit (Siemens) Rodpfxjw Npt Re Adbjbt Touch screen. Loader interface possible

Condition: ready for operation (used), Year of construction: 2006, operating hours: 2,925 h, spindle speed (max.): 3,000 rpm, overall weight: 725 kg, General Data Machine weight 725 kg Rbsdpfx Ajx D Nw Rodbjt Main Drive Spindle speed range 200–3000 rpm This Sunnen ML 2000 was manufactured in 2006. It's a horizontal honing machine featuring a diameter range of 1.5 – 165 mm for manual stroke and 1.5 – 95 mm for automatic stroke. Stroke length reaches up to 170 mm. It operates with a spindle speed variable from 200 to 3000 rpm and includes a 7.5 kW spindle motor. The machine weighs 725 kg and requires approximately 3.5 m² of space. Contact us for more information about this machine. Application Types Honing

Year of construction: 1960, condition: used, Surface grinder with magnet 250 x 135 Rjdpfx Aoiuz Tgsdbsbt 400 Volt power 1,8 kw

Condition: used, Spindle speeds: 200 - 3000 rpm Stroke rates: 60 - 500 strokes/min Stroke length range: 6.0 - 170 mm Weight: 800 kg Rsdpfx Adjxy Ikzsbsbt All information provided without guarantee.

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm Rbsdpfjncd Ecox Adbet If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Rodpfxjvvxvds Adbjbt Consists of 1 measuring case 50-100mm

Condition: excellent (used), Various new honing stones, horns, guide shoes and accessories Sunnen. Used honing stones Sunnen, PG800-EM Rbedpfoigvraex Adbjt