Wooden rafters

Tanne/Fichte 270x130mm

Condition: new, axle configuration: 2 axles, loading space length: 5,300 mm, loading space width: 2,100 mm, loading space height: 400 mm, color: blue, Carrying capacity: 10.000 kg Nlodpfx Ajv R I A Nobysi

Condition: new, mileage: 5 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,445 mm, overall weight: 3,500 kg, empty load weight: 2,750 kg, maximum load weight: 750 kg, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, CO₂ emissions: 196 g/km, emission class: euro6, color: white, driver cabin: other, suspension: steel, fuel: diesel, machine/vehicle number: 1602-2-2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, traction control, Citroen Jumper Euro6 3500Kg new vehicle EU new car Mileage 5 km Fuel Diesel kW/hp 96/131 Nledpfx Aef D Eg Tsbyji Manual gearbox 6 gear ccm 1.997 cm³ Particle filter, air conditioning, daytime running lights, reversing camera, ESP, ABS, on-board computer, heated mirrors, electric front windows, central locking with remote control, emission class (NFZ): Euro 6, COC papers. Sales body made of GRP Superlight in sandwich construction with alcove, unused and with a large sales hatch across the entire width of the vehicle on the right, 2/3 seater, driving license class B, rear running board, LED lights, reversing camera, non-slip industrial floor R11. Various low-frame chassis available (Fiat, Citroen, Opel). Box body interior dimensions WDH 3500 x 2250 x 2300 mm Side flap 3270 x 1480 mm Permissible total mass 3,500 kg Unladen weight 2,750 kg Paint finish on request Interior fittings Left-hand side: 1 work surface with stainless steel worktop, sliding doors and intermediate shelf, approx. 3500 x 600 x 850 mm 1 double washbasin approx. 600 x 600 x 850 mm WxDxH incl. fresh and waste water tank, boiler and pressure system, soap and paper dispenser. 12V automatic battery charger for the starter battery. 4 wall shelves in white with aluminum edge profile, 2x left 1250 mm and 2x right 1250 mm. Right-hand side: 1 refrigerated counter in 800 mm depth with compressor, storage compartment with extra doors at the bottom, foam insulated housing, display surface in stainless steel, aluminum work surface and front glass, temperature from +1°C to 7°C, approx. 3500 x 800 x 1100 mm WxDxH. Further equipment: Shelf above the sales flap, folding bag shelf at the sales opening. 2 LED panels on the ceiling, 3 dimmable LED spotlights above the sales counter and LED counter lighting. Standard electrical installation 380 volt/16A switchable to 230 volt/16A, 2x feed socket according to CEE standard, RCD circuit breaker, 16 ampere fuse with acceptance, 5 double sockets, hygiene package. Subject to errors and prior sale!

Condition: used, Wörner B4 table drilling machine Thrust: 125mm Speed: - smallest: 650 rpm; - largest 12000 rpm Quill stroke: 50mm Nlsdjv Avayopfx Abyei Clamping surface: 180mm x 160mm Dimensions: 280mm x 550mm x 500mm (W x D x H) Weight: approx. 50 kg You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Nljderzbktjpfx Abysi Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Nodpfx Abji Nthqjyjli Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Year of construction: 1985, condition: ready for operation (used), Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible. Nledpfx Abswt Dbljyei

Condition: good (used), Code: 0117 Brand: GRIGGIO Model: PSA 520 - CE Standard Automatic thickness planer for wood, joinery, furniture, furnishings, sawmills, plastics, composites and various materials - CE Standard Shaft with Tersa cutters Working width mm 520 Min/max working height 3/300 Useful thickness mm 8 N° 4 Tersa cutters Variable feed speed mt/min 5/21 Automatic table lifting Motor Hp 5,5 Nedpfx Ajwiif Isbyoli 3 rollers (1 infeed / 2 outfeed) Overall dimensions mm 1050 x 1000 x 1150 h Weight kg 725

Year of construction: 2025, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels Nedpfxjtu Ikcs Abysli • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Condition: new, Year of construction: 2024, The Mobile Fruit Processing Line is designed to conveniently accommodate all the machines necessary for juice production and a smooth work process. It contains: -Fruit and vegetable washer elevator mill MAXIMILL 3000 Nlodeq Nl Afepfx Abysi -Belt press POWERPRESS 1500 -Transporter for leftover mash -Stainless steel tanks -Diesel pasteurizer -Semi-automatic Bag in Box filler -Juice filters -Sink with a stainless steel table Capacity: 1500 kg/h. Other available capacities: 400 kg/h, 800 kg/h, 1200 kg/h. Features: -The mobile juice line conveniently contains all the machines required for fruit processing & juice production. -Requires only 1 person to operate the whole line. -Mobility is the biggest advantage which eliminates costs for premises and provides the ability to change location. -The juice yield from apples is ~75 % . -All machines are interconnected and controlled automatically. -The mobile juice production unit includes a Bag in Box filler which fills the juice into both Bag in Box and Stand up Pouch packages. -The mobile juice line can be customized on client’s request. -The line is easy to operate and maintain. -The mobile fruit processing line is installed in a specially made trailer which can be easily opened for work and shut when needed. -The biggest advantage of our Mobile Fruit Processing Line is the ability to produce juice anywhere you like. This way the client avoids additional expenses for premises and gets the ability to change work location. Mobility is the key aspect here which provides the client with more possibilities, such as developing a juice pressing service business at various apple farms or different towns.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, cutting width (max.): 1,680 mm, Equipment: safety light barrier, Cutting line Perfecta Year: 2013, little used Bigger, faster, more efficient: With a cutting width of 168 (66"), the Perfecta high-speed cutters have no problems processing large formats. Consisting of: Nedswr Dgxopfx Abysli Pallet loader Perfecta/Baumann BASA 7 Paper jogger Rear loading system Perfecta 168 TS guillotine cutter - 3 color monitors with touchscreen: Cuttronic - Automatic adjustment - Cutting table, side tables and stacker continuously corrosion-free with air cushion - Protection by photo cells - Number of knives: total 6 Unloading system Perfecta BA 6, on the left side of the guillotine cutter This robust cutting line from 2013 is in very good condition and still in production. Inspection possible by arrangement. Available immediately as a complete unit: - BASA 7 pallet feeder - vibrating table - with ZTS 2750 gripper transport system automatically to the rear table of the 168 guillotine cutter - BA6 stacker. This cutting line is suitable for medium to large print runs for continuous, fast, and precise cutting. It is equipped with corrosion-free stainless steel surfaces on the cutting and side tables, a powerful blower for the air cushion system, stop angle correction, and hold-down device.