T-slots Floor Plate

Taque fonte rainurée - Floor Plate 3600 x 1200 x 300 mm

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 Iedpfsvxbm Rox Acgstf The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Itjdpfxju Rqyns Acgef Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ijdexyaf Dopfx Acgotf Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Iedpfx Acsr Dd Avegstf Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Iedpfx Ajphl Ececgjtf Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed Isdpfx Acsh Hm Thegjtf -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Itedpfx Acjdvn E Uegof Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Controller Liebherr LH90 V4, Bosch Rexroth drives Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. We can also assist with setup and commissioning up to production, depending on effort! Iodpfxjwqm A Tj Acgetf

Condition: used, Year of construction: 1984, x-travel 2500 mm Itjdpfjtqqnwex Acgof y-travel 750 mm z-travel 1000 mm table surface area 2550 x 800 mm spindle taper SK 50 control HEIDENHAIN, TNC 150 B weight of the machine ca. 16 t

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 Itjdpfx Acjtpnlwsgsf 6. Maximum length of the tool holder - for turning mm 600