Sweeper scrubber
Tennant M30

Name: Tennant M30
Brand: Tennant
Availability: InStock

Condition

Used

Location

Nederland

Show map

Machine data

Machine type:: Sweeper scrubber

Manufacturer:: Tennant

Model:: M30

Condition:: used

Operating hours:: 2,572 h

Price & Location

Location:: Nederland

Call

Details about the offer

Listing ID:: A12197435

Reference number:: 253649

Update:: 16.07.2025

Description

The Tennant M30 increases productivity by delivering exceptional sweeping and scrubbing performance and also improves health and safety.

Easy to operate and maintain, it quickly improves the image of your facility by cleaning in a single motion (wet or dry). It also cleans three times longer on one water tank using Tennant's innovative ec-H20 technology that uses up to 70% less water.

This Tennant M30 comes standard with:

- Complete service,

- New battery pack,

- Free on-site delivery,

- New wear parts and rubbers,

- Service and overhaul,

- Explanation and instruction,

- Cleaning agents,

- Brushes and accessories tailored to your floor.

Other specifications:

- Type: Sweeper-Scrubber,

- Condition: Occasion,

- Brand: Tennant,

- Model: M30,

- Sit up or walk behind: Sit down,

- Theoretical capacity: 15,860 m²/h,

- Side brush diameter: 53 cm,

- Scrubbing width: 157 cm,

- Mopping width: 150 cm,

- Number of brushes (scrub): 2,

- Brush type: Cylindrical,

- Scrub brush diameter: 30.5 x 122 cm,

Ijdpfsnyiv Nsx Adwjtb
- Brush pressure (scrub): 193 kg,

- Dumpster capacity: 198 liters,

- Clean water tank capacity: 284 liters,

- Dirty water tank capacity: 360 liters,

- Power source: Battery 36V,

- Dirt tank emptying: High discharge system,

- Maximum dumping height: 152 cm,

- Filter area: 7.3 m²,

- Filter type: Panel filter,

- Maximum speed: 13 km/h,

- Maximum slope angle: 10%,

- Drive: rear wheel,

- Filter shaker: Electric,

- Weight (excl. batteries): 1,815 kg,

- Weight (incl. batteries): 2,449 kg,

- Dimensions (LxWxH): 274 x 162 x 147 cm,

- Stock: In stock,

- Working hours: 2,572 hours,

In addition, you can contact Metech for all machine maintenance and reorder cleaning supplies. In addition to this used Tennant M30, we also have new sweeper-scrubbers and used machines available. View our sweeper-scrubbers for more information.
Would you like to know more about this Tennant M30? Contact us, we are pleased to tell you all about it.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

97 listings online

Call

Send inquiry

Telephone & Fax

+31 342 2... show

These listings may also fit your interest.

Listing

Birmingham

7,603 km

Press brake
Baykal320ton x 4metre

Call

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Itodpovgc R Hsfx Adweb Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

See details

Listing

USED CNC-LATHE MANUF. MORI SEIKI, MODEL NL 2000/500 MORI SEIKI NL 2000/500

Herning

6,894 km

USED CNC-LATHE MANUF. MORI SEIKI, MODEL NL 2000/500
MORI SEIKINL 2000/500

Call

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. turning length 510 mm X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Itjdpfou Sn Hzex Adwob Collet chuck w/collets Chip conveyor 3 standard tool holders No Gantry loader incl.

See details

Listing

Cnc turning and milling center DMG Gildemeister SPRINT 65 Linear

Uden

7,094 km

Cnc turning and milling center
DMG GildemeisterSPRINT 65 Linear

€27,500

FCA ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Itjdpfx Ajur Hfzedwob

See details

Listing

Turningroll, roller bed, rotator 100t A&N Pr 100-150

Kreuztal

6,928 km

Turningroll, roller bed, rotator 100t
A&NPr 100-150

Call

Listing

Mastic asphalt mixer TICAB Crack Sealer BPM-500 (without trailer)

Rzeszów

5,932 km

Mastic asphalt mixer
TICABCrack Sealer BPM-500 (without trailer)

Call

Condition: new, functionality: fully functional, Year of construction: 2025, Available in stock Capacity – 500 l. Iedpfx Asd Swd Usdwstb Diesel engine. Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket).

See details

Listing

Bühl

6,917 km

CNC Lathe
EMCOMAXXTURN 45

Call

Condition: used, Year of construction: 2007, turning diameter 300 mm swing over bed 430 mm swing diameter over slide rest 300 mm control SIEMENS, SINUMERIK 840 D travel -x axis 160 mm travel -z axis 510 mm Part length max. 480 mm main spindle bore 53 mm main spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm main spindle drive 15 kW sub spindle bore 53 mm sub spindle speed 0 - 7000 U/min spindle head DIN 55026 A2-5 max. torque on the spindle 100 Nm sub spindle drive 15 kW C-axis resolution 0,001 ° C-axis rapid feed 1000 U/min tool turret 1 x 12 Stat. number of driven tool stations 1 x 12 tool shaft (cylinder shaft DIN 69880) VDI 25 speed of driven tools 0 - 8000 U/min Itodpfx Adswx R Rkjwob max. torque 16 Nm output 4 kW feed power X/Z axis 4000 / 6000 N rapid traverse X-axis 24 m/min rapid traverse Z-axis 30 m/min total power requirement 38 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,65 x 1,84 x 2,32 m Accessories: collet fixture 173 E on main spindle, collet fixture 163 E on sub spindle, bar loading magazine make FMB, model turbo 3-36/3200 A, YOM 2018, for bar dia. up to 36 mm and bar length up to 3200 mm, various toolholders for turret (no driven toolholders), coolant

See details

Listing

CNC Turning- and Milling Center DOOSAN Puma TT 1800 SY

Bühl

6,917 km

CNC Turning- and Milling Center
DOOSANPuma TT 1800 SY

Call

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm Itedoxn Amtopfx Adwsb control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

See details

Listing

20-ft. NEW Container one way Supreme RIJEKA 20-Fuß | See-/Lagercontainer | RIJEKA

Rijeka

6,431 km

20-ft. NEW Container one way
Supreme RIJEKA20-Fuß | See-/Lagercontainer | RIJEKA

€1,800

FOB fixed price plus VAT

Call

Listing

Milling Machining Centers 5 Axis HEDELIUS RS605 K IC 40/530/570/500/8

Hattingen

6,987 km

Milling Machining Centers 5 Axis
HEDELIUSRS605 K IC 40/530/570/500/8

Call

Condition: used, Year of construction: 2011, travel -x axis 570 / 500 (1.070) mm travel -y axis 650 mm travel -z axis 530 mm control HEIDENHAIN iTNC 530 number of spindle speeds 12.000 U/min tool taper SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, ITC (50bar), zero-point clamping system and chip conveyor. Ijdpfx Adjwlvraswstb The machine only has 7.863h spindle hours. An extensive tool package is included. The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS605 K IC 40 | RS-605 | RS 605

See details

Listing