Tietjen Hammer Mill GD12 ATEX

Tietjen GD12 ex

Condition: excellent (used), Year of construction: 2014, operating hours: 2,320 h, functionality: fully functional, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, volume flow: 2,040 m³/h, empty load weight: 3,500 kg, power: 170 kW (231.14 HP), Equipment: chassis, rotational speed infinitely variable, Second-hand UHP Unit – Hammelmann Aquajet 17 Hammelmann Aquajet 17 – 2,500 bar High-Pressure Unit on Trailer | Year of manufacture 2014 | Only 1,500 high-pressure operating hours For sale is a Hammelmann Aquajet 17 high-pressure unit in a road-going version on a trailer, manufactured in 2014. The unit is in very good and well-maintained condition and is technically flawless. With only approximately 1,500 high-pressure operating hours, the unit has been used relatively little. Bwjdpfxezv Uk Tj Ah Sew Technical Data / Features: • Model: Aquajet 17 Volvo engine • Year of manufacture: 2014 • Version: Road-going / Trailer • Last service: at approximately 2,290 operating hours • Condition: very good, well-maintained and technically flawless • Availability: immediately Sale and Delivery: The unit is available immediately. Delivery terms: EXW / from location.

Condition: used, Year of manufacture 2003 2.2 kW 3.0 HP Bedjw Upn Eopfx Ah Seww including documentation, COC

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Bwjdow I Uizepfx Ah Sew Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Bwodpfexvrt Sox Ah Sow

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Bsdpfxjwbginj Ah Sjww Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Bwsdpfxeua Tbwj Ah Sew Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet Bedpfx Ahoyt Iawe Ssww + 2 pairs of new shafts Machine is without gearbox.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH jaw crushers are designed to offer high durability and superior crushing performance, making them ideal machines for primary crushing operations in quarries and mines. They have the capacity to process a wide range of materials, from the softest limestone to the hardest types of granite and basalt. Their robust construction, high flywheel torque, and special jaw geometry ensure high-efficiency crushing of material into uniform sizes. The advanced hydraulic adjustment mechanism allows for easy adjustment of the desired output size and minimizes operator intervention. CONSTMACH jaw crushers ensure long-lasting use with their forged chrome-nickel steel pitman structure, heavy-duty bearings, and automatic lubrication systems. The welded main frame, which has undergone thermal stress relief treatment, maintains maximum durability even under high vibration. The user-friendly maintenance design provides an uninterrupted and safe working environment during production processes. These machines can be integrated into stationary or mobile crushing plants, offering high flexibility for projects. CJC-60 Technical Specifications Bwjdjxqgt Aopfx Ah Sjw Mouth Size: 600 x 380 mm Motor Power: 30 kW Shaft Speed: 330 rpm Weight: 6,000 kg Min./Max. Adjustment: 30 - 100 mm Production Capacity: 60 - 110 t/h CJC-90 Technical Specifications Mouth Size: 900 x 650 mm Motor Power: 75 kW Shaft Speed: 277 rpm Weight: 11,400 kg Min./Max. Adjustment: 50 - 150 mm Production Capacity: 90 - 270 t/h CJC-110 Technical Specifications Mouth Size: 1,100 x 850 mm Motor Power: 132 kW Shaft Speed: 230 rpm Weight: 33,000 kg Min./Max. Setting: 60 - 200 mm Production Capacity: 150 - 420 t/h CJC-130 Technical Specifications Jaw Opening: 1,300 x 1,000 mm Motor Power: 160 kW Shaft Speed: 220 rpm Weight: 42,500 kg Min./Max. Adjustment: 100 - 280 mm Production Capacity: 275 - 790 t/h CJC-140 Technical Specifications Jaw Size: 1,400 x 1,100 mm Motor Power: 200 kW Shaft Speed: 220 rpm Weight: 52,000 kg Min./Max. Adjustment: 120 - 280 mm Production Capacity: 420 - 850 t/h Why Choose CONSTMACH Jaw Crushers CONSTMACH is a symbol of quality and reliability in crushing and screening technologies. Each jaw crusher model undergoes production processes that comply with international standards, ensuring maximum performance, low operating costs, and a long service life. With customizable design options tailored to customer needs and an extensive service network, it supports your business's uninterrupted production goals. In terms of reliable performance, engineering quality, and after-sales technical support, CONSTMACH is the right choice for crushing systems. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), type of cooling: air, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Bwedevllxdjpfx Ah Sjw Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: excellent (used), Year of construction: 2014, operating hours: 8,884 h, functionality: fully functional, mileage: 68,462 km, power: 397.17 kW (540.00 HP), first registration: 03/2014, overall weight: 32,000 kg, fuel type: diesel, color: green, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, trailer coupling, truck registration, Very well-maintained, fully functional wood chipper. Man TGS 35.540 8x4 with Adblue, Chippo 5010 dT, rotating model. Bedpfsz E S Swsx Ah Ssww 4272 rotor operating hours.