Center Lathe

TONGIL TIPL5-530x1550

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder Dusdod Du T Iopfx Aa Nst • Motor protection switch • Automatic shut-off

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm Djdpfx Aaeb N Eh Hj Nsut passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Dodjvzxpbspfx Aa Nsut Forging hammer as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm Dusdpfjviqybox Aa Njt spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: Dodporqwbiofx Aa Njut ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Dsdpfxev Rpn Tj Aa Nsut We cordially invite you to cooperate!

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Dodpfjnzpx Rjx Aa Nout

Condition: good (used), Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 Dujdpfx Ajyaypkoa Net -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009 Duedpfx Asupg Scja Njt

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm Dusdpfsflrg Tox Aa Not spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg