TRAUB TNC65 DG
TRAUB TNC65 DG

Name: TRAUB TNC65 DG
Brand: TRAUB
Availability: InStock

Year of construction

1999

Condition

Used

Location

Germany

Machine data

Machine type:: TRAUB TNC65 DG

Manufacturer:: TRAUB

Model:: TNC65 DG

Year of construction:: 1999

Condition:: ready for operation (used)

Operating hours:: 1,24,009 h

Price & Location

Location:: , Germany

Call

Technical details

Number of axes:: 5

Details about the offer

Listing ID:: A22260517

Reference number:: DE-TUR-TRA-1999-00002

Update:: 03.07.2026

Description

This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details.

• Control system: TRAUB TX8H (32-bit technology)
• Main spindle: Yes
• Counter spindle: Yes
• Spindle synchronization: Yes
• C-axis main spindle: Yes
• C-axis counter spindle: Yes
• V-axis: Yes (programmable position)
• Tool carriers: 2 (tool carrier I and II)
• Driven tools on tool carrier I: Yes
• Driven tools on tool carrier II: Yes
• Number of tool stations: 10 per tool carrier
• Thread cutting: Without compensating chuck
• Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3)
• Coolant system: Cleaning system with cyclone filter
• Coolant tank capacity: approx. 470 liters
• Coolant pump: Supply for both turrets integrated
• Hydraulic system: Yes
• Operating voltage: 400 V / 50 Hz
• Control voltage: 24 V DC
• Accessory voltage: 230 V / 50 Hz
• Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V
• Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204
• Tool monitoring: Tool breakage and wear monitoring
• Programming software: TRAUB Polyform
• Coolant type: Water-based coolant compatible

Additional equipment

• Chip conveyor: Hinged belt conveyor
• Bar feeder: TRAUB DNH 61-3000 (preparation included)
• Workpiece ejection device: Yes
• Workpiece removal device: Yes, with gripper
• Collet system: Röhm, max clamping diameter 60 mm

Technical Specification
Counter Spindle Yes
Driven Tools Yes
Bljdpfx Amozim Hgsnji

Seller

Registered since: 2017

1,386 listings online

Call

Send inquiry

Telephone & Fax

+49 631 7... show

These listings may also fit your interest.

Listing

Iserlohn

6,958 km

CNC turn-mill center
TRAUBTNC65DG

€10,500

ONO plus VAT

Call

Listing

Automatic second-operation lathe HANWHA XD-38H

Berlingo

6,776 km

Automatic second-operation lathe
HANWHAXD-38H

Call

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: XD-38-BE-0175, turning length: 310 mm, spindle speed (max.): 8,000 rpm, overall weight: 4,050 kg, bar passage: 38 mm, Siemens 840D control - Iemca Boss 545E-r/32 bar feeder - Nanocool CIL750 A-CT oil cooler - machine has operated with oil Bedpfewydiijx Amnjli

See details

Listing

Hattingen

6,987 km

CNC Lathe
TRAUBTNC 42/65 DG

Call

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition. Bjdpjxbtq Nofx Amneli The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

See details

Listing

Swiss type CNC lathe Gildemeister GD 32 Gildemeister GD 32-5A

Veniano

6,857 km

Swiss type CNC lathe Gildemeister GD 32
GildemeisterGD 32-5A

Call

Condition: ready for operation (used), spindle bore: 36 mm, turning diameter over cross slide: 33 mm, turning length: 320 mm, Technical Data: Main Spindle: - Maximum turning diameter: 33 mm - Maximum speed: 8,000 rpm - Drive power: 5.5 kW - Drive power at 60% duty cycle: 7.5 kW Slide 1: - Z1 slide travel: 320 mm - X1 slide travel: 50 mm - Y1 slide travel: 255 mm - Rapid traverse speed: 30 m/min - Ballscrew diameter: 25 mm Tool Slide 1: - Number of stationary tools with 16 x 16 shank: 5 tools Blodpfow Rcd Ejx Amnoi Slide 2: - X2 slide travel: 165 mm - Z2 slide travel: 200 mm - Rapid traverse speed: 30 m/min - Ballscrew diameter: 30 mm Tool Slide 2: - Number of turret stations with integrated spindle: 8 positions - Number of axial driven tools (integrated): 8 positions Coolant tank capacity, approx.: 400 liters Coolant pump max. flow rate: 80 l/min Dimensions (L x W x H), approx.: 2,460 x 1,510 x 1,750 mm Equipment: - Fanuc iT CNC control - Parts discharge system - IEMCA bar loading magazine - 5-position tool plate for Slide 1 - Electrical and software interface for bar loading magazine - Drill holder for main spindle and pick-up spindle - 2 double drill holders for rear working support with cylinder - Part pusher for pick-up spindle

See details

Listing

Brigachtal

6,895 km

CNC sliding headstock lathe
MaierML26C

Call

Condition: good (used), Year of construction: 2005, functionality: fully functional, Fanuc control system, Spindle bore 26 mm, Counter-spindle, 4 driven tools axially for the counter-spindle, 3 driven tools radially for the main spindle and counter-spindle, FMB tool magazine, Fire extinguishing system, Bedoyyxkzjpfx Amneli High-pressure pump. No guarantee for the accessories shown in the photograph.

See details

Listing

CNC lathe with driven tools and Y-axis; CNC control FANUC Series 18i-TB, machining center. MONFORTS RNC 300 MultiTurn

Hessisch Lichtenau

6,811 km

CNC lathe with driven tools and Y-axis; CNC control FANUC Series 18i-TB, machining center.
MONFORTSRNC 300 MultiTurn

€29,000

Fixed price plus VAT

Call

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 Bsdpfx Aszfau Aomnsli - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

See details

Listing

Turning automatic lathe Citizen C 32 VIII 2M8

Oestrich-Winkel

6,928 km

Turning automatic lathe
CitizenC 32 VIII 2M8

Call

Condition: good (used), Year of construction: 2008, CNC Swiss-type lathe Machine type: Citizen C-32 VIII 2M8 Year of manufacture: 2008 TECHNICAL DATA: Bjdpfx Amjy D Spljnjli Main spindle Max. turning length: 320 mm Turning diameter: 32 mm Speed range: 200 - 8,000 rpm Sub spindle Speed range: 200 - 7,000 rpm Driven tools Equipment: Bar feeder: FMB turbo 3-36

See details

Listing

Swiss-type cnc lathe TORNOS DECO 2000/10

Contamine-sur-Arve

7,060 km

Swiss-type cnc lathe
TORNOSDECO 2000/10

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] Blsdpfx Asy Aprhemnji - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

See details

Listing

Turning automatic lathe CITIZEN Cincom M332-III

Telford

7,637 km

Turning automatic lathe
CITIZEN CincomM332-III

€51,600

EXW Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2008, functionality: fully functional, 2008 CITIZEN Cincom M332-III Blsdpfxjy Sycvo Amnoi Fully serviced, well maintained, and ready to go: ✔ Iemca Boss 332 R - 3m Magazine Bar Feeder ✔ Coolblaster High Pressure Coolant ✔ Absolent Mist Extraction ✔ Selection of Static & Driven Tooling ✔ Fire Suppression System

See details

Listing