Swiss-type cnc lathe

TRAUB TNL 18-7B

Condition: used, TECHNICAL DETAILS Nljdpfx Ahszbvnlenjf - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 18 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 3.0 / 5.5 [kW] - C axis indexing precision : 0,001 [°] - Z stroke : 205 [mm] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 1,5 / 2,5 [kW] - C axis indexing precision : 0,001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - Number of motorized positions : 8 - Live tools speed : 12.000 [rpm] - Live tools power : 1 / 2 [kW] - X/Z stroke : 165 / 550 [mm] - Y stroke : -40 / +25 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 42 [m/min] - B Axis stroke : 100 [°] LOWER TURRET - Number of positions : 7 - Number of motorized positions : 7 - Live tools speed : 12.000 [rpm] - Live tools power : 1.5 / 2.5 [kW] - X/Z stroke : 120 / 250 [mm] - Y stroke : -20 / +40 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 50 [mm/min] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 10.000 [rpm] - Live tools power : 1 / 2 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 24 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.060 x 1.480 [mm] - Machine height : 2.420 [mm] - Machine weight : 4300 [kg] MACHINE HOURS - Number of working hours : 14998 [h] - Number of spindle hours : 11177 [h] EQUIPMENT - CNC : Traub TX 8i-s - Rotating guide bush - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank * with high-pressure pump * with paper filtering unit - Bar loader : IEMCA ELITE 220 / 32 XL - Oil mist extractor : ELBARON RON/A 1500 DH - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Nodstqf Rzjpfx Ahnolf Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 18 [mm] - Spindle speeds : 12.000 [rpm] - Spindle power : 3.0 / 5.5 [kW] - C axis indexing precision : 0,001 [°] - Z stroke : 205 [mm] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] Nlsdezlk Aqepfx Ahnsf - Spindle speeds : 12.000 [rpm] - Spindle power : 1,5 / 2,5 [kW] - C axis indexing precision : 0,001 [°] - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - Number of motorized positions : 8 - Live tools speed : 12.000 [rpm] - Live tools power : 1 / 2 [kW] - X/Z stroke : 165 / 550 [mm] - Y stroke : -40 / +25 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 42 [m/min] - B Axis stroke : 100 [°] LOWER TURRET - Number of positions : 7 - Number of motorized positions : 7 - Live tools speed : 12.000 [rpm] - Live tools power : 1.5 / 2.5 [kW] - X/Z stroke : 120 / 250 [mm] - Y stroke : -20 / +40 [mm] - Rapid traverses rates (X/Y/Z) : 21 / 21 / 50 [mm/min] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 10.000 [rpm] - Live tools power : 1 / 2 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 24 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.060 x 1.480 [mm] - Machine height : 2.420 [mm] - Machine weight : 4300 [kg] MACHINE HOURS - Number of spindle hours : 30765 [h] EQUIPMENT - CNC : Traub TX 8i-s - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank * with high-pressure pump : 40 [bars] * with paper filtering unit - Bar loader : LNS EXPRESS 220 - Oil mist extractor : DONALDSON TORIT DCE - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Njdpfsv T Un Dsx Ahnelf Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min Nedpfou Idbyjx Ahnelf control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis Nodpfjx D Drcex Ahnolf • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Nsdew Rpd Sjpfx Ahnolf Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm z-travel 375 mm Nlodpoy Nd U Rjfx Ahnof weight of the machine ca. 7150 kg

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin nonstop unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Electrical Data Nominal current: 500 A Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. Nlsdpfjylypuex Ahnof The press is available for inspection by appointment.

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Nlsdpex D Iv Eefx Ahnof Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning