Agitator Turbo Rurhwerk drive NFLE

Turbo Rurhwerk

Condition: like new (used), Stirrer drive, electric motors, stirrer drive Manufacturer: Turbo Rührwerke Stirrer type: NFLE750 KAF90 A005258/1 Motor type: KAF107 Motor power: 15kW Stirrer speed: 45 rpm Stirrer length: 2700mm See our other listings. Tsdpfx Aswyf Rboirod

Condition: ready for operation (used), Product: Suspension (Sludge ) tank with stirrer, used Volume: 5000 L Other: 1 chamber, 2 stirrers Dimension: LxWxH 2500x2100x1300 mm Todpfx Aed Ezicsired

Condition: used, For converting electrical energy into kinetic energy. Conversion of torque and speed through gearing. Used electric motors, available with and without gearbox, with and without brake, in various designs and with different equipment and key figures. Speeds: 67 rpm Power factors: cosφ Power ratings: kW Amperages: A Voltages: 22 V Frequency: 50 / Hz Gear types: spur gear, worm gear, bevel gear, parallel shaft gear, variable speed gear. Gearbox speeds: 8 - 559 rpm Torques: 5 - 840 Nm Drive: rpm Power factor: 0 cosφ Gearbox drive: 559 rpm Todpfjvcqrkox Airsd Torque: 840 Nm Power: - kW Current: - A Voltage: 22 V Frequency: 50 / Hz

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Additional title: refrigerant ammonia Brew water flow: 5 m3/h 2 bar Ice water flow: 15 m3/h 2 bar Tedpfx Aexbn Upsirjd Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar

Condition: ready for operation (used), For sale is a stirrer motor from TMR, including the drive shaft. This is model MD 5.5 / 1000. Product data: 1440 RPM 380/660 V Todpofwlz Iofx Airsd 5.5 kW 1520 mm shaft length 3 kW

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) Tjdpfx Aoyug R Reirod • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Year of construction: 2015, condition: new, Unused (NOS) Sulzer industrial agitator for tank mixing, with SCABA-S agitator head, stainless steel shaft, and SEW geared motor. The unit is from 2015 and is in new, unused condition. Todpfozlcfwex Airod Manufacturer: Sulzer Pumps Sweden AB Type: SVVT-40 / 40SVV35T-M1 Year of manufacture: 2015 Condition: NOS (unused, stock item) Application: Tank agitator / Industrial agitator Agitator type: SCABA-S Motor power: 1.10 kW Process power consumption: 0.80 kW Mains frequency: 50 Hz Motor speed (n1): 1,500 rpm Output speed (n2): 244 rpm Gearbox manufacturer: SEW-Eurodrive Gearbox type: KAF47 Gearbox design: Helical-bevel gearbox Gear ratio: i = 5.81 Motor adapter: 24FF165 Gearbox mounting position: M1 Flange: Special flange Flange diameter: 340 mm Bolt circle: 295 mm Mounting holes: 8 × Ø22 mm Shaft length: 500 mm Shaft design: Solid shaft Shaft material: Material 1.4462 (LDX Duplex stainless steel) Number of agitator elements: 1 Propeller type: 3SHP1 Propeller diameter: 475 mm Propeller material (hub): Material 1.4462 (LDX) Blade thickness: 4 mm Blade attachment: welded Direction of rotation: right (clockwise) Axial force: 244 N Torque: 43 Nm Bending moment: 74 Nm Minimum stiffness of tank mounting: 250,517 Nm/rad Tank medium (design): Vegetable oil Design temperature of medium: 65 °C Paint color: RAL 5017 Y-ring: present Flushing connection: no flushing