Used other process engineering equipment for sale (77)

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Knodpfx Apjz D Hzqsdjb

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each Knjdoz Ai Tpopfx Apdsb - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI Kodpfx Apozlnb Rsdsnb - The previously installed printer is missing - One or two air hoses are leaking - A test camera is missing - Shipping is possible for an additional charge.

Year of construction: 2012, condition: used, film width: 450 mm, roll width: 500 mm, machine/vehicle number: BA-18609, Equipment: CE marking, Coating Line Used for coating of battery electrodes - Roll width 500 mm - max. Web width 450 mm Kodpfx Apszzpqredjnb - max. Coating width 400 mm - Web speed 0.1-5 m/min - Various substrate films such as copper, aluminium, PET and PES - Doctor blade & slot die coating - Web guide system - Corona pre-treatment - integrated x-Ray areal weight measurement - 1x infrared oven - 2x convection oven Length coater: 14 m The buyer is responsible for the proper disassembly and pickup of the machinery.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen Ksdpfx Apozvcknedenb • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2022, condition: used, functionality: fully functional, Solid Fuel Steam Boiler and Accessories- 3 t/hour-8 Bar- Buhar Kazanı ve Ekipmanları Knodpjy R U T Tsfx Apdsb Types of Solid Fuel : Coal and Pellet Automatic Weighing System for Solid Fuel, Steam Temperature :172 ºC

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Product details: Knjdpfx Apsz Di D Iodsb Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information or to make an offer.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Parker Nitromatic PSA Nitrogen Production Plant – 600 Nm³/h – 99.5% Purity Description A complete industrial plant for nitrogen production using PSA (Pressure Swing Adsorption) technology, designed for continuous 24-hour operation and the production of high-purity nitrogen for industrial applications. The system incorporates air compression, drying, filtration, nitrogen generation, and storage, supplying up to 600 Nm³/h of nitrogen at 99.5% purity in a fully automatic manner. Technical characteristics: • PSA (Pressure Swing Adsorption) technology • Manufacturer: Parker Nitromatic • Nominal capacity: 600 Nm³/h • Nitrogen purity: 99.5% Kjdpszm E Rfofx Apdenb • Maximum generation pressure: 7 bar(g) • Continuous 24-hour operation • Fully automatic operation • Integrated alarm system • Continuous oxygen analyzer with permanent purity reading • Ultra-dry nitrogen • 10,000-liter nitrogen storage tank Included equipment: Compressed air • 3 Atlas Copco GA90 VSD FF compressors • Power per compressor: 90 kW • Variable speed drive (VSD) • Integrated refrigeration dryer • 2,000-liter compressed air tank Air treatment • High-capacity filtration system • Parker MXS107 adsorption dryer • Air quality ISO 8573-1 Class 1.4.1 Nitrogen generation • 6 Parker NitroSource N2-80P generators • Total production: 600 Nm³/h • Integrated oxygen analyzer • Automatic PSA regeneration system Storage • 6 intermediate 1,000-liter tanks • 1 final 10,000-liter nitrogen tank

Year of construction: 2024, operating hours: 960 h, condition: used, functionality: fully functional, Crusher and Screening Machine Year of manufacture: 2024 Location: 54611 Hallschlag Knodpoytdgasfx Apdeb Application: Designed for the reduction of charcoal undersize material, followed by screening and filling into big bags or, alternatively, pneumatic conveying into silos. The smooth roller mill was originally used for the size reduction of clay. These machines offer a wide range of applications and are capable of handling and processing various materials. Plant components: 1. Screw conveyor 1 2. Screw conveyor 2 3. Screw conveyor 3 4. Crusher (smooth roller mill) and steel frame 5. Tumbler screen and steel frame 6. Elevator 1-3 7. Pneumatic conveyor vessel (“sand sender”) 8. Big bag unloading station 9. Piping for extraction/ventilation 10. Electrical/electronic systems in a container The prices listed in the document reflect our acquisition costs. Individual or complete purchase of components is possible. Prices and further technical details available on request.

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: Knjdpfxezxgtfj Apdob 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. Kedpfjzc D Ebjx Apdsnb These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Kedpfx Apoxc Ew Djdenb Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm See our other ads VMA Wekerom

Condition: used, functionality: unexamined, Ultrasonic welding system, Ecoline 20L model Kjdpfxezlchle Apdsnb - Ultrasonic generator K5 2000W/20kHz - Shipping available for an additional charge.

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Ksdozl Scropfx Apdsnb Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Knjdpfxsy Iamtj Apdeb

Year of construction: 2018, condition: used, Loma Systems IQ 3+E metal detection conveyor The conveyor drive motor must be connected separately. Knsdpfxozc N D Ae Apdsb The machine was previously used in an inline configuration. Year of manufacture: 2018

Year of construction: 2007, operating hours: 0 h, condition: excellent (used), machine/vehicle number: 1202, FAN: TRA-BO TGR 710/T year of manufacture 2007 Support type: BLC 60-120 Wheelbase 580 Power 15 kW -4P Motor size:≤ML4 Maximum rotation speed Kedpfx Aefm U Uvopdjnb ᐸ 100°C = 3150 100 ÷ 200°C = 2780 200 ÷ 300°C = 2500 ATEX MAX 60°C MAX rpm = 3.000 Belt: 4SPA1825 Absorbed power tolerance ± 3 % Noise tolerance + 3 dB Weight of ventilator in kgf 270 kgf The Fan cannot be revolved. Lp = sound pressure level between 68 dB/A and 89 dB/A Pd =discharge gauge pressure between 1 and 300 kgf/m2 Qv= flow rate between 1 and 10 m3/s or 1 and 35.000 m3/h The rest of the data can be found in the technical diagram attached. Price: 1.900 Euro + VAT, FCA, Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: SN 552000000, GH hardening machine Knedpfx Apsx Eyqmedeb Hardening machine 9 Serial No.: 55200000 Year of manufacture: 1999 Power: 65 kW Generator output: 50 kW Generator voltage: 400 V Frequency: 100–200 kHz Roller diameter: 12–29 mm Control: Sinumerik 840D Parts feed Conveyor belt for parts removal

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Knjdpezty Hnofx Apdjb Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Year of construction: 2006, condition: used, This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions. Capacity: 240 hl/h 2 stages Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm Knsdpfxoztzbyo Apdsb Operating pressure: 23 bar Length: 2000 mm Width: 700 mm Height: 2000 mm

Year of construction: 1993, condition: used, Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h Additional title: 2-stage heat exchanger Capacity: 600 hl/h Hot water: 750 hl/h Operating pressure: 21 bar Operating temperature: 100 °C Length: 2,15 m Width: 0,95 m Height: 2,15 m Knsdeztzckopfx Apdob Weight: 5000 kg Material: EPDM HT / NBR / 1.4439

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Kedpfjv Extbox Apdonb

Condition: like new (used), Liquid tank, buffer tank, silo, liquid vessel, tank Capacity approx. 175 liters Knedpswyf Uysfx Apdob Diameter 600mm Height incl. funnel 900mm Equipped with level sensor (operation unknown) Entirely stainless steel and mobile

Year of construction: 2015, condition: ready for operation (used), This is an inclined wire paper machine for the production of filter nonwovens, filter paper, insulation paper, membrane carriers, cardboard, tablecloths and more, speed: 5-120m/min, flow rate: 2500-20,000l/min, the manufacturers are various companies from Canada, Ukraine and Europe, some modifications have been made to the system such as a new shredder, larger vacuum pump, vibrating screen for water treatment, second headbox, new distributor and more, an inspection is possible. Kodpfx Apsqzyaxsdjnb

Year of construction: 1988, condition: used, Used Wynveen Cryloc Sieve For sieving pellets after pelletmill / pelletpress Kedpoqwyxkefx Apdjnb