Clamping plate

unbekannt 3990/1990/H830 mm

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Fedpfx Apey I Ak Ijtjgg Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Fgodpfx Apoi A Ix Hjtog

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Fgjdpetx Dn Ujfx Aptjg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C ±360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) Fjdpfsy Tv Nbsx Aptsgg TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBE LASER TOOL MEASUREMENT APS - Advanced Process System APS Extended ITS - Intelligent Thermal Control CINEMATIC OPTIONS CHIP CONVEYOR WITH TSC MACHINE WEIGHT: 19,000 KG

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min Fsdpfx Apspuy H Djtjgg - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: used, Year of construction: 2002, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm Fedpfsw Ei Stjx Aptjgg max. workpiece size X: 1050 mm max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg U / V axis: 770 x 520 mm generator: 60 Ampere Linear drives

Condition: good (used), Year of construction: 1997, Max. sanding length 1,400 mm Max. sanding width 610 mm Max. sanding height 550 mm Max. longitudinal stroke 1,480 mm Max. cross stroke 560 mm Fgsdpfor A Evrsx Aptog Infinitely variable table speed 1 - 30 m/min Grinding wheel size 406 x 51 x 172 mm Max. table load 1,800 kg Total power supply 20 kW Machine weight approx. 6,500 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,000 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total width: 1,050 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, controller model: D‑CUBES / M800 series, product length (max.): 3,030 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details. • Axis travels: U ±75 mm, V ±75 mm • Max. workpiece dimensions (W × D × H): 1050 × 820 × 305 mm Fgedpfoy Rrcfjx Aptsg • Max. workpiece weight: 1500 kg • Table dimensions (W × D): 840 × 640 mm • Max. taper angle: 15° at 260 mm workpiece height • Wide‑angle taper (option): up to 45° at 60 mm (with special guides) • Positioning accuracy: ≤ ±2 μm over full stroke (MV‑R series spec) • Dielectric tank capacity: 860 L • CNC control: Mitsubishi D‑CUBES / M800 series; Industry 4.0 ready (networking and monitoring interface) • Machine condition: Excellent condition; very low hours • Industry 4.0: Prepared for connectivity

Condition: excellent (used), Year of construction: 2020, operating hours: 13,800 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Fgedjxnx Itspfx Aptsg Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Fedpfxsxwmacj Aptjgg Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018