Drawer cabinet for bending tools

unbekannt 640/930/H1215 mm

Condition: like new (used), All parts are for sale, complet. Tsdpohi Tvbefx Aahsc

Condition: ready for operation (used), 4 telescopic drawers, size: 450 x 600 mm Height-adjustable drawers, currently for filling heights: 100, 120, 250 and 320 mm Required space: 720 x 550/750 x 1170 mm Tjdpfx Aaoixzzrshjc

Condition: used, Straight-Cut Cutting Bench 40, manufactured by MEP Number of bars: - n.1 Ø 40 - n.2 Ø 32 - n.3 Ø 26 - n.4 Ø 20 - n.5 Ø 16 22 Fy= 600 N/mm - ft= 650 N/mm Tjdpfx Aasvtx Eyjhec Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5 Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5

Condition: used, 6 St. 70/100 kg ca. 820 x 740x 560 mm weight ca.110 kg Tjdpoyhhu Defx Aahec drawer measurements 450 x 600 mm Colour 7035/5012 RAL

Condition: good (used), Offer 35503 Technical Data: - 6 pieces of roller-bearing drawers, extendable up to 90% - Drawer size each approx. W 450 x D 530 mm - Drawer heights: 3 x H 85; 2 x H 130; 1 x H 180 mm - No key available - Cabinet space requirement approx. W 540 x D 630 x H 1000 mm Tjdpfx Aaszi S S Ujhjc - Weight 80 kg

Condition: excellent (used), Year of construction: 2001, Tool milling machine Macmon M 100 NC Infinitely variable speed control, Tool holder SK 40 Tedpox Hga Djfx Aahjc Coolant device Operating manual

Condition: used, Offer 35504 Technical data: - 7 pieces of ball-bearing drawers, each 90% extendable - Drawer size approx.: W 510 x D 600 mm each - Drawer heights: 1 x H 85 mm; 1 x H 65 mm; 5 x H 125 mm Tsdpfjwzvlfox Aahsc - No key available - Required cabinet space approx.: W 650 x D 700 x H 1020 mm - Weight: 80 kg

Condition: good (used), Drill press, drill press, stand drill, pillar drill -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: Todocpbwbjpfx Aahsc -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: approx. 1250/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 230 mm -Transport dimensions: 1250/960/H1140 mm -Weight: 138 kg Tsdpfxexzzmrj Aahjc

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Todpfxew Ixz Uo Aahsc Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.