Interchangeable jaws

unbekannt Breite 20 mm

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available Price: per set Gjdpfeq Ei Ekjx Ah Dekf -Overall dimensions: 70/60/H54 mm Total weight: 1.1 kg/set

Condition: excellent (used), Year of construction: 2012, Four-jaw chuck Gjdefklf Uspfx Ah Dekf Make Röhm diameter 315 mm bolt circle 120 mm single adjustable jaws center hole 120 mm pitch 625/4 gear / inch

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard Gsdpfx Ahst Hmkgs Dekf -Jaw width: 20 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 70/60/H54 mm / 69/60/H54 -Total weight: 1.1 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm Gkjdpfxjw U Aq He Ah Dof -Dimensions total: 84/63/H38 mm -Total weight: 1.1 kg

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW Godpfx Ahetqmm As Dekf weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard Gkodpfxjq Exils Ah Def -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 66/60/H43 mm -Total weight: 0,8 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 1.3 kg Gedot Acx Espfx Ah Djkf

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Gkjdpetrhq Hsfx Ah Djf Weight approx. 4800 kg good condition

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Gkedpfxjt Hmkme Ah Def -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 90/60/H62 mm -Total weight: 1,6 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, soft -Jaw width: 20 mm -Dimensions: see photos -Total dimensions: 85/60/H40 mm Gkodpfjtigxbox Ah Def -Total weight: 1.0 kg

Condition: good (used), Year of construction: 1975, Deckel FP3 tool milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle holder, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Gksdeu Ezb Eopfx Ah Def

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Base jaws for three-jaw lathe chucks Gkodpfx Ajq Rg U Esh Dof -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Gkedperhmmrsfx Ah Djf -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Quantity: 3 sets of interchangeable jaws available -Price: per set -Total dimensions: 90/90/H70 mm / 87/90/H65 mm -Total weight: 2.7 kg/ 2.8 kg

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, steep conveyor, steep conveyor, chip conveyor, chip conveyor Gsdpfxjh Ak Ulo Ah Dskf -Conveyor belt: conveyor belt with base -Speed: 41 m/min -Strap width: 480 mm -Conveyor length: approx. 4000 mm -Motor/gearbox: SEW Vector, 0.55 kW / 110 rpm -Total dimensions: 4540/730/H1090 mm -Weight: 300 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Number: 1x set of interchangeable jaws available -Price: per set -Dimensions total: 70/60/H55 mm / 70/60/H54 mm -Total weight: 1.1 kg/set Gksdet Acv Repfx Ah Def