Rapid Radial Drilling Machine

UNBEKANNT radialbohrmaschine

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice Bedpfx Ajvpfzysf Aowu *

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA rated current 6,1 A weight of the machine ca. 1 t Bwedpsrxg S Tjfx Af Asu

Condition: good (used), Year of construction: 1984, machine/vehicle number: 332, Offer 24130 Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg Bjdpfx Aotxzrwof Aswu - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Bwodpfxex N Ih Ie Af Asu Coolant system Safety device at the drill Completely overhauled in 2026

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 32 mm arm length: ./x. . 400 / 50 mm drill head horizontal traverse: 400 mm drilling head vertical adjustable: 400 mm bore spindle stroke: 150 mm spindle taper MT: 4 grinding spindle speed: 100 - 2000 U/min Arm length: Spindel: min./max: ca. 400 / 50 mm cantilever adjustment vertical: 850 mm cantilever adjustment horizontal: 400 mm arm: Länge: 1360 arm horizontal: schwenkbar mm/min number of revolutions per minute of drill spindle:: 100...2 step U/min. feed steps: 0,1 / 0,2 / - step mm/U Table dimensions: 00 x 510 mm distance table - lower edge spindle: min./max.: 350 / 800 mm total power requirement: 2,4 kW weight of the machine ca.: 1,8 t dimension machine xH: 1,3 x 1,3 x 2,25 m Equipment: Bjdpfowi Iqvsx Af Aewu 2x foot rail Attachment option for a vertical table Accessories: Various clamping devices *

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm Bjdet H Smyjpfx Af Aowu workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg dimensions of the machine ca. m

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm Bedpsywzlpofx Af Aewu -Weight: 1770 kg

Condition: ready for operation (used), Year of construction: 1982, Plate bending G 30 max tickness -30 mm Bwjdpfxsnfu S Do Af Aeu max length 3150 mm rools diameter 500 mm main motor 37 kw

Year of construction: 1968, condition: good (used), machine/vehicle number: 00248, Offer 22311 Technical data: - max. working width 3100 mm - max. cutting capacity St 40 8 mm - motorized back gauge 10 - 750 mm - front angle gauge - stroke rate up to 30 strokes/min Bsdpfx Afsh U Sd He Aewu - drive 400 V / 2 x 6.5 kW - space required incl. back gauge, without front support arms - approx. W 4250 x H 1500 x D 2450 mm - weight approx. 11000 kg

Condition: used, Year of construction: 1976, machine/vehicle number: 761907, General / technical data: Heavy-duty mechanical swivel bending machine with a robust welded construction, in very good condition. Working width: 2000 mm Material thickness for steel ST 50 max.: 20 mm Opening of the upper die (clamping die): max. 475 mm Adjustability of the bending die: 200 mm, motor-driven height adjustment Bending angle: 130°, adjustable via electrical angle input Upper die speed: 6 mm/sec Bending die rotation speed: 1.25 rpm (approx. 90 sec for a 90° bend) Backstop: motor-driven, adjustable from 50-999 mm, with digital length display Bwjdpscvtbyefx Af Asu Machine dimensions (h x w x d): 3600 x 4350 x 4400 mm (without pit / with bending die platform) Control cabinet dimensions (h x w x d): 1800 x 1200 x 400 mm Drive power, bending drive: 30 kW Drive power, upper die (clamping die): 22 kW Power supply: 500 Volt 50 Hz / control voltage 220 Volt Weight: 24,500 kg Accessories / special equipment: • 5 sets of bending tools, each consisting of a clamping and bending rail: R 8, R 12, R 15, R 20, R 40 • Foldable backstop • Central lubrication system • Machine documentation Note: • Machine comes from a repair facility. • A pit 900 mm deep (foundation) is required for the machine. The substructure of the swivel drive visible in the pictures is only used for test runs and demonstrations.