Stacking yokes

Unbekannt Unbekannt

Condition: used, Used Machine Features and Technical Specifications - Motor: 4 kW / 2,910 rpm - With steel blades Codps Af Nafsfx Aizeri - Outlet openings: 200 mm

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Crodpfeyldxmox Aizei Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Condition: used, Technical details: length: 4000 mm width: 1420 mm height over floor: 805 mm Crsdpfozlxbujx Aizsi Payload: 10 t max. wheel diameter: 600 mm track width: 1000 mm control voltage: 80 V electric control: Ja mit Hand weight: 3,25 t dimensions L x W x H: 4,0 x 1,42 x 0,81 m Battery type: Lead-acid Heavy-duty rail transport trolley *

Condition: used, Technical details: Cjdpfx Aieu Nuquszjri band width: 135 mm conveying height: 1020 control voltage: 380 V weight of the machine approx.: 165 kg dimension machine xH: 3,3 x 0,5 x 1,5 m Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20mm -Discharge length (D) 200mm -Discharge height above floor (C) 1020mm -Discharge width 200mm -Insertion length/underfeed length (A) approx. 2000mm -Insertion height (B) 180mm Operation via manual switch Rotating scraper brushes at the discharge and on the left/right side of the infeed beam *

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Codpfx Aedy Hm Dsizeri Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: used, Technical details: table load: 3 t table diameter: 1280 mm table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. Cedpfx Aijxz E Exszeri *

Condition: used, 24 pieces available Credpsdc A Rpofx Aizei

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. Csdpjh Ek Dasfx Aizeri The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: new, functionality: fully functional, Year of construction: 2025, total height: 150 mm, total length: 4,000 mm, total width: 300 mm, load capacity: 16,000 kg, forkExtension Producing company Unbekannt Type Unbekannt Year built 2025 Height (mm) 150 Length (mm) 4,000 Lifting weight (kg) 16,000 Csdpjx Haw Nefx Aizjri Retraction lugs height (mm) 140 Retraction lugs width (mm) 280 Width (mm) 300

Condition: used, functionality: fully functional, Year of construction: 2015, overall weight: 250 kg, total height: 960 mm, total length: 1,030 mm, total width: 2,010 mm, shovel Producing company Unbekannt Type Unbekannt Year built 2015 Height (mm) 960 Cjdpfx Aexpx U Noizeri Length (mm) 1,030 Weight (kg) 250 Width (mm) 2,010

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Closing force: 250 tons Year of manufacture: 1987 Injection weight: 470 g Codjfp U Hvspfx Aizeri Tie bar spacing: 63 x 56

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. Crjdpfov Nhk Dex Aizoi We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Year of construction: 1975, condition: used, functionality: fully functional, We are offering this used, unidentified pastry forming machine, manufactured in 1975, for sale. Manufacturer: Model: Year of manufacture: 1975 Condition: used Crodozh N A Iepfx Aizji Category ID: 9 Machine type: Pastry forming machine In addition, 5-6 trolleys including matching trays for the pastry forming machine are included. Furthermore, there are 6 different rollers in excellent condition. The machine is very old, but as you can see in the video, it runs perfectly. It is ideal for a small bakery that wants to produce some excellent baked goods very efficiently. If you have any questions or need more information, please send us a message or call us.

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Crsdpfx Aisx Ig Hmjzji Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: good (used), Cable rack for large cable reels Consisting of 7 uprights Depth: 0.81 m Bays: 0.75 + 0.75 + 0.855 + 0.855 + 0.945 + 1.05 + 1.05 m width – upright width: 8 x 0.10 m Credpfx Aisy I U Tbjzoi Height: 5.06 m