Rotary Table - Universal

UNBEKANNT / UNKNOWN unbekannt

Condition: used, Technical details: length: 4000 mm width: 1420 mm height over floor: 805 mm Payload: 10 t max. wheel diameter: 600 mm track width: 1000 mm control voltage: 80 V electric control: Ja mit Hand Ledpjzlxbuofx Ag Aoaf weight: 3,25 t dimensions L x W x H: 4,0 x 1,42 x 0,81 m Battery type: Lead-acid Heavy-duty rail transport trolley *

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 Ledpfx Agecxxx Rs Aeaf :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: used, Technical details: band width: 135 mm conveying height: 1020 control voltage: 380 V weight of the machine approx.: 165 kg dimension machine xH: 3,3 x 0,5 x 1,5 m Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm Ljdpfx Asu Nuqujg Aoaf -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20mm -Discharge length (D) 200mm -Discharge height above floor (C) 1020mm -Discharge width 200mm -Insertion length/underfeed length (A) approx. 2000mm -Insertion height (B) 180mm Operation via manual switch Rotating scraper brushes at the discharge and on the left/right side of the infeed beam *

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr Laodpfop Audqjx Ag Aef DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Ledpfxjm Nbube Ag Ajaf

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande Lasdpfovu U Itjx Ag Aef De beste gebruikte machines uit Nederland

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Lasdpoxtp I Iefx Ag Aof Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Number of working hours 270 h electrical ja Lsdpfx Ajq N E U Aog Aeaf

Condition: used, Year of construction: 1991, total length: 10,730 mm, total width: 1,600 mm, total height: 2,400 mm, Colour: Green Empty weight: 12.000 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 0443848 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 625 - Swing over bed [mm]: 1250 - Carriage turning diameter [mm]: 1100 - Distance between centres [mm]: 8000 - Bed width [mm]: 800 - Spindle bore [mm]: 110 - Min. spindle speed [rpm]: 1.8 - Max. spindle speed [rpm]: 355 - Options: Fixed steady, Four-jaw chuck, Three-jaw chuck - Transport dimensions: 10730mm x 1600mm x 2400mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Laodpfx Aoy E Imvog Aof Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 41 kW (55.74 HP), motor manufacturer: Toyota (1ZS), gearing type: automatic, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 45 mm, tire condition: 100 %, front tire size: 7.00-12, rear tire size: 6.00-9, overall weight: 4,040 kg, color: orange, Equipment: CE marking, full service history, head guard, lighting, pallet forks, sideshift, === MAIN SPECIFICATIONS === Year of manufacture: 2023 Operating hours: 0 h (new) Max. lifting capacity: 2500 kg Max. lift height: 5.0 m (5000 mm) Mast type: Triplex (FSV – Full Free Lift) Free lift: Yes (Full free lift) Fork length: 1000 mm Sideshift fork carriage: Yes (Integrated sideshift, IIA class) Drive: Diesel Transmission: Automatic (Torque converter) Cabin: Open (Overhead guard) Tyres: Solid (SE – Super Elastic) Front tyres: 7.00-12 Rear tyres: 6.00-9 Engine manufacturer: Toyota 1ZS (3-cylinder diesel) Lsdpfoynli Sox Ag Aoaf Engine power: 41 kW Emission class: Stage IIIA Weight: approx. 4040 kg (with 5m mast) CE certification: Yes === HIGHLIGHTS === Triplex mast with full free lift (ideal for indoor use with low ceilings) Integrated sideshift with 3rd hydraulic function Heavy-duty 2.5-ton capacity Solid SE tyres for industrial applications Toyota SAS (System of Active Stability) === CONDITION === Brand new machine – unused. Fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable 2.5-ton diesel forklift equipped with a 5.0 meter Triplex (FSV) mast and full free lift, making it ideal for warehouse operations with limited ceiling height. Powered by the durable Toyota 1ZS diesel engine (41 kW), this model delivers strong performance, high efficiency and long-term reliability. With a rated capacity of 2500 kg at 500 mm load centre and integrated sideshift, the Toyota 52-8FDF25 is perfectly suited for logistics, construction and industrial material handling. Equipped with solid SE tyres and Toyota’s SAS safety system for maximum operational stability and safety. Fully inspected, CE certified and ready for immediate deployment. Spare parts and professional support available upon request. === DELIVERY === Crane loading available upon request. Flexible worldwide shipping options available. Transport professionally handled by Collé Rental & Sales.