Various grinding wheels

Unbekannter Hersteller

Condition: used, Speed: 2,700 rpm Motor: 0.24 kW Saw unit including cable and switch. Kodpjw Uz Rrofx Afuodn

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Kdjdjfg Rlcspfx Afusn Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: used, Specification 1: H=35.643 Specification 2: ø 50.000 Kdsdew Ut D Ropfx Afusn Unknown gauge mandrel ø 50.000 mm with taper shank.

Condition: used, Shank diameter: 5 mm Kdedpfx Afsw Uqpksuon Pitch: 22 mm

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min Kjdpfsl Tuvdjx Afuedn -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: new, Width: 100 mm Length: approx. 20 m Timing belt sold by the meter, 100 mm wide, suitable for Reinhardt saws. Kodpfx Afew Uig Ujujdn

Condition: used, Application: Woodworking Diameter: Various Weight: 12 kg Length: Various Kdodpjvy Apiofx Afujn Shank: Various As-new, unused, sharpened, and used shank cutters and drills for CNC machines as exemplarily shown.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Kodpfx Afefx Hv Hjusdn hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Diameter: Various Weight: 4.7 kg Ksdpfx Afsvy Alksusdn Length: Various Shank: predominantly 10 mm As-new, unused and used dowel hole drill bits as shown for reference in the images.

Condition: used, Cutting height ca. 60 mm engine 2,2 connected load frequency 16 A / 400 V Kdsdpfetvb Hhsx Afusn

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel Ø: 175 x 60 x 51 or 125 x 40 x 51 mm Kjdpebx Eliefx Afusdn 2 grinding wheel speeds: 1450/2900 rpm table size: AT-F 205 x 345 mm space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (at 380 V 1/3 power loss), corresponding to 0.6 kW

Condition: used, Cutting height ca. 60 mm engine 1,5 kW connected load frequency 220 V Kjdstvb Hdepfx Afusdn

Condition: used, Quantity: 45 pieces Width: 40 mm Kdodpstr R D Aofx Afuen Height: 50/70 mm Length: 450 mm Hole spacing: 50 mm Lot of near-new polyethylene (PE green) carriers for a block conveyor in a sawmill.

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: Kdedpfx Aou Aw Shefuon - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm