Hydraulic pump

Universal Hydraulik HSSPA-3

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Manufacturer: unknown Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Note: The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Fodpfx Adsvtckmsaopd Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your service team, Mertens & Frowein GmbH

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h Fpsdpswx R T Ejfx Adaod weight max. 8 t weight of the machine ca. 13400 kg

Condition: excellent (used), functionality: fully functional, Loher creel motor 90 KW - 1500 rpm. B 3. shaft diameter 80 mm. Fpjdpfx Ajuy S Tzodaed

Condition: excellent (used), Year of manufacture: 2018 Reach: 1300 mm Payload: 10 kg Robot weight: 28.9 kg Repeatability: ±0.1 mm Gripper: Schunk RH 907 Force sensor joint: AXIA80-ZC22 Software for controlling the above-mentioned devices and cameras (cameras not available) Control: handheld terminal + control cabinet Fpjdpfxowtp Tms Adaod Table not included

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min Fpjdpfx Aepz Sf Nedasd -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg

Condition: good (used), Transport pallets, transport boxes Manufacturer: Zarges Material :Aluminium Quantity: 12 pieces available from stock The boxes have an aluminium pallet with a plate on top as a carrier, the aluminium cover has a circumferential groove with a round seal, Fpedpfxed Tx Dfs Adaed at each corner there are tension locks with which the lid can be securely locked on the pallet. good immediate, ready to use condition immediately available from stock

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump -Manufacturer: HAWE, hydraulic unit -Type: MP 24-H 1.77/B 5-A 1/300- Fpsdpfsivqm Ejx Adasd -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar -Flow rate: 1.73 l/min -Individual components: see photos -Dimensions: 325/160/H295 mm -Weight: 19 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -single acting -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 710 mm -Total length: retracted 850 mm -Hole: Cylinder: Ø 40 mm -Price: per piece Fodeft Aigopfx Adajpd -Quantity: 4 pieces -Dimensions: 850/156/H110mm -Weight: 19 kg/piece

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 006 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 3x pumps available -Price: per piece -Dimensions: 220/90/H120 mm -Weight: 5.3 kg/piece Fsdpfx Adovvic Ueaepd

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. Fpodpfx Ajycfw Eodasd After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.