High pressure pump

Uraca RS716E/350(1)

Condition: excellent (used), Year of construction: 2007, operating hours: 3,114 h, functionality: fully functional, total width: 2,500 mm, total length: 7,100 mm, total height: 2,800 mm, pressure: 1,120 bar, operating pressure: 1,120 bar, fuel: diesel, overall weight: 12,000 kg, rotational speed (max.): 2,100 rpm, water tank capacity: 1,600 l, empty load weight: 12,000 kg, power: 286 kW (388.85 HP), year of last overhaul: 2024, water pressure: 1,120 bar, pump capacity: 111 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 233 in BDF / WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 233 PRESSURE STAGE 1: Operating pressure: 1120 bar Flow rate: 111 l/min. PRESSURE STAGE 2: Fpedpjwyw Dtofx Adaod Operating pressure: 920 bar Flow rate: 131 l/min. Selector/diverter valve with manual switch installed. Drive speed: 2100 rpm Plunger: d30 mm Drive power: 230 kW With 286 kW Deutz BF 6M 1015 C diesel engine With workshop and changing room. Dimensions (LxWxH): approx. 6000x2500x2800 mm Weight: approx. 12,000 kg Year of manufacture: 2007 (HD pump from 2005) Operating hours: 3114 Condition: New plunger seals, fuel and oil filters. The high-pressure pump is in very good used condition.

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Fpsdpfx Adsxufbtsasd Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: new, Year of construction: 2025, Genie GS3246 E-Drive electric scissor lift, new, used - demonstration machines available Fedpfx Ajrqfnfodaspd

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS Fpjdpfsmxkdpsx Adasd MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Fpodpfx Adjg Npiwjajd Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Year of construction: 1999, condition: used, Name: Eccentric Screw Pump Manufacturer: Seepex Type: BN10 Fodpfxoh Tkafe Adaopd Year built: 1999 Material: mild steel Driving force: 9,2 kW Max. operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg Speed: 75 -430 rpm Flow rate: 1,5 -12 m3H Operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Type of protection: 55 Flanges: DN 80 / 100 Condition: Used Technical documentation: no Price: on request

Condition: used, Pillar drilling machines Fodpfx Adeb N Ezroaepd

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev Fpjdpjirax Ujfx Adasd -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post Fpsdsv Ab Dqepfx Adaed - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Empty weight: 2.150 kg Fpodpfx Aetr Iw Hjdaed Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information