Used Ixion 30 for sale (45)

Condition: excellent (used), Year of construction: 2000, Column drilling machine Fabr.IXION Type: BS 30 Year of manufacture: approx. 2000 Spindle holder :MK 3 spindle speed : 160-2800 rpm spindle stroke : 150 mm Gkedetwnv Tspfx Ah Dof Drilling capacity in steel : 30 mm Table: 550 mm X 400 mm With machine vice jaw width 110 mm , drill chuck Röhm 1-13 mm Machine has worked little has only drilled wood . Dimensions: 90 cm X 55 cm X 190 cm Weight: approx. 300 kg.

Condition: good (used), Column Drilling Machine IXION BS 30 Gjdpfx Ahox A Dclo Dskf - Drilling capacity: 30 mm - Spindle taper: MK 3 - Throat depth: 260 mm - Quill stroke: 120 mm - Spindle speeds: 80 - 1500 rpm - Drilling depth stop - Table size: 500x400 mm - Table height adjustment via hand crank - Motor power: 1.1 - 2 kW - Drill chuck - Documentation Dimensions: LxWxH: 0.8x0.7x1.9 meters / Weight: 350 kg Subject to errors and input mistakes.

Condition: excellent (used), Pillar Drill Brand Ixion Type BS 30 MK 4 Spindle Mount Table Size 550 x 405 mm Infinitely Variable Speeds from 16 - 2800 rpm Thrust 280 mm T-Slot Width 16 mm Vise 150 mm BB Drill Chuck 3-16 mm 380 Volt Depth 1000 mm Godpev S Akqsfx Ah Dskf Width 720 mm Height 1950 mm, with pallet 2060 mm

Condition: used, bore capacity in steel (diameter) 32.0 mm Gsdpsxabv Djfx Ah Djkf bore capacity in cast iron 36.0 mm throat 280 mm bore stroke 150 mm turning speeds 80 - 1400 U/min table-size 400 x 550 mm morse taper MK 3 feed 0.1-0.2-0.3 mm/U total power requirement 1.1 / 2.0 kW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug * Machine link: ?machineno=1008-9103736

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump Gksdou Tln Njpfx Ah Dof - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Year of construction: 1992, condition: good (used), machine/vehicle number: 144202, Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - feeds 0,1 + 0,2 + 0,3 mm/rev - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - throat 280 mm - max. distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via toothed rack with hand crank - drive 400 V / 1,4 / 2,3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm Gsdpegbykrjfx Ah Dekf - Weight approx. 360 kg - with: - coolant device - quick-action drill chuck - 20 pcs. HSS div. drill bits 8 - 25 mm

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,900 mm, total width: 600 mm, total length: 900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle stroke: 150 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, input voltage: 380 V, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Gkjdpfjwy Ec Dex Ah Dof Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Overall good condition. Contact us for shipping possibilities! € 2,350.00

Year of construction: 1990, condition: good (used), machine/vehicle number: 0125749, Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm – 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg Gedpfx Ahod Ingfo Dekf

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm Gjdpfxeur H Ehe Ah Djkf - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 Gjdpfeu Aq Amjx Ah Dskf - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg Gksdju Aqz Aopfx Ah Djf

Condition: used, Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit Gjdpfx Ahout Uzao Dskf - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm Gkedpek Tuwvjfx Ah Djf -Weight: 70kg

Condition: good (used), Year of construction: 2008, IXION TL 1001 CNC Deep Hole Drilling Machine Gksdpsx E Si Iefx Ah Djf Year of manufacture: 2008 Control system: MITSUBISHI M530 Machine number: 950521 Drilling depth (Z), CNC controlled: 1,000 mm Drilling unit (Y), vertically adjustable: 800 mm Table size: 1,200 mm x 700 mm Table load capacity: 3,000 kg Table longitudinal travel (X): 1,000 mm Table transverse travel (W): 1,000 mm Table rotation: 360° Spindle: SK 40 Spindle speed: 100 – 4,000 rpm Maximum drilling capacity in steel: 25 mm Maximum thread cutting in steel: M20 Milling in steel is possible Weight: approx. 3,500 kg Equipment: Compact belt filter KBF Electronic handwheel Coolant system Chip conveyor KBF 270 P50 Included in scope of delivery: Deep hole drilling tools Workstation with: Holders / Fixtures / Supports / Sealing discs Operating manual / Documentation Machine parameters on storage medium Equipment, technical data, installation & transport – see PDF. Illustration, content, and information are provided without guarantee and are therefore non-binding. All other accessories visible in photos and videos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories explicitly listed here, in the order confirmation, and the invoice. FCA (Free Carrier Truck Loaded) D-04643 Geithain Packaged only Delivery time: immediately Subject to prior sale / Payment due immediately upon conclusion of sale.

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm Gkjdswywwyepfx Ah Djf - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1991, machine/vehicle number: 148202, Offer 25363 Technical Specifications: - Drilling capacity: 28 mm Godpfxjx E Sp Io Ah Dskf - Drill spindle taper: MK 3 - Drawbar thread: M 12 - Drill spindle speeds – Stage 1: 120 / 215 / 360 / 600 / 1080 rpm – Stage 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height adjustable by hand crank - Minimum / maximum distance table to drill/milling spindle: 60 / 390 mm - Drill spindle stroke: 100 mm - Fine spindle feed adjustment via hand wheel - Drill spindle reach: 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: X-axis 350 mm / Y-axis 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Required space approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Gksdpfjq Dlznex Ah Def Marcels Maschinen AG

Condition: ready for operation (used), Ixion BS 23 STG with thread cutting device Gsdpfxexvzw Ts Ah Djkf

Condition: used, bore capacity in steel (diameter) 40 mm throat 300 mm bore stroke 170 mm 4 speeds 70 - 1400 U/min table-size 600 x 450 mm total power requirement 3,0 kW Gksdpevvnlnofx Ah Dof weight 350 kg dimensions 1200 x 800 x 2150 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Drill chuck

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 950082, drilling depth: 1,000 mm, travel distance X-axis: 1,500 mm, type of input current: three-phase, This machine is equipped with a Bosch CC100 M control system and has a defect. All motors and the drive are in working condition. The machine can be used for retrofit or as a source of spare parts. Gkjdpjx Afbpofx Ah Def

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Gsdswk Nxqjpfx Ah Dekf Good condition

Condition: used, Year of construction: 1970, table width: 220 mm, total width: 700 mm, total length: 960 mm, total height: 1,400 mm, table length: 900 mm, rotational speed (min.): 320 rpm, rotational speed (max.): 1,600 rpm, overall weight: 300 kg, Article number MA1174 Manufacturer IXION Type BT15G Year of manufacture approx. 1970 Machine number 97963 Length [mm] 960 Gsdpfxevutwmj Ah Dekf Width [mm] 700 Height [mm] 1400 Weight [kg] 300 Connection power 380 V Number of tool stations [pcs.] 3 Gearbox [rpm] 320- 1600 Table size [LxW] 900 X 220 Mounting MK 2 Left/right rotation Automatic threading of all 3 drilling units M3 - M10 ST 60. / M3 - M16 GG Accessories Drilling units Height adjustable

Condition: used, sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gsdjxp H Dxspfx Ah Dskf Gewicht / Weight 50kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Godpfx Aorz Tuwsh Dekf Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: used, Year of construction: 1970, machine/vehicle number: 100267, total length: 960 mm, total width: 700 mm, total height: 1,400 mm, overall weight: 300 kg, rotational speed (min.): 1,600 rpm, table length: 900 mm, table width: 220 mm, Article number MA1174 Manufacturer IXION Type BT15G Year of manufacture approx. 1970 Machine number 100267 Length [mm] 960 Width [mm] 700 Height [mm] 1400 Weight [kg] 300 Connection power 380 V Number of tool stations [pcs.] 3 Gearbox [rpm] 320- 1600 Table size [LxW] 900 X 220 Mounting MK 2 Left/right rotation Automatic threading of all 3 drilling units M3 - M10 ST 60. / M3 - M16 GG Godpfx Ajvutwaeh Dekf Accessories Drilling units Height adjustable