Oven

Vötsch VMT 04/140

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, 12 months warranty, in-stock item, immediately available, in top condition. Resistance-heated system with a gas-tight furnace chamber suitable for hardening, soldering, sintering, annealing, ashing, and preheating. -Tmax 800°C -Rod program controller SE-402 -3-zone heating -Gas purging system -Max. gas operating pressure 7 mbar -Gas circulation -Gas purging system, vacuum-tight -Gas purging system -Vacuum system -Note: no safety package installed! -Internal chamber dimensions WxDxH 580x830x1500 mm (special length) Nlsdpfxsyxlwre Alhsc -Chamber volume approx. 722 liters -Max. load weight approx. 1000 kg -Two-stage rapid cooling with frequency converter -Burner with flame monitoring -Automatic shutdown / emergency purging in case of flame failure, but not in case of power failure! -Sight glass DN150 -Max. gas operating pressure 7 mbar -Power supply 400V, 3 phases, N, PE -Heating power 70 kVA -Rated current 3x97A -Weight 1900 kg -External furnace dimensions WxHxD 1700x1950x2750 mm -Control cabinet dimensions WxDxH 510x1360x500 mm -Operating manual, wiring diagrams, CE declaration The furnace is offered as a refurbished unit. Electrically tested, including measurement reports. Inspection in our warehouse by appointment! Not suitable for gas nitriding with NH2/ammonia! Furnace, industrial furnace, melting furnace, annealing furnace, heat treatment furnace, sintering furnace, protective gas furnace, stress-relieving furnace, hardening furnace, chamber furnace, brazing furnace, debinding furnace, dewaxing furnace, relaxation furnace, vacuum furnace, protective gas furnace.

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Nledpfxjxz Divo Alhoc

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm Njdpswwlvlofx Alholc coolant attachment *

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Nlsdpfx Alsxy Ikbohsc

Condition: new, Pressure tanks 270 L/500L/1000L/2000L/,3000L 11bar Nlsdpfxorbyyhs Alhsc

Condition: excellent (used), Year of construction: 1995, Year of manufacture: 1995, sintering vacuum furnace Nsdpfjyq Iy Sjx Alhelc

Year of construction: 2023, condition: like new (used), functionality: fully functional, A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 Nlsdpfx Aor Iig Sjlhjc • Alpine Dry Agitated Media Classifier Mill Pulvis 150 PV • Alpine Aeroplex Spiral Jet Mill 100 AS Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel and wear protection - non product contacting parts: stainless steel, plastic (PE-HM) Wear protection: ceramic and Vulkollan (Polyurethane) Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in wear protected design. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP, 50 ZPS, 100 AS and 150 PV

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2200389185, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,192 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, volume flow: 27.1 m³/h, pump pressure: 3.13 bar, total width: 1,250 mm, total length: 3,540 mm, total height: 2,150 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / chiller air cooled, Type: TAEevo Tech 802 P3 MTA S.p.A. TAEevo Tech 802 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crankcase heater, phase monitoring, electronic injection valves, buffer tank 678 ltr. and built-in P3 circulating pump. Cooling capacity kW 159 Nedpfxsp N D U Ee Alhelc Cold water temp. outlet/ inlet (°C): 7 / 12 Volume flow (m³/h) 27,1 Available pump pressure (bar) 3,13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. Power consumption (kW) 79,48 Max. Current (A) 142,2 Starting current circuit (A) 286,2 Protection class: IP54 Dimensions: Length (mm) 3535, width (mm) 1250, height (mm) 2151, weight (kg) 2192 Connection Rp 3" Serial No.: 2200389185 Year of manufacture 2022 Condition: Optically 2, Technically ok (used) Price: on request in Euro (plus VAT ex Nettetal) - (Subject to technical changes and prior sale!) Location: MTA Germany GmbH, 41334 Nettetal

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C Nledpfeif Sbiex Alhjc -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Year of construction: 2024, condition: new, functionality: fully functional, Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel - non product contacting parts: stainless steel Wear protection: none Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in stainless steel. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP and 50 ZPS. A HOSOKAWA ALPINE Originals machine Nljdpfx Aljugfn Ashjc Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery