Debarker

Valon Kone VK26M

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : Ndodotwrp Dopfx Ab Ueb with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly Ndsdpev Sq S Nofx Ab Ueb • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: reconditioned (used), B., VK26M (model series 1974) with motorized discharge table: - Main machine - Infeed table (driven) - Discharge table Ndedpfofn Iu Ijx Ab Usb - Control cabinet Including infeed and discharge table, workshop inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed = 235 RPM - Rotor opening = 65 cm - 30 kW motor, speed 1500/min - Speed: 17-42 m/min - 3 m or longer (wood length) Dimensions (without infeed and discharge table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorized table): 3170 mm x 1000 mm x 1300 mm RENOVATION: Pos 1: 1 unit: Machine disassembly, washing, sandblasting, priming, and painting, repair, assembly Pos 2: 1 unit: Material - knife axle bearings on the rotor, new bearings and seals (if required) Pos 3: 5 units: Miscellaneous material: V-belt for rotor drive Pos 4: 1 unit: Gear oil Pos 5: 1 unit: Material: Abrasives + paints Pos 6: 4 units: Valonkone peeling knives Pos 7: 4 units: Valonkone pre-separators Pos 8: 1 unit: Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor input with start for 4 kW geared motor output Main starter Emergency STOP

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Ndsdpfx Asivpttob Usb Model -WL6S Main motor -22kw

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock Nodpfx Aox Sxfveb Ujdb 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.

Condition: excellent (used), Year of construction: 2002, Fröling boiler Output: 1250Kw Year: 2002 Nodpfemnqhrex Ab Uodb Burner: Gas or oil burner available on request

Condition: excellent (used), 3 x 4 trolley retorts from recently closed UK Babyfoods factory. 1300mm models. Complete with trolleys and baskets for cooking / pasteurising pouches. We have the complete contents of this factory available. Nedey I Dh Iopfx Ab Ujdb

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Balz BG 90 with feed block conveyor Still in use today Min. log diameter: 140 mm Ndsdpfxsygli No Ab Usb Max. log diameter: 900 mm Shortest wood length: 2000 mm Feed speed: 10 or 16 m/min Rotor with 5 knives

Condition: ready for operation (used), Plant for log processing and sorting, with 2D measuring system KESAT, chain saw and loader LogLift F 165 Z. Infeed Chain conveyors, around the chain saw roller conveyors, sorting chain conveyor. Hydraulicylly driven pushing and lenght stops. Approximate dimensions 20 x 70m. Mesick 92S log measurement frame Control and evaluation PC, Win11 operating system Ndodpfew U Axwsx Ab Uob Data output in .csv format Manufacturer and supplier KESAT, a.s. Installation date 03/2024 LOGLIFT F 165Z - all hydraulic cylinders are refurbished.

Condition: new, Year of construction: 2025, Log decks for band saws Length 4 - 10 m Height according to band saw height 2, 3 or more chainlines with heavy duty chains Nsdpfovt Dk Ijx Ab Uodb Hydraulic or electric gear driven Hydraulic arm with separator for log landing on band saw table Hydraulic arm length 800 - 1500 mm depending from band saw Hydraulic driven chain on hydraulic arm for log movement