Center lathe

VDF HEIDENREICH & HARBECK M530

Condition: used, Year of construction: 1971, height of centers: 265 mm center distance: 1500 mm max. circulation-Ø over bed: über Bett 540 mm spindle boring: 65 mm spindle retainer: Gr. 8 Gkedpfx Ahourirde Dsf retainer taper tailstock: 5 MK spindle speed: 9 - 1800 rpm forwarding feed: längs/plan 0,063-2,24/0,032-1,12 mm/U thread pitch: 0,35 - 560 mm electrical connection: 380 V, 11 kW space needed: 4580 x 1250 x 1330 mm weight: 3200 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union Gksdpfsxgnz Tjx Ah Dsf - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: used, Year of construction: 1972, Center height 265 mm Center width 1000 mm Swing diameter over bed 540 mm Swing diameter over cross slide 280 mm Bed width 403 mm Spindle bore 65 mm Spindle mount DIN 55027 Gr. 8 Speed range, 24 levels 9 – 1800 rpm Feeds, 32 longitudinal 0.063 – 2.24 mm/rev ditto, 32 face 0.032 – 1.12 mm/rev 66 metric threads 0.25 – 560 mm 60 Whitworth threads 80 – 1/16“ 60 module threads 0.1 – 50 module 40 diametric pitch threads 160 – 0.5 pitch Tailstock mount MK 5 Drive power 15 kW Dimensions L x W x H 3550 x 1300 x 1550 mm Weight 2800 kg Gjdpjpmtf Uofx Ah Dekf Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2010, Working container / Gross volume 350 Liter useful volume 176 Liter workpiece sizes max. 220 mm turning speeds 1000 / 1500 U/min total power requirement 2.6 KW weight of the machine ca. 633 kg original price in 2010 approx. 35.000 euros Special price on request Description: Gkjdpfjxz Hh Ijx Ah Dsf - WALTHER TROWAL rotary vibrator with flat container base - Suitable for polishing, smoothing, or deburring components - For bulky, large-volume, but also sensitive workpieces - Wear protection lining made of molded hot PUR - Flexible control and dosing technology - Pneumatic separator flap actuation - Extra-long screening zone - Original operating instructions Equipment: - WALTHER separate control unit - WALTHER sound insulation cover with bracket - WALTHER ZM 03 ECO process water purification system * Purification of process water from oils and dissolved metals * Using centrifugal force * Water savings of up to approx. 98% * Compound savings of up to approx. 90%

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, Technical Data – HERMLE C 40 UP Control System: - Heidenhain iTNC 530 - Travel X/Y/Z: 850/700/500 mm Options: - Heidenhain DNC - DXF Import - Kinematic Opt iTNC Main Spindle: - Speed: 18,000 rpm - Tool Holder: HSK-A63 Tool Magazine: - Additional Magazine ZM43 Feed / Axes: - Linear guideways – Dynamic Version - Table variant: NC-SRT Ø 420 mm, worm gear drive - Table axis: A-axis offset from center - Table specification: Pallet clamping system Coolant System: - Internal coolant supply 80 bar - Coolant filter type: Paper band filter for internal coolant system Chip Disposal: - Scraper belt conveyor Cab / Safety: - Base structure - Automatic cabin door - Manual roof cover - Laminated safety glass window Electrics: - Frequency: 50 Hz - Country key: DE Pallet Automation: - Pallet changer: PW160, 400 × 400 mm - Pallet storage MMS / Measuring Systems: - External MQL (Minimum Quantity Lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Prepared for additional touch probe Software / Options: Gkjdpsxx Rxrsfx Ah Djf - Event Messenger - Tool identification HSK - Machine license: TCS-Soflex - System monitoring Free Accessories: - Electronic thermal compensation - Electronic hand-held control module - Oil mist extraction (prepared & with post filter) - Flange for oil mist extraction - Sealing air for scales - Chip washdown gun - Bed flushing - Internal & external air blast - Signal light - Test documentation - Test protocol: C 40 iTNC 530 PW160

Condition: new, Year of construction: 2025, Machine type: EVT 130 Manufacturer: ERBA Power kW: 1.1 Total volume: 130 l Description: The EVT 130 long-tank vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Emptying or separation is performed via bottom discharge (manual/pneumatic). By using partition walls, the working tank can be divided into compartments, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be equipped with a fully automatic PLC process control system. On request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The stated price is net, plus the currently applicable statutory VAT and shipping costs. The images may show the system including optional accessories, which are available at extra cost. The stated price refers to the base machine. The photos are for illustration purposes only. The actual appearance and size may differ from the images. If you are interested, we look forward to your enquiry. We will be happy to offer you detailed and non-binding advice. The European Commission provides a platform for online dispute resolution (OS platform). Gkedpfx Ajx Ag Hyjh Def This offer solely serves to present our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding offer, which will also inform you about our general terms and conditions, our imprint, and your right of withdrawal, before any purchase/contract is concluded.

Condition: good (used), Crane system, ceiling mounting 2 mobile rails, one motor per rail (Abus and Demag) Gedpsxav Stsfx Ah Dskf System without suction lifter Total length of system: 24000 mm Width of system: 6000 mm