Universal machining center
DMG MORI DMU 60 evo

Name: DMG MORI DMU 60 evo
Brand: DMG MORI
Availability: InStock

Year of construction

2014

Condition

Used

Location

Trittau

Universal machining center DMG MORI DMU 60 evo

Show map

Machine data

Machine type:: Universal machining center

Manufacturer:: DMG MORI

Model:: DMU 60 evo

Year of construction:: 2014

Condition:: excellent (used)

Functionality:: fully functional

Operating hours:: 66,600 h

Price & Location

Location:: Nikolaus-Otto-Str. 21, 22946 Trittau, Deutschland

Call

Technical details

Equipment:: chip conveyor, documentation/manual, rotational speed infinitely variable

Details about the offer

Listing ID:: A20098750

Update:: 30.09.2025

Description

We offer you the following:

Technical Data:

Control: Heidenhain iTNC 530 HSCI

Travel distances:
- X-axis: 600 mm
- Y-axis: 500 mm
- Z-axis: 500 mm

Main spindle:
- Speed range: 20 - 18,000 rpm

NC Rotary Table:
- Clamping surface: 600 x 500 mm
- Load capacity: 400 kg
- B-axis: -5° to +110°
- C-axis: 360°

Tool changer:
- Tool holder: HSK-A63
- Number of tool pockets: 210 positions

Equipment and Accessories:
- Heat exchanger for spindle and table
- Active cooler for control cabinet
- Direct measuring system
- Full enclosure
- 3D control
- DMG ERGOline Control
- Direct measuring systems in the NC rotary/swivel table incl. table cooling
- BLUM NT laser tool measurement
- Calibration arbor with tool holder
- Infrared probe, Heidenhain TS 649
- Preparation for 3D quickSET
- Hinged belt chip conveyor
- ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing
- Rinsing pistol
- Mechanical oil and emulsion mist separator
- Air blast through spindle center
- Mode of operation 4
Duedpfexgnz Tox Afpsn
- Machine preparation for handling systems, consisting of:
- Automatic, lateral loading door
- Electrical interface for articulated arm robot
- Pneumatic control and monitoring of the zero-point clamping system
- Activation/deactivation of handling system via switch on machine operator panel
- Additional rinsing in the machining area included
- Preparation for job management included
- Operator panel arrangement on the left included
- Power supply to machine table incl. 2-channel rotary union
- Additional machine-side clamping hydraulics, 1 clamping circuit:
- Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology
- Extension of rotary union to 4 channels included

On-time hours: approx. 66,600 h
Spindle hours: approx. 44,800 h

The robot shown in the pictures is not included in the scope of delivery.
The machine is expected to be available from October/November 2025.
The ball screw drives and linear guides in the X and Z axes have been replaced.

Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information.
Subject to changes and errors in the technical specifications and information. Prior sale reserved!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2018

19 listings online

Call

Send inquiry

Telephone & Fax

+49 4154 ... show

These listings may also fit your interest.

Listing

Eggstätt

6,603 km

Universal machining center
DMG MORIDMU 60 eVo

Call

Condition: used, Year of construction: 2012, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Travel: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range -5° to +110° C-axis 360° Maximum loading weight: 400 kg, direct measuring systems including table cooling Dynamics package: linear drive on X / Y axes Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active cooler for main spindle, linear drive, and table Dsdpfeyc Tthex Afpsun Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm HSK-A63 according to DIN 69893 • Tool magazine: chain magazine with 60 tool stations • Tool length measurement and breakage control: Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted sieve, internal coolant supply (IKZ) paper filter 40 bar 231 l/min, 600 l tank including rotary viewing window, sealing air for linear systems, bed flushing • Blowing air through spindle center selectable via M function, maintained air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing system • Laminated safety glass panels for working area door and side window • Operating mode 4 • High speed settings • Measuring probe: Blum HSK-A63 • Prepared for 3D QuickSet • Optionally oil mist extraction unit • New spindle at 25,800 spindle hours

See details

Listing

CNC lathes Haas TL-4 Ø 1350 x 2000 mm CNC

Deinze

7,244 km

CNC lathes
Haas TL-4Ø 1350 x 2000 mm CNC

Call

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Dia of spindle bore: 270 mm!! Dujdpfxswu Ipis Afpjn Power on the spindle: 55 HP Number of speeds: 1 > 500 rpm

See details

Listing

Kumla

6,578 km

Universal machining center
DMG MORIDMU 60 eVo

Call

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, overall weight: 10,000 kg, PREMIUM LISTING – DMG MORI DMU 60 eVo (2017) | 5-Axis | TNC 640 | 120 Tools | Automation-Ready | 40 bar Duedpfx Afeygky Tepon Overview Offered for sale is a high-specification DMG MORI DMU 60 eVo 5-axis machining centre, Made in Germany, equipped with a robust configuration suitable for demanding production requirements. The machine is automation-ready, making it ideal for lights-out manufacturing and future integration of pallet or robotic systems. Key Highlights • Year: 2017 • Control: Heidenhain TNC 640 (ERGOline® Control, 19” screen) • 5-axis NC swivel rotary table (B-axis -5° to +110°, C-axis 360°) • 120-position tool magazine • High-speed spindle up to 18,000 rpm, SK40 BIG-PLUS • Automation-ready + extended M65 interface • DMG MORI geometric inspection protocol available Configuration & Options (as equipped) Control / Software / Operation • Heidenhain TNC 640, ERGOline® Control, 19” display • Operating mode 4 – process monitoring in production • Electronic handwheel 5-Axis Table / Measuring • NC swivel rotary table 600 × 500 mm • B-axis -5° to +110°, C-axis 360° • Max load: 400 kg • Direct measuring systems (rotary axes) • Renishaw OMP60 optical infrared probe Spindle / Tooling / Magazine • Spindle interface: SK40 BIG-PLUS 18,000–20,000 rpm 35 kW (40% ED) / 25 kW (100% ED) • Tool magazine: 120 positions (chain magazine with double gripper) • Tool breakage detection TRS2 (contactless detection; suitable for small diameters) Coolant / Chip Management / Enclosure • Internal coolant supply (IKZ), 40 bar (paper band filter tank 600 L) • Chip conveyor • Extended chip flushing (additional flushing of work area) • Chip wash gun • Spindle centre air blast (selectable via M-function, conditioned air with low oil content) • Rotating safety window (rotating viewing pane) • Oil & emulsion mist separator (mechanical) • Automation Ready • Extended M65 interface Connectivity / Service • DMG MORI Messenger (installation kit for machine connection) • DMG MORI Netservice client (remote diagnostics support via external PC)

See details

Listing

Machining Center - Universal DMG MORI DMU 60 EVO

Grüsch

6,800 km

Machining Center - Universal
DMG MORIDMU 60 EVO

Call

Listing

Emmelshausen

6,961 km

Milling machines
DMGecoMill 600 V

Call

Condition: used, Year of construction: 2016, Milling machines Duedpfx Asvtfp Eofpjn Travel distance X: 600 mm Travel distance Y :560 mm Travel distance Z: 210 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Siemens 840D_sl spindle chuck: SK 40 spindle revolutions: 12000 rpm table size X: 900 mm table size Y: 560 mm max. workpiece weight: 400 kg tool changer: 30 - time feed rate: 30000 mm/min

See details

Listing

Aflenz Land

6,381 km

Universal machining center
DMG MORIDMU 60 eVo

Call

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 24,000 rpm, operating hours of spindle: 17,917 h, number of slots in tool magazine: 60, Equipment: rotational speed infinitely variable, Machine Description: - Universal 5-axis milling machine with linear drives in the X and Y axes, achieving 80 m/min traverse speed - Spindle and machine geometry in excellent condition - Regularly serviced - Last spindle replacement: 08/2020 / New control panel installed: 09/2025 - Current machine hours: Power ON: 58,985 h / Spindle ON: 17,917 h - Machine location: Lower Austria (near Vienna) Travel paths: X-axis (longitudinal): 600 mm Y-axis (cross): 500 mm Z-axis (vertical): 500 mm Clamping Table / Work Area: Integrated NC rotary table: 600 x 500 mm Table load capacity: 400 kg CNC Control: Heidenhain iTNC530 Spindle: Speed range: 24,000 rpm Tool interface: HSK63 Coolant System and Chip Disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Chip conveyor, scraper belt design Automatic Tool Changer: Tool interface: HSK63 Number of tool pockets: 60 Dimensions and Weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: approx. 9,800 kg Additional Equipment and Accessories: › Heidenhain TS 649 probe › Heidenhain handwheel › Blum laser for tool measurement on the table › Chip flushing gun › 3D Quick Set › ATC cycle package › Operating mode 4 › Integrated oil mist extraction Duodpfx Aoya U Ibsfpen › Operating manual / documentation › Dynamics package for linear drive, 80 m/min, incl. active cooler

See details

Listing

Thurmaston

7,548 km

Universal machining center
DMG MORIDMU 60 eVo

Call

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, C axis 0.001 degrees Rapid feedrates 80m/min, Dusdpfxewnpzae Afpon 120 station toolchanger, spindle taper HSK 63 spindle speed 20,000rpm, Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant

See details

Listing

Milling machining centers - vertical HWACHEON Vesta 1050B

Wilbertoord

7,086 km

Milling machining centers - vertical
HWACHEONVesta 1050B

Call

Listing

Wölzing-Fischering

6,411 km

Universal machining center
DMG MORIDMU 60 evo

€1,57,000

fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, DMG-Mori DMU 60 Evo Linear Control: Heidenhain ITNC 530 HSCI Dujdpfxoxvhtnj Afpon NC swivel rotary table 600 mm x 500 mm B-axis swivel range: -5° to +110° C-axis 360°, including table cooling Spindle speed: 20 - 24,000 rpm, HSK 63 A Tool magazine with 120 positions Infrared measuring probe Renishaw OMP 60 Dynamic package, Laser tool measurement ICS with 40/80 bar, with paper band filter 980 l, chip conveyor Electronic handwheel, 3D Quickset ATC, programmable coolant nozzles via M-function Operating mode 4 Tropic package

See details

Listing

Gerstetten

6,778 km

Universal machining center
DMG MORIDMU 60evo

€1,27,000

fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, rotational speed infinitely variable, DMG-MORI DMU 60 EVO linear Year 2014 Travel X/Y/Z: 600 mm x 500 mm x 500 mm Motor spindle SK40 with 18,000 rpm NC tilting rotary table, B and C axes Tool magazine with 60 stations Heat exchanger for spindle and table Dynamic package Control: Siemens 840 D SL with Shop-Mill Infrared probe Heidenhain TS 649 Blum laser tool measurement Dujdpfx Afexvhrwopon Scraper belt conveyor, HPC with paper band filter and 80 bar Oil mist emulsion separator Programmable coolant nozzles Electronic handwheel, mode 4 Turning and milling cycle

See details

Listing

CNC Cylindrical grinder STUDER S33 Studer S33

Saint-Genix-les-Villages

7,118 km

CNC Cylindrical grinder STUDER S33
StuderS33

Call

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, center height: 175 mm, type of input current: three-phase, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1 rpm, feed length X-axis: 285 mm, feed length Z-axis: 800 mm, overall weight: 4,000 kg, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, input voltage: 400 V, CNC Cylindrical grinder STUDER S33 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC 21i-TB Software installed: StuderGrind Centre distance: 650 [mm] Height of centers: 175 Stroke X axis: 285 [mm] Min. Stroke speed X axis: 0.001 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 800 [mm] Min. Stroke speed Z axis: 0.001 [mm/min] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.0001 [mm] B axis swivelling stroke: -15 [°] / +195 [°] B axis indexing precision: Hirth 1 [°] Workpiece spindle nose: MT5 Workpiece spindle min. speed: 1 [rpm] Workpiece spindle max. speed: 1500 [rpm] Max. part weight in part holder headstock between centres: 80 [Kg] Type of attachment tailstock: MT3 Tailstock quill stroke: 35 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4000 [Kg] Duodexywhpopfx Afpen INCLUDED EQUIPMENT: x1 internal grinding spindle type 102560B – speed: 60,000 [rpm] x1 hydraulic swiveling dressing attachment x1 fixed dressing unit mounted on the table x1 rotating wheel dressing unit (electrical) x1 3-jaw chuck Ø170 [mm] - MT5 x1 4-jaw chuck Ø170 [mm] - MT5 x1 magnetic chuck Ø170 [mm] - MT5 x1 2-point steady rest x1 pneumatic tailstock lift x1 pneumatic upper-table lift x1 longitudinal slide with rotary table - swiveling up to 8.5 [°] x1 automatic B-axis turret wheelhead – Hirth gearing 1 [°] x1 C-axis for thread and form grinding x1 workpiece probe MOVOMATIC C25 x1 contact control device DITTEL SENSITRON 6 x1 semi-automatic wheel balancing device MPM type BMT100M x1 paper filtration unit ARO TECHNOLOGIES type 5491.246A01 x1 mist extraction unit AIR-FRESH SERVICE type FMN-V12 x1 foot pedal x1 electrical cabinet air conditioner x4 external grinding wheel flanges x1 set of lifting equipment x1 axis bracket (for transportation of the machine) x1 set of operating manuals (French, English, and German) More information upon request.

See details

Listing

5 ACHS machining center DMG MORI DMU 60 Evo

Friesenheim

6,938 km

5 ACHS machining center
DMG MORIDMU 60 Evo

Call

Condition: good (used), Year of construction: 2014, operating hours: 21,000 h, functionality: fully functional, DMG MORI DMU 60 Evo 5x simultaneous axis machining center (2014) Manufacturer: DMG Mori Type: DMU 60 Evo 5x simultaneous axes Dodpfswp Ic Eox Afpoun Year: 2014 Condition: good, used, new spindle in 2024 Operating hours: 37,063h Spindle hours: 21,313h Control: Heidenhain ITNC 530 Condition: used, ready for operation Travel x/y/z 600/500/500 mm Rapid traverse 80m/min Speed 20-14,000 rpm Tool magazine 30 Tool holder SK40 NC rotary tables 600x500mm Coolant supply 40 bar with band filter system Measuring probe TS649 Documentation

See details

Advertise here