Gas fired bogie hearth furnace

VEI-Engineering VEI_HWO35/40/15

Condition: used, Year of construction: 2014, Technical details: max. wheel diameter: 150 mm gear width: 350 mm max. module: 4 total power requirement: 48 kW weight of the machine ca.: 13 t Pgjdpfjxtbmisx Aphsr dimensions of the machine ca.: 4,88 x 4,40 x 3,56 m spindle turning speed range: 100-1000 U/min Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. *

Condition: excellent (used), Year of construction: 2013, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,020 mm, For sale is a 5-axis machining center from the world market leader, GROB. Model G550 with pallet changer. Year of manufacture: 2013. Location: Switzerland. The machine is in unparalleled, extremely good condition, has been used very little, and was only used for experimental purposes in an experimental toolmaking department. Control system: Siemens SINUMERIK 840D sl Machining type: 5-axis simultaneous machining Horizontally arranged motor spindle Swiveling rotary table Automatic pallet changer Travel distances: X-axis: 800 mm Y-axis: 950 mm Z-axis: 1,020 mm Rapid traverse rates: X-axis: 65 m/min Y-axis: 50 m/min Z-axis: 80 m/min Maximum axis acceleration: 9 m/s² Maximum feed force: 8 kN Positioning accuracy: Positioning uncertainty X/Y/Z: 0.006 mm Repeatability X/Y/Z: 0.004 mm Main spindle: Motor spindle Tool interface: HSK-A63 / SK 40 Maximum spindle speed: 16,000 rpm Spindle power ED 100 % / 40 %: 25 / 35 kW Maximum spindle torque ED 100 % / 40 %: 160 / 223 Nm Spindle bearing diameter front: 80 mm Chip-to-chip time: approx. 4.2 seconds Tool magazine: Pick-up disk magazine Tool interface: HSK-A63 Number of tool positions: 60 Maximum tool length: 465 mm Maximum tool diameter without restriction of adjacent positions: 72 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool weight: 8 kg Maximum tilting moment: 12 Nm Workpiece area: Maximum pallet load: 700 kg Maximum table load: 800 kg Maximum workpiece diameter: 800 mm Maximum workpiece height: 900 mm Pallet system: Automatic pallet changer Pedpfx Apjzp Rqishogr Pallet size: 630 x 630 mm 2 pallets Coolant and media supply: High-pressure internal coolant system: 80 bar Minimum quantity lubrication: Lubrix V7 Switching between MMS and coolant Pressure booster: 10 bar Compressed air storage tank: 20 liters Chip conveyor Coolant and filter system Electrical connection data: Connection voltage: 3/PE 400 V AC Frequency: 50 Hz Rated current: 55 A Fuse rating: 160 A Power requirement: at least approx. 42 kVA Required air pressure: approx. 5 bar Machine weight: Approx. 24,000 kg including pallet changer Equipment: 5-axis simultaneous machining Siemens SINUMERIK 840D sl Motor spindle with 16,000 rpm HSK-A63 tool interface Automatic pallet changer Pallets 630 x 630 mm Tool magazine with 60 positions High-pressure internal cooling 80 bar Minimum quantity lubrication Lubrix V7 Pressure booster Compressed air storage tank Chip conveyor Coolant and filter system

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, MCOSMOS with GEOPAK module (CAD-assisted evaluation). Software - MCOSMOS 3 CNC V4 Equipment: PH10MQ probe head (incl. FCR25 quick-change rack). SP25M scanning probe system with 5-piece probe module set. MCOSMOS 3 CNC V4 incl. dongle (Wibu-Box). CAT1000PS V4 (CAD comparison and evaluation). Software upgrade MCOSMOS-1 from V2 to V4. GEO-EDM add-on module for eroded parts. Part-program generator and GEO-EDM assistant. Pgedpfx Aex H Nn Repher

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm Pgjdpfx Aswm Rm Iephsr length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Pgjdpsnkb Urofx Apher Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: normal Front tyre type: Non Marking Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Pgedpfx Ajw U E Uuephjr Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Sideshift, 3rd valve, rear work light, front work light,

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Machine type: Mitutoyo STRATO 9106 FAL-A910 Podpfx Apjqz T H Ajhsgr Year of manufacture: 2001 Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Accessories: Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Modifications and errors in the technical data and information as well as prior sale are subject to change!

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Pjdoh Akm Tepfx Aphjgr

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Podpfodzqb Eox Aphogr Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Pgjdpfx Ajyy Nx Nephor Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons