Gantry Crane Crane Crane Track Crane

Vetter Stahl 4000KG 4t 6,5m x 2,6m Kranhimmel Portalkran + Stahlbau + Kran

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Knjdjfi Tmcopfx Af Sjd

Year of construction: 2019, condition: refurbished (used), fiber laser cutting machine power: 3000W table size: 3000x1500mm pallet changer Siemens controller with touch screen Siemens drives THK guides Precitec Procutter auto focus torch IPG resonator chip conveyor CE offered with: warranty CAD / CAM software Knodpfx Aohturnof Sjd setup delivery (optional) training this machine can be tested under power any time. please contact us

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Knedeqt Dmyspfx Af Sjd

Condition: ready for operation (used), Load capacity: 5000kg. Knsdpot H Rfbsfx Af Ssd

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Kjdpfjhlp Iwox Af Sjnd Sale excluding warranty.

Condition: used, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low-bed trailer, low-loader trailer, low-bed trailer for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Front axle load: 8,000 kg Middle axle load: 8,000 kg Rear axle load: 8,000 kg Knodpst N Antofx Af Ssd Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with frame removed and tarpaulin pushed forward) - Spare wheel mounted on the front wall - Separate lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – extendable in multiple stages - Very robust lashing points on the outer frame and in the centre of the vehicle - ALU loading ramps: length 268 cm, width 410 mm, height 130 mm (surcharge 2,000 EUR net) This vehicle was purchased by us as a new vehicle, is first-hand, is registered and currently in use by us. Very good condition.

Condition: ready for operation (used), Year of construction: 2012, Wheel Loader Liebherr L 507 Stereo III, year of manufacture 2012, 7477 operating hours, folding bucket, forks, serial no. VATZ1109JZB030051, service has been renewed (oil filter, air filter, engine oil), slight oil leak on the rear axle. Kjdjin I N Uopfx Af Ssnd

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT136, ! bargain price ! Price from 1150 euros Knjdpfx Aeigl R Rsf Sjd R. Stahl 1-girder suspension crane, bridge crane, crane track, indoor crane, gantry crane Payload 250KG 7 cranes available: 4: Steel suspension crane NL 250KG, width 6.35m, track width 5.6m 5: Steel suspension crane NL 250KG, width 2.65m, track width 1.9m 6: Steel suspension crane NL 250KG, width 4.85m, track width 4.35m 7: Steel suspension crane NL 250KG, width 2.90m, track width 2.35m 9: Steel suspension crane NL 250KG, width 6.0m, track width 5.5m 10: Steel suspension crane NL 250KG, width 1.03m, track width 0.74m (1150 euros) 11: Steel suspension crane NL 250KG, width 1.65m, track width 1.25m Track width can be changed, end carriers are screwed with 8 screws. Tracks (IPE 200 - not available) Undercarriages can be adjusted to the carrier dimensions. incl. complete control, floor operation by means of a control bottle All cranes can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction 2003 Very good condition, systems were only used for maintenance - hardly used Shipping by courier, collection preferred Location 75053 Gondelsheim Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: used, Pillar drilling machines Knodpfx Afob N Ezre Sjd

Condition: used, Steel construction for crane system Width: approx. 8,5 m Length: approx. 7,95 m Plant dismantled The plant is sold "as is". Kedpfxebruzge Af Send Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no return possible.