VIET sander

Viet

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 1,300 mm, 1 bottom calibrating sander equipped with 3 bottom belts Chedpfsw A A Enjx Ab Uoa 30, 22, 18.5 kW 1 top calibrating sander equipped with 3 top belts

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units Csdpsxnpczefx Ab Ueha - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: ready for operation (used), Year of construction: 1993, Automatic sander VIET Mod. Rita 4C EL Fixed plane moving heads Working width 1350 mm Working height 4 – 160mm Nr 03 suction hood depressors diameter 150 mm Belt feed speed 6 – 20 with 3 kw inverter Hood carpet cleaning brush diameter 120 mm Composition: 1st transversal polishing unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 2nd roller sanding unit mod. R320 – 40 rubber coating 40° SH Sanding belt 3250 x 1400 mm Speed 1.5 – 12.5m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 3rd buffer polishing group mod. TE 60 electronic pad 60 sectors Sanding belt 3250 x 1400 mm Velocity 2.9 – 14.1m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 4th cross sanding unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 5th scotch-brite group Engine kW 0.55 Chedjltlx Tspfx Ab Uja Suction hood diameter 140 mm 6th brush unit Engine kW 0.55 Suction hood diameter 140 mm 7th panel cleaning rotary blower group

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, working width: 1,300 mm, overall weight: 4,700 kg, height adjustment type: electric, Wide-belt sanding machine Manufacturer: Viet Type: S3 223 TM Year of manufacture: 2006 (CE) Well-maintained calibrating and fine-sanding machine from a small carpentry/manufacturing workshop, suitable for sanding solid wood, veneer, and lacquered surfaces. Working width: 1300 mm Constant table height, motorized height adjustment of the machine’s upper part (the machine is also suitable for inline operation). Automatic workpiece detection, thickness measurement, and infeed protection. 1x cross-sanding unit, sanding belt dimensions: 150 x 5520 mm 1x combination unit with calibrating roller and electronic segmented sanding shoe, segment pitch: 25 mm 1x cleaning brush for removing dust from workpieces 1x ionizer to prevent static charging Chjdpjzd Aylsfx Ab Uja Feed rate infinitely adjustable Vacuum transport for small, short, or slippery workpieces (e.g., lacquered parts) Operating voltage: 400 V, 50 Hz, 3 phases Dimensions: approx. 2500 x 2850 x 2280 mm (L x W x H) Weight: approx. 4700 kg

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Chodjnah Tdspfx Ab Uoa Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 1995, 2 grinding aggregates with 22kW motors each Cleaning brush Smooth feed regulation Vacuum suction of the workpiece Powered receiving roller table Chedehxvi Eepfx Ab Uoa

Condition: used, machine/vehicle number: 007614, Max. machining width: 1300 mm Chsdpfex A Tatsx Ab Usa Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Codpfx Ash T Dzqob Usha Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Chjdpfx Aox A Tayob Uea Position 2: Top Sanders VIET-S3 - VALERIA

Condition: used, machine/vehicle number: 007613, Max. machining width: 1300 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr Chodpfx Asx A Tagjb Uja

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual operation. Csdpfx Aefiugueb Ueha Drive power: 5.5 kW Polishing disc diameter: 1000 mm

Condition: ready for operation (used), Year of construction: 2010, working width: 1,350 mm, Belt sander manufactured in 2010. This VIET S3 333 features a working width of 1350 mm and accommodates workpiece thickness from 3 to 160 mm. It includes three sanding units with powerful 4 kW motors and a conveyor group speed of 3-16 m/min. If you are looking to get high-quality sanding capabilities, consider the VIET S3 333 belt sander we have for sale. Contact us for further details. • 1st Sanding Unit (Composition): Spinbrush • 1st Sanding Unit (Motorization): INV 4 kW • 2nd Sanding Unit (Composition): Brush • 2nd Sanding Unit (Motorization): INV 4 kW • 3rd Sanding Unit (Composition): Brush • 3rd Sanding Unit (Motorization): INV 4 kW • Conveyor Group: 3–16 m/min • Conveyor Group (Motorization): INV 3 kW • Adjustment/Rise (Motorization): MTR 0.37 kW • Vacuum Pump (Motorization): MT 4 kW • Mass: 4170 kg • Workpiece Thickness: 3–160 mm • Operating Voltage: 3 AC - 400 V • Frequency: 50 Hz Chjdpfx Aboyu Tfze Uea • Current Draw: 48.9 A • Motor with Max Current Draw: 8 A • Minimum Compressed Air Pressure: 6 - 86 bar-Psi • Maximum Compressed Air Pressure: 8 - 116 bar-Psi • Compressed Air Consumption: 1441 Nl/min • Minimum Suction Flow Speed: 25 m/s • Minimum Suction Capacity: 6190 m³/h • Noise Level (Idle): 75 dB(A) • Noise Level (Operating): 76 dB(A)

Condition: used, HESS HYDRO frame press – used Manually hydraulically operated, Hydraulic cylinders arranged horizontally, Csdpezkkdljfx Ab Usha Hydraulic cylinders arranged vertically ----- Technical data ----- Press width: 4,000 mm, Press height: 2,550 mm, Cylinder stroke: 150 mm, Motor: 1.1 kW

Condition: excellent (used), functionality: fully functional, Weinig Powermat 500 four-sided planer Working width 230mm Working height 160mm Chsdpfxovfr Rgo Ab Uoa Number of spindles 6 Spindle arrangement: Bottom 5.5kw 8000r.p.m Right 5.5kw 8000r.p.m Left 7.5kw 8000r.p.m Top 7.5kw 8000r.p.m Bottom 7.5kw 8000r.p.m Universal 5.5kw 8000r.p.m Spindle #6 equipped with power lock system Feed speed adjustable by inverter up to 30m/min Pulling rollers in the worktop (1 grooved roller for wet wood) Electro-motorized positioning of height and working width Pneumatic material stops Drive on karda shafts Total power 41kw Year of production 2005 CE certificate

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) Chsdpozlxp Sjfx Ab Uea • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.