Voest Alpine DA160 Lathe Turning machine

Voest Alpine DA-160

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Gbedpfx Ajma Snxoh Hsg

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Gbedpewdihrofx Ah Hsg Accessories

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder Gedpfortd Uwox Ah Hsbg - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Gedpfxov Aywpj Ah Hjbg

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Gedpfxed I A Dhs Ah Hsbg Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm turning diameter over slide rest 325 mm turning length 1500 mm spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min Godow Ny S Depfx Ah Hebg total power requirement 9 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With Multifix incl. 2 holders, chuck, rotating center and DRO.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, Gbodpfx Ajthd Sheh Hsg We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Gsdedzqblspfx Ah Hobg Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: good (used), Year of construction: 1992, 1 used lead and feed screw lathe Manufacturer: Weiler Model: Condor B Godpsw Rcd Sofx Ah Hebg Year of manufacture: 1992 Technical specifications: Distance between centers: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital readout 3-jaw chuck Chuck guard

Condition: good (used), Year of construction: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled X/Z axes Gbjdpfxew Hxi Do Ah Heg TECHNICAL DATA Turning Length: 540 mm Spindle: Motorized spindle 11/16 kW Tool holder: VDI30 with 12 AC motors - Speed: 5,000 rpm - Spindle Nose: A2-6" main spindle - Drive Power (100/40% duty cycle) 11/16.5 kW Turret: 12-station - Driven: 12 stations - Tool holder: VDI 30 EQUIPMENT FEATURES + Technology cycle for applying alternating speed for vibration-critical setups + Direct X-axis position measuring system + Programmable positioning and Pressure force. + Ergonomic DMG MORl SLIMline® control panel + Hollow clamping device, max. bar capacity D65 mm + Tailstock, hydraulically movable via M-function + External electronic handwheel + Chip disposal package: + Chip conveyor with right-side discharge instead of the chip tank + 4-color signal lamp + Differential pressure clamping for the main spindle + Foot control pedal for tailstock + Automatic NC tailstock: Maximum machining flexibility - full force control in the range of 0.7 - 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar + Manual tool measuring device in the work area, made by MARPOSS + Mechanical oil mist separator type AFS 600 Subject to changes and errors in technical data and information.