Special purpose truck

VOLVO FH 500 8x2 Kran F710 RA2.26

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,220 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 crane F710 RA2.26 Winch preparation available Volvo: New model * Electro-hydraulically steered trailing axle, single tires * FH sleeper cab * 5600 mm wheelbase * Exhaust emissions according to Euro 6 Stage E, with SCR, particulate filter and exhaust gas recirculation * Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) * Complies with ADR braking regulations * I-Shift AT2612F, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm * Liftable axle * Rear axle RSS1370A, single ratio, 13 t axle load, GZG 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Info and media package with navigation Cgedpfx Aexpzfqjbcjn * Radio reception: AM/FM * USB connection, 3-way * 8 loudspeakers * High instruments: digital driver info display, 12'' with 4 views * Second driver info display, 9" bdisplay * TOMTO navigation system * AGM batteries, 2 x 210 Ah * Battery indicator in the display (volts, amps and battery status with warning function) * Main switch on the chassis * 330 L aluminum tank on the right, D-shaped, 710 mm high, 830 mm long * Fuel tank, normal ground clearance * AdBlue tank on the left, usable capacity 64 liters * Lockable fuel filler cap * Tank filler neck, spill protection * Exhaust direction to the rear * 2 foldable wheel chocks, transport mounting * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to frame end 85 mm * Frame length rear 4395 mm, measured from drive axle/1st drive axle * Trailer coupling Rockinger 400 G-150 (note D-value/max. trailer load!) * Electrical connection for semitrailer/trailer, 15-pin * Trailer/semitrailer connection Duomatic * Trailer connections in the middle * Stationary trailer brake (active up to 7 km/h) * Underride guard hi, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle * Electric bleed pump * Transmission/I-Shift operation via control unit on the driver's seat * I-Shift driving mode: Standard, Performance and Economy * Autoreturn in Economy mode * No manual intervention in automatic mode, without kickdown * Cruise Control (cruise control) * Transmission oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air requirement * Front air intake with normal air filter * Alternator 150A/4200W * External noise in accordance with ECE R51.03 Phase 2, with low-noise certificate and L plate * Closed crankcase ventilation * Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe * Fuel filter with water separator * PTO (medium-speed PTR-DM), on transmission side, connection: 1 DIN at rear for pump * NA on gearbox, max. output 600 Nm * Dynamic equipment: seats in fabric, yl (blue/dark blue) with interior in gray fabric Comfort driver's seat, air suspension, heated, seat belt in seat * Standard front passenger seat, air suspension * Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net * Cab heater, 2 kW * Storage space under the bunk * Cool box with freezer compartment 33 L under the couch *

Condition: used, mileage: 2,30,556 km, power: 368 kW (500.34 HP), first registration: 09/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, total length: 10,320 mm, total height: 3,450 mm, loading space length: 6,430 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Differential lock - Remote central locking - Lift axle - Air suspension - Towing jaw coupling - PTO (power take-off) - Radio - Reversing camera - Disc brakes - Sun visor - Lane departure warning system - Auxiliary heater - Toolbox = Notes = Volvo FM 500 6x2*4 Lift and steering axle Full air suspension HMF 3220 K7 4 x hydraulic outriggers 7 x hydraulic extensions Scanreco radio remote control 4.70 m - 5,910 kg 6.50 m - 4,000 kg 8.40 m - 2,870 kg 10.30 m - 2,170 kg 12.40 m - 1,710 kg 14.50 m - 1,400 kg 16.70 m - 1,190 kg 18.90 m - 1,040 kg = Further Information = Technical Information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steering; Left tire tread: 80%; Right tire tread: 80% Rear axle 1: Tire size: 295/80R22.5; Twin tires; Left inner tread: 80%; Left outer tread: 80%; Right inner tread: 80%; Right outer tread: 80% Rear axle 2: Tire size: 385/55R22.5; Steering; Left tire tread: 70%; Right tire tread: 70% Weights Unladen weight: 16,537 kg Payload: 11,463 kg Gross vehicle weight: 28,000 kg Cgedpev Uin Ijfx Abcjn Functional Crane: HMF Environment Emission class: Euro 6c Financial Information Price: On request Identification Type number: FM500 / 6x2 / HMF 32TM / CRANE / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We strive to provide correct information, but no rights can be derived from the texts provided.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,220 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 crane F710 RA2.26 Winch preparation available Volvo: New model * Electro-hydraulically steered trailing axle, single tires * FH sleeper cab Csdsxitbwopfx Abcogn * 5600 mm wheelbase * Exhaust emissions according to Euro 6 Stage E, with SCR, particulate filter and exhaust gas recirculation * Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) * Complies with ADR braking regulations * I-Shift AT2612F, automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm * Liftable axle * Rear axle RSS1370A, single ratio, 13 t axle load, GZG 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Info and media package with navigation * Radio reception: AM/FM * USB connection, 3-way * 8 loudspeakers * High instruments: digital driver info display, 12'' with 4 views * Second driver info display, 9" bdisplay * TOMTO navigation system * AGM batteries, 2 x 210 Ah * Battery indicator in the display (volts, amps and battery status with warning function) * Main switch on the chassis * 330 L aluminum tank on the right, D-shaped, 710 mm high, 830 mm long * Fuel tank, normal ground clearance * AdBlue tank on the left, usable capacity 64 liters * Lockable fuel filler cap * Tank filler neck, spill protection * Exhaust direction to the rear * 2 foldable wheel chocks, transport mounting * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to frame end 85 mm * Frame length rear 4395 mm, measured from drive axle/1st drive axle * Trailer coupling Rockinger 400 G-150 (note D-value/max. trailer load!) * Electrical connection for semitrailer/trailer, 15-pin * Trailer/semitrailer connection Duomatic * Trailer connections in the middle * Stationary trailer brake (active up to 7 km/h) * Underride guard hi, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle * Electric bleed pump * Transmission/I-Shift operation via control unit on the driver's seat * I-Shift driving mode: Standard, Performance and Economy * Autoreturn in Economy mode * No manual intervention in automatic mode, without kickdown * Cruise Control (cruise control) * Transmission oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air requirement * Front air intake with normal air filter * Alternator 150A/4200W * External noise in accordance with ECE R51.03 Phase 2, with low-noise certificate and L plate * Closed crankcase ventilation * Double fuel filter on the engine, large for poor fuel quality, e.g. in Eastern Europe * Fuel filter with water separator * PTO (medium-speed PTR-DM), on transmission side, connection: 1 DIN at rear for pump * NA on gearbox, max. output 600 Nm * Dynamic equipment: seats in fabric, yl (blue/dark blue) with interior in gray fabric Comfort driver's seat, air suspension, heated, seat belt in seat * Standard front passenger seat, air suspension * Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net * Cab heater, 2 kW * Storage space under the bunk * Cool box with freezer compartment 33 L under the couch *

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Csdorhzy Hopfx Abcjgn Technical check : OK Pas de télécommande de la grue

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector Cedewuppwspfx Abcjgn 5-arm wood rack Safety devices and protective guards

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide Cgodpfx Abergzv Nscjn * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: like new (used), functionality: fully functional, machine/vehicle number: ZCFC635C805516960, mileage: 80,000 km, power: 132.39 kW (180.00 HP), first registration: 01/2023, fuel type: diesel, maximum load weight: 750 kg, tire size: 195/75 R16C 110/108R, wheelbase: 4,100 mm, energy efficiency: D, color: white, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 400 mm, Year of construction: 2022, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, crane, cruise control, fog lights, onboard computer, power assisted steering, soot filter, Serviced exclusively at authorized IVECO workshops. Available for test drive. Warranty from 12 to 48 months at advantageous rates. Euro 6D HI-MATIC 8-speed automatic transmission 3 seats in the cab Driver airbag Cgsdjw Ducuepfx Abcjn Suspended and heated driver’s seat Manual air conditioning Fog lights Bluetooth DAB car radio with steering wheel controls Adaptive cruise control Assisted braking system Fixed body Copma 35.3 crane with 3 hydraulic extensions Front pole carrier stand Removable rear pole carrier stand Winches for cable tensioning Reinforced leaf springs

Condition: excellent (used), mileage: 1,17,563 km, fuel type: diesel, color: red, lifting height: 36,500 mm, first registration: 05/2015, mast type: telescopic, Year of construction: 2015, = Additional options and accessories = - PTO (Power Take-Off) = Additional information = Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel Dimensions (L x W): 1,103 x 255 cm Cgjdpfeuxu Dyox Abcjn Functionality Mast length: 35.2 m Lifting capacity: 40,000 kg Superstructure brand: TADANO ATF 40G-2 CE marking: yes Condition Technical condition: very good Visual condition: very good TADANO ATF 40G-2 CRANE CHASSIS: 279 HP 4x4 drive 117,563 km Automatic transmission Air conditioning, refrigerator Tire size: 445/95/R25 Mercedes-Benz OM 906 LA engine UPPER STRUCTURE: Heating 3 wooden blocks 20t each 1 wooden block 10t Min/max boom length: 10.5 m / 35.2 m Max. lifting capacity: 40,000 kg Maximum hook height: 36.5 m Full counterweight All documents and papers available CE certificate Follow us on Instagram: geurtstrucks We speak German We speak English Hablamos Español

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: 9.23.12.102733-12 The equipment of the K2: a 4-axis universal milling machine 2 drilling rigs a finger cutter below a slotter Hydraulic beam turning station Cedpfxswvih As Abcsgn Machine is fully working, can be visiited upon agreed time. avaible from 30/11/2025 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Videos show the machine in operation. Csdpjxftalsfx Abcjgn