Generator set

Wärtsilä W6L20

Condition: ready for operation (used), Further information will follow. Kedpfx Asqzx Dqjansfa Accessories: Separator frame (stainless steel) 1200 x 1000, separator drum, motor, tool kit, documentation

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Manufacturer: Alfa Laval Model: ALDEC 406 Kfodpfx Aaovz Dddjnea Mach. No. 512-0006.01 Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h Kfjdew Ap I Ajpfx Aansa ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Minimum capacity: 10,000 L/H Offer of 4 identical units Max bowl speed: 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 KW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares and manual Year of Manufacture: 2017

Condition: used, Used 5.9 MW Wartsila Vasa 18V32DF dual fuel cogeneration plant built in 1998 with ABB HSG 900 LS8 generator. Plant includes: Kedpfew U A I Ejx Aanefa - Wartsila VASA 18V32DF engine. This is a turbo-charged, intercooled four stroke gas engine with direct pilot fuel injection with the following specifications: Vee configuration, 18 cylinders, 320mm cylinder bore, 350mm stroke, 750 rpm, 2 inlet valves/cylinder, 2 outlet valves/cylinder, clockwise rotation and nominal output of 5901 kWm. - ABB HSG 900 LS8 generator. This is a self-cooled, 3-phase, brushless, synchronous, two bearing type generator with the following specifications: 7235 kVA, 0.8 power factor, 11000 V, 380 A, 50 Hz, 750 RPM, 900 RPM, insulation class F, IP21 protection and IEC34 standard.

Condition: used, Year of construction: 2000, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph This HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). This machine handles bottle formats up to 2 liters and produces up to 2700 bottles per hour (bph). Moreover, the system uses a 4+4 configuration, meaning four upper and four lower cavities, which optimize production with a symmetrical and highly efficient design. You can access this machine starting mid-October. Kjdpfxjvgvkaj Aanjfa Main Technical Features of the HDPE Blow Molding Machine TECHNE SYSTEM To ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. Mold Configuration and Flexibility Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specific production needs. Upon request, you can also add accessories or make necessary modifications, which we offer at separate quotations. Additionally, our technicians, who manage the disassembly, can reassemble the machine, thereby ensuring continuity and reliability in operations. Manuals and Technical Documentation This blow molding machine comes with complete technical manuals and detailed schematics, which will assist you during installation, maintenance, and daily operations. More specifically, the documentation provides detailed specifications regarding container tolerances and operational schematics of system components. As a result, the design optimizes critical values like bottle spacing and the distance between extruders and the container body. Production and Performance This Used Blow Molding Machine supports production capacities ranging from 2400 to 2700 bottles per hour, depending on operating conditions and container types. Therefore, it allows you to maintain a steady output rate. In terms of precision, the mold-carriage stroke extends to 660 mm, allowing well-calibrated movements that ensure production uniformity. Consequently, the machine can produce bottles up to 290 mm wide and 690 mm tall. Conclusions of the HDPE Blow Molding Machine TECHNE SYSTEM The Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph, available from mid-October, provides a versatile and highly efficient solution for companies that require a high production capacity. Additionally, you can customize the system by adding accessories upon request. As a result, the flexibility in mold configuration allows you to adapt the machine to a wide range of production demands. Lastly, the machine ensures operational efficiency due to its reliability, and the availability of technical support for both assembly and disassembly further enhances its performance.

Condition: new, Year of construction: 2013, power: 1,480 kW (2,012.24 HP), total length: 8,000 mm, total width: 2,200 mm, total height: 2,250 mm, Electrical output in KVA: 2360 KVA Kfodpjw Tiyfjfx Aanea Frequency: 50/60 Approx. weight in kg: 11,000 kg Extra information: DNV approved, HFO fuel possible

Condition: used, mileage: 8,09,500 km, power: 330 kW (448.67 HP), first registration: 10/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, M-Benz Actros MP4 1845 4x2 Tractor Unit VIN: L807835 Chassis / Attachments * Wheelbase: 3,700 mm * Leaf/Air suspension * Tyres: Front 385/65 R22.5; Rear 315/80 R22.5 * Remaining tread depth: approx. 70% * 1 x Combination tank (Diesel/AdBlue), aluminium * 1 x Hydraulic tank, aluminium Cab Equipment * BigSpace cab * DTCO 4.1 tachograph * 2,500 mm, flat floor * SoloStar concept * 2 beds * Refrigerator * Stationary heating * Automatic climate control * Stationary air conditioning * Cruise control * Radio CD * BT / AUX / USB Kfjdpfxjxgy T Us Aansa * Leather steering wheel * Adaptive cruise control * Lane-keeping assist * Advertising light box * 2 x air horns Engine / Transmission * 330 kW // 449 hp // 12,809 cc // Euro 5 * PowerShift 3 // automatic transmission * Retarder * Differential lock Weights * Gross vehicle weight: 18,000 kg * Payload: 9,972 kg * Kerb weight: 8,082 kg Other * 1 previous owner * German vehicle * General inspection & safety inspection valid until 09/2026 New general inspections, safety inspections, as well as reduction or increase of weight rating are possible on request. We are happy to assist you with obtaining export/temporary number plates and can arrange transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide range of vehicles. Our corporate philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a dedicated contact person to support you during the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arrangement of special transports We are happy to assist you in organizing special transports. Temporary/export number plates We are happy to assist you in obtaining export/temporary number plates. Customs clearance We are happy to assist you with customs formalities.

Condition: good (used), approx. 4 pieces h.a.l.m. Solar cell measuring system, cetisPV-CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device - second-hand -: Kodeukiu Nepfx Aanefa Price per unit ex location: 8.350.-€ (net) Complete device IV measuring system Manufacturer: H.A.L.M. Type: cetisPV Consisting of: CTL1 cetisPV-XF2-C cetisPV-XF2-R cetisPV-XF2-P Complete device Year of manufacture: unknown Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony