Eccentric Press - Single Column

W.P. MUELLER 45

Condition: new, Year of construction: 2025, Band width: max. 38 mm Iodpfxs Ea U Hs Abcotd Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm Iodpfxovpaakj Abcetd pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm - gr. installation height 220 mm - ram surface 240 x 150 mm - mortise in ram 30 mm - ram adjustability 40 mm - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet Isdpfxsktg Dhs Abcjtd - drive 380 V / 1,1 kW - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg

Condition: good (used), max. tapping capacity, metric thread brass M33, cast iron M16, steel M14, incl. accessories Itsdsibmn Ejpfx Abced

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm Itodpfx Abowc U Izecjd coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Iodpfx Ajt A Ar Sebcetd Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Itedst A Arljpfx Abcsd Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 1989, saw blade diameter 320 mm cutting diameter 140 mm Itodpfx Ajw Dvivjbced total power requirement 3 kW weight of the machine ca. 0,5 t

Condition: refurbished (used), Power at 50%: 20kVA Short circuit-current: 19kA Electrode force: 187daN / single stroke Throat depth: 160mm --- Weld control: TE 91 (12-times, 2-program) --- Iodpfxoxl U Auj Abcstd Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm metric thread M 33 Messing metric thread M 16 Gußeisen Isdpeul Eg Defx Abcotd metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten throat 220 mm weight 730 kg