Spot welding machine

TECNA 2102

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Hjdpfepugwisx Aa Soff Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 Hfjdpfxou Ngu Se Aa Sef *

Condition: used, mileage: 75,000 km, power: 70 kW (95.17 HP), first registration: 04/2012, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2012, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sales price: €9,950 Mercedes Benz Sprinter MAXI – Box Body (SAXAS) Euro 5 Emissions Standard Please no emails, as they can only be checked sporadically due to time constraints! Thank you for your understanding! Opening Hours and Further Information: Viewings and purchases possible without appointment: No prior arrangement necessary! Mon – Thu: 9:00 – 16:00 Fri: 9:00 – 13:00 Sat: 9:00 – 12:00 Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, please contact Christian Hirsch or our friendly staff. TÜV: Will be renewed upon request with purchase - Full service history - 1 owner - LED interior lighting - Interior motion sensor - Sliding door between cab and box body - Reversing camera (see photos) - Various ventilation outlets - Foldable shelves - Electrically locked doors - Rear step Cargo space length: 4.40 m Cargo space height: 2.00 m Cargo space width: 2.00 m Special equipment: - Hill start assist - 220 A generator - Mechanically adjustable steering column - Radio pre-installation - Front mud flaps Hfodpfxewcv Dws Aa Sjf - Rear stabiliser - Reinforced front stabiliser - 95 Ah AGM battery Additional equipment: - Adaptive brake light - Driver airbag - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors (both sides) - Exterior mirrors with integrated turn signals - 74 Ah battery - Brake assist - Braking system with ABS and ASR - Roof trim in cab - Lockable glove compartment - Body type: box body - Main fuel tank: 75 L - Headlight range adjustment - Truck registration - Engine: 2.1L – 70 kW CDI - Wheelbase: 4,325 mm - Smoker’s package - Tire repair kit with compressor - Low emissions according to Euro 5 - Seat upholstery: Lima fabric - Service interval indicator Assyst - Heat-insulating glazing - Permissible gross weight: 3.5 t For questions: Christian Hirsch Please try calling repeatedly as we are often in customer meetings. Further offers available at our website. Equipment details have been determined using VIN lookup; technical errors may occur. All information provided online is non-binding and for general description only. They do not constitute guaranteed specifications. Seller is not liable for typographical or data transmission errors, changes, or input mistakes. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm Hfodpfx Aer Nfvmsa Ssf For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm - 4 spindle speeds - Directional switch - 3-knife cutter block - Planing length: 1400 mm - 3 motors, each 3 kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ Hsdpfx Aexdknwoa Sjff

Condition: excellent (used), Year of construction: 2003, The machine has very few working hours and has been in storage for many years) Performance: Hole diameter and thickness up to max.: approx. 28×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angle 100x 100 x 10 Flat steel up to max.: 300 x10/ 200×13 mm (See also rating plate in the appendix). Machine weight: approx. 750 kg Hfedpfxsupzf Ro Aa Sof Various punches are also included with the machine

Condition: excellent (used), foot operated, water cooled swing lever spot welding machine make DALEX type SF 16/71 Hedjimd I Aspfx Aa Sjff rated power at 50 % ED: 16 kVA Sec. short circuit current: 17 kA electrode force: 278 daN arm throat: 180-500 mm arm distance: 140 or 300 mm with 8-step switch Asychron 1-time welding control Example photo Machine is in refurbishment Current time 3-100 Per

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface Hodjvppw Sjpfx Aa Seff -High operating comfort

Condition: excellent (used), 3-phase direct current spot welding machine DALEX type PMS 11-4 G 3 Rated power at 50 % ED: 96 kVA Hfsdpehmvawjfx Aa Sjf Sec. short-circuit current: 44.5 kA Sec. open-circuit voltage: 4.72 V Electrode force: 100-600 daN arm reach: 550 mm with add-on control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 weight: 740 kg

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Hfedpfo Ea U Hsx Aa Sef Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.